Agr5630bds Parts

Color: Black   Note: Right side endcap

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and reducing movement. It's a direct-fit structural support used where panels or assemblies need a stable attachment point. What it does:

• Secures panels, trim or internal assemblies to the appliance cabinet to prevent shifting or sagging
• Restores proper alignment to reduce vibration, rattling or scraping noises
• Helps maintain door and panel fit for correct operation and appearance
• Used when a broken, bent or missing bracket causes loose or misaligned parts

• Disconnect power and water before starting any repair
• Verify bracket orientation and location against the appliance before tightening
• Use original mounting hardware when possible; inspect screws or clips and replace if worn

This is a threaded machine screw used to fasten appliance panels and components. It restores secure attachment points so panels, brackets, and assemblies stay firmly mounted and reduce rattling or misalignment. What it does

• Secures panels, brackets, or small components to the appliance chassis
• Restores loose or missing fasteners that cause vibration, rattling, or unsecured parts
• Provides the correct thread engagement to prevent stripped holes when installed properly
• Works wherever an 8-18 threaded screw is specified by the manufacturer

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or nutdriver to avoid stripping the head.
• Do not overtighten; snug until secure to prevent damage to threads or panels.
• Follow manufacturer service instructions for safe disassembly.

Color: White.

This electronic control board is the main console logic module that manages cycle selection, timing, and user interface functions to restore normal operation and control of your appliance. What it does:

• Receives input from buttons/knobs and runs selected wash/dry cycles
• Manages timers, displays, and signals to motors, valves, and heaters
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Works with sensors and other modules to coordinate appliance functions

• One electronic control board

• Disconnect power to the appliance before beginning any service
• Handle the board carefully and avoid static discharge; use grounding precautions
• Some disassembly of the console or access panels may be required; keep hardware organized

This orifice holder assembly secures the burner orifice and helps regulate gas flow for a consistent cook flame. It replaces a worn or damaged holder to restore proper burner alignment and reliable ignition. What it does:

• Holds the gas orifice in position at the burner for stable flame delivery
• Ensures correct spacing between orifice and burner for consistent ignition
• Helps reduce uneven flames or burner misalignment that can affect cooking
• Used when the holder is cracked, bent, or no longer secures the orifice

• Turn off gas supply and disconnect power before servicing; follow local codes.
• Handle small parts carefully and verify orifice seating during reassembly.
• Do not force parts; inspect nearby seals and valves for related damage.

This heat shield protects oven or range components from direct heat, helping prevent damage to nearby panels and wiring. It's a direct-replacement exterior shield used when existing metal shields are warped, cracked, or missing. What it does:

• Diverts and dissipates heat away from control panels, insulation, or adjacent components
• Helps stop heat-related discoloration, warping, or premature wear of nearby parts
• Restores proper clearance and airflow around the oven cavity after shield damage
• Commonly replaced when you see scorched areas, melted trim, or gaps where a shield once sat

• One heat shield (exact shape and mounting holes as shown in OEM diagram)

• Disconnect electrical power (and gas, if applicable) before starting any repair
• Remove oven racks and any trim panels to access the shield; keep track of fasteners
• Compare the replacement to the removed part to confirm fit before fastening
• If mounting hardware is damaged or missing, procure correct OEM fasteners — only the shield is guaranteed to ship

This mounting bracket secures internal components to the appliance cabinet, helping keep parts aligned and stable for reliable operation. It replaces a worn or broken bracket to stop movement and reduce noise. What it does:

• Secures panels, assemblies, or components to the cabinet to prevent shifting
• Restores proper alignment of attached parts for correct operation
• Helps reduce vibration, rattling, and intermittent contact caused by a loose bracket
• Prevents sagging or misalignment that can interfere with doors, drawers, or moving parts

• One mounting bracket

• Disconnect power (unplug or shut off breaker) before starting any repair
• Access may require removing exterior panels or covers; keep track of fasteners
• Use common hand tools (screwdriver, nut driver) and tighten hardware securely
• Replace only with the exact part number for a correct fit and function

This is a replacement Holder for securing the ORF assembly in the appliance. It restores support and alignment to the ORF component so the assembly stays properly positioned and reduces movement or noise. What it does:

• Secures the ORF assembly to the appliance frame to maintain proper alignment
• Helps prevent rattling, shifting, or sagging of the attached component
• Restores stable operation of the ORF-related parts and improves fit
• Can address symptoms such as loose or misaligned parts and unusual noises

• One Holder

• Disconnect power to the appliance before starting any repair
• Follow the appliance service manual for exact removal and replacement steps
• Keep small fasteners and clips organized during disassembly

This wire harness routes power and signals between controls and components to restore correct electrical connections. It replaces a damaged or worn harness to help appliances regain reliable operation and reduce electrical faults. What it does:

• Connects control board, switches, and powered components so they can communicate and receive power
• Restores broken, burnt, or loose wiring paths that cause intermittent or lost function
• Helps resolve symptoms such as controls or indicators not responding, elements or motors not powering, or intermittent operation
• Maintains insulated, organized wiring to prevent shorts and improve safety

• Disconnect all power (unplug or shut off breaker) before starting any repair
• Compare connectors and wire lengths to the original harness before installing
• Route harness to avoid sharp edges and moving parts; secure with existing clips or ties