A25972mdr Parts

A replacement 3/8-16 nut that secures fasteners and assemblies on compatible Whirlpool appliances. Restores proper fastening so panels, brackets and components stay tight and aligned during normal operation. What it does:

• Fastens and secures bolts, studs or threaded shafts in appliance assemblies.
• Prevents loose connections that can cause rattling, vibration or misalignment.
• Used where a 3/8-16 threaded nut is required for structural or mounting applications.
• Replaces missing, stripped or corroded nuts to restore reliable mechanical connection.

• Disconnect power and follow all appliance safety procedures before servicing.
• Inspect mating threads and remove debris; replace if threads are damaged.
• Thread onto bolt or stud by hand first, then snug with the correct wrench; avoid overtightening.
• Follow the appliance manufacturer's torque and assembly instructions.

Size: 6 foot long. Washers not included. This is one hose, for a set with washers order 285363. For inlet hose screen use 285452A and for inlet hose washers use 285448A

This hose coupling connects a flexible appliance hose to the appliance plumbing, restoring a secure water connection and preventing leaks. Ideal when a worn or damaged coupling causes drips or loose hose fit. What it does:

• Provides a secure connection point between an appliance hose and the appliance inlet
• Replaces cracked, broken or corroded couplings that can leak or allow the hose to detach
• Restores proper hose sealing to reduce water drips at the connection
• Compatible with the original inlet connection type and mounting orientation

• Turn off and disconnect appliance power and shut off the water supply before replacing
• Remove the old coupling and clean the mating surfaces; inspect hose and clamps for wear
• Use proper clamps and hand-tighten; avoid over-tightening which can damage fittings

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

• Fastens panels, trim, or mounting brackets to restore proper alignment
• Helps eliminate rattling or vibration caused by loose or missing screws
• Replaces corroded or damaged hardware to maintain safe operation
• Restores secure attachment for parts that no longer hold in place

• Disconnect power to the appliance before starting any repair
• Use the correct driver bit to avoid stripping the screw head
• Tighten until snug; avoid overtightening which can strip threads or damage parts

A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:

• Secures a mating bolt or stud to prevent loosening from vibration or movement
• Restores a solid attachment for panels, brackets, or assemblies that may come loose
• Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
• Suitable where a locking fastener is required to maintain a reliable connection

• Disconnect power and follow appliance safety procedures before starting work
• Locate the matching stud or bolt and remove the old fastener if present
• Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
• Inspect threads and mating hardware for damage; replace damaged components

This pump belt transfers motor power to the washer drain pump so the machine can remove water reliably. It's a direct-replacement belt designed to restore proper pump operation when the old belt is worn or damaged. What it does:

• Drives the washer drain pump so water is removed during the drain/spin cycle
• Replaces a stretched, glazed, or broken belt that causes slow or no draining
• Helps stop belt-related squealing, slipping, or unusual pump noises
• Restores normal pump engagement when the belt is the source of failure

• One pump belt

• Disconnect power before servicing to avoid shock or injury
• Basic hand tools are typically required; access usually involves removing the washer cabinet or access panel
• Inspect pulleys and pump for wear when replacing the belt; replace damaged components as needed

This is a replacement drive belt designed to restore reliable belt-driven operation in compatible appliances. It replaces worn or damaged belts to help the appliance tumble or agitate as intended. What it does:

• Transfers motor power to the appliance's drum or agitator so the unit can tumble or wash
• Stops slipping or squealing caused by a stretched or glazed belt
• Helps restore normal drum/agitator rotation when a broken belt prevents movement
• Reduces wobble or intermittent operation related to a failing belt

• Disconnect power to the appliance before beginning any service
• Follow the appliance service manual for routing, tensioning, and idler placement
• Inspect pulleys and idler/tensioner for wear; replace if damaged to protect the new belt
• Use proper tools and safety gear

This genuine replacement pushbutton knob restores a damaged or missing control knob so you can operate your appliance's push-to-select controls easily and reliably. It matches the original shape and finish for a clean, factory look. What it does

• Replaces a broken, cracked, or missing pushbutton knob to restore button-tactile control
• Provides the correct fit and engagement for the appliance's panel-mounted pushbutton switch
• Helps prevent dirt and debris from entering the button assembly
• Matches factory color and finish for a consistent appearance

• One white pushbutton knob

• Disconnect power to the appliance before starting any repair
• Most installs are simple: pull off the old knob and press the new knob onto the button shaft until it seats
• If needed, use a small flat tool gently to lift an old snapped piece;

Export motor.

A small flat mounting washer that secures fasteners and provides a stable spacer for assemblies. Replaces worn or missing washers to restore proper part alignment and prevent movement. What it does:

• Acts as a flat spacer under a nut or bolt to distribute load and prevent loosening
• Keeps components aligned and properly spaced to reduce wear
• Helps stop rubbing or metal-on-metal contact that can cause noise or damage
• Commonly needed when fasteners are loose, panels shift, or assemblies wobble

• One flat mounting washer

• Shut off power to the appliance before beginning any service
• Remove any panels or components necessary to access the fastener; use hand tools appropriate for the fastener type
• Replace the washer with the same orientation and retighten the fastener to avoid over-torquing

The Water Level Pressure Switch Hose is an OEM part for Whirlpool washing machines. It connects the water level pressure switch to the tub, allowing the switch to accurately detect and control the water level during washing cycles.

Common causes of a bad pressure switch hose include wear and tear over time, blockages from detergent buildup or debris, and kinks or cracks that disrupt the pressure flow.

Symptoms of a bad Water Level Pressure Switch Hose include:

• Incorrect water levels during wash cycles
• The washing machine not filling or overfilling
• Leaks around the hose area
• Error codes related to water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.