Apfo Ed25cqxfw Parts

This window kit provides the exhaust pass-through and adjustable panels needed to vent a portable air conditioner through a window, helping direct hot air outside and reduce room heat buildup. What it does:

• Forms a sealed opening in a sliding or vertical window for the AC exhaust hose
• Secures the exhaust hose to the window to prevent disconnection or leaks
• Helps block drafts and outdoor air from entering around the exhaust opening
• Reduces hot air recirculation back into the room when the AC is running

• Designed for use with compatible portable air conditioners; follow the appliance manual for proper placement
• Measure your window opening and adjust panels for a snug fit before tightening
• Use appropriate fasteners for your window type; avoid drilling into window frames that could impair operation
• Disconnect power to the appliance before making any adjustments near the exhaust connection

This exhaust duct directs dryer exhaust from the appliance to the home vent system, keeping exhaust airflow contained and helping prevent lint and moisture leaks. It's a direct-replacement duct section for affected dryer vent assemblies. What it does:

• Channels hot, lint-laden air from the dryer to the household exhaust vent
• Prevents exhaust leaks that can cause poor drying performance or moisture build-up
• Reduces lint escape at the cabinet-to-vent connection when installed correctly
• Helps maintain proper airflow when combined with a clear, unobstructed vent path

• Disconnect power before servicing the dryer; for gas models, shut off the gas supply and follow safety procedures
• Use proper clamps or HVAC foil tape to secure duct joints and prevent leaks
• Inspect and clean surrounding venting and lint traps while the duct is replaced

This flat exhaust duct connector helps link a low-profile exhaust outlet to the home ducting for improved airflow path in tight installations. It provides a low-profile transition that reduces kinks and keeps exhaust moving efficiently. What it does

• Creates a flat/low-profile transition between the appliance exhaust outlet and the house ductwork.
• Helps reduce air restriction where a standard round duct won't fit.
• Can reduce vibration and rattle caused by misaligned duct connections.
• Commonly replaced when the existing connector is cracked, bent, leaking, or preventing proper venting.

• One flat exhaust duct connector.

• Disconnect power to the appliance and follow all safety precautions before servicing.
• Remove old connector and clean the duct opening; verify correct orientation before attaching.
• Secure with appropriate clamps or UL-listed foil duct tape; avoid using cloth or non-approved tapes.
• Check the connection for leaks and clear any lint or debris after installation.

This drain plug seals the washer drain opening to prevent leaks and direct water flow into the drain system. It restores a proper seal so the appliance can drain reliably and helps avoid water pooling under the unit. What it does:

• Seals the washer drain opening to prevent water leaks at the base
• Directs discharged wash water into the drain system for proper drainage
• Common symptom fix: water pooling under or around the washer after a cycle
• Common symptom fix: intermittent leaking from the bottom/front of the cabinet

• Disconnect power and water supply before servicing.
• Access may require removing the rear or front lower access panel depending on model.
• Inspect mating surfaces and any gaskets; clean debris before installing for a proper seal.
• Hand-start the plug, then snug—avoid over-tightening to prevent damage.

This replacement refrigerator water filter cartridge helps restore clearer, better-tasting water and ice by trapping common contaminants. It fits inline in the fridge filter housing and provides the same function as the factory-installed cartridge. What it does:

• Filters water to reduce taste and odor issues caused by common impurities
• Helps improve the clarity of ice and drinking water
• Restores proper filtered dispensing when old or clogged filter causes slow flow
• Simple cartridge-style design that seats into the factory filter housing

• One replacement refrigerator water filter cartridge

• Turn off water supply and dispense remaining water before removing old cartridge
• Press/release or twist per the fridge's filter housing to remove and install the cartridge
• After installation, flush water lines by dispensing several cups until clear

This handheld remote control operates the portable air conditioner's basic modes and settings so you can change temperature, fan speed, and timer from across the room. Designed as a direct replacement for the original remote. What it does:

• Sends infrared commands to control power, mode (cool/fan/dry), temperature and fan speed
• Lets you start or stop the unit and set timers without using the unit's onboard controls
• Restores remote convenience when the original remote is lost, damaged, or unresponsive
• Matches factory functions and button layout for straightforward use

• One replacement handheld remote control

• Install or replace the batteries (check polarity) before first use
• Point the remote at the unit's IR receiver and keep line-of-sight for reliable operation
• If the remote does not work, verify batteries and that the unit's IR receiver is unobstructed
• For model-specific pairing or troubleshooting, refer to your owner's manual