Bosch Hdi8064u/01 Parts

This programmed control module is the appliance's main electronic board. It coordinates inputs, outputs, and cycle logic—replacing a failed module restores proper control response and consistent operation.

• Serves as the central control board that manages overall appliance functions and timing
• Interprets user selections and sensor signals to run the correct cycle or mode
• Distributes power to components as designed by the manufacturer
• Typical failure symptoms include no power to controls, won't start, cycle not advancing, or recurring control-related error codes

• Disconnect power to the appliance at the breaker before servicing
• Use ESD protection and handle the board by its edges to avoid static damage
• Photograph connectors and transfer any brackets or mounts from the original board as needed
• Follow the service manual for your unit

The Spacer is an OEM part for Bosch ranges. This part is designed to prevent metal-on-metal contact, reducing noise and wear by providing a cushioning buffer at strategic locations on the range. The bumper helps protect the range's finish and integrity by absorbing impacts that can occur during use, such as when closing the oven door or moving the range for cleaning.

Causes of a bad spacer can include deterioration from heat exposure, which can lead to hardening and cracking, or physical damage from impact or excessive force used during appliance movement.

Symptoms of a bad spacer include:

• Increased noise during door operation
• Visible damage or wear to the appliance where the bumper is installed
• The bumper becoming loose or falling off
• Scratches or other damage appearing on surfaces that should be protected

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Latch is an OEM part for Bosch wall ovens and ranges. It secures the oven door safely closed during baking and broiling. As an essential component for safety, the latch allows controlled access to the cooking cavity while preventing accidental openings.

Causes can be wear from constant use, damage from impact, or deterioration of latch parts over time.

Symptoms of a faulty latch include:

• The door popping or swinging open during use
• Difficulty closing or fully engaging the latch mechanism
• Looseness around the door seal compromising heat retention

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Fan is an OEM component specifically designed for Bosch wall ovens and ranges. It serves an integral convection purpose in circulating heated air evenly throughout the oven cavity. 

The fan works behind walls to deliver consistent, professional results. Gentle yet powerful air circulation ensures uniform baking on multiple rack levels simultaneously. 

Symptoms of a failed fan can include: 

• Inability to operate convection bake or roast functions
• Extremes in cooking unevenness between racks and items   
• Abnormal sounds like scraping or grinding emitted from the fan area

Causes of damage may involve debris accumulation on blade obstructions over extended use. Operating failures due to aged or misaligned motor parts are also possibilities.

This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and select Kenmore wall oven models featuring congruous convection systems. Replacement restores multi-level air flow cooking.
 

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Valve is an OEM replacement part for Bosch gas ranges. Responsible operation delivers controlled flames through burners. Consistent cooking depends on precise regulation.

Causes of a bad valve can include wear from constant adjustments opening and closing fuel pathways thousands of times. Exposure to ambient heat and residual grease vapors also accelerates component decline over several years.

Symptoms of a bad valve include:

• Inability to modulate burner output properly for recipes  
• Unstable pilot lights or sudden extinguishing during operation
• Gas buildups resulting in unpredictable combustion tendencies
• Failures illuminating control panels or kitchens with leak warnings

This OEM Bosch part is also compatible with Siemens or Gaggenau models.

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This cable harness routes power and signals between components to restore reliable electrical connections in compatible Bosch appliances. Replacing a damaged harness can stop intermittent operation and restore normal control communication. What it does:

• Carries power and control signals between the control board and appliance components
• Replaces frayed, pinched, or broken wiring that can cause intermittent power or failures
• Helps resolve symptoms such as no power to a circuit, erratic operation, or control errors related to loose or damaged wires
• Provides factory-style connectors for a direct fit where specified by the manufacturer

• One cable harness (wiring harness) as pictured

• Disconnect power to the appliance before beginning any repair
• Match connector shapes and pin counts; route harness along original path and secure with existing clips or fasteners
• Inspect mating connectors and terminals for damage or corrosion before connecting

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fit and prevents rattling or loose parts so the appliance operates quietly and safely. What it does:

• Secures panels, brackets, or components to the appliance frame
• Prevents vibration-related noise and loose-fitting parts
• Replaces missing or damaged screws that can cause misalignment
• Helps maintain safe cabinet and component attachment during operation

• Use the matching screw hole and thread orientation; do not force if fit is not smooth
• Tighten until snug—avoid over-tightening to prevent stripping or damage
• Disconnect power and follow appliance-specific safety procedures before servicing
• Inspect surrounding fasteners and mounts for wear

The Burner is an OEM part for Bosch ranges and cooktops. The burner head features precision engineered ports that allow for the proper mixing of gas and air, ensuring efficient and even combustion.

Causes of a bad gas burner head can include clogging or blockages of the small flame ports, cracks or breaks in the metal head casing from long term heat exposure or accidental damage.

Symptoms of a bad gas burner head include:

• Uneven or irregular flame patterns
• Flames that blow out easily or are difficult to ignite
• Reduced heating power and ineffective cooking
• Gas leaks from cracks or breaks in the head casing

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Door Handle is an OEM part for Bosch wall ovens and ranges. The door handle allows for easy opening, closing, and accessing of the oven cavity.

The oven door handle is responsible for safely grasping the heated door without risk of burns. Its ergonomic design provides a sturdy grip to smoothly manipulate the door back and forth while cooking or cleaning.

Causes of a bad oven door handle can include damage, cracks or loosening from repeated use. Accidental impacts are also possible.

Symptoms of a bad oven door handle include:

• Loose, unstable or detached handle assembly
• Cracks or breaks on handle components
• Difficulty opening and closing the oven door

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement drawer front that restores the appearance and proper fit of your appliance drawer. Installs as the visible face panel to repair dents, scratches, or misalignment and return a clean, finished look. What it does

• Replaces the damaged or dented front panel so the drawer closes and aligns correctly.
• Restores cosmetic appearance by covering scratches, chips, or faded finishes.
• Provides the mounting surface for drawer handle(s) and latch engagement.
• Helps eliminate rattling or uneven gaps caused by a bent or warped front.

• Refer to your appliance service manual for drawer removal steps; disconnect power if required by model before servicing.
• Handle the panel carefully to avoid scratching the finish; use a soft surface when setting it down.
• Align the front with drawer mounting points before tightening fasteners; use a second person for larger or heavier panels.
• Fasteners or trim clips may be required but are not assumed included.

This water inlet valve controls the flow of water into the appliance so cycles fill when needed and stop to prevent overfilling. Replaces a worn or failed inlet valve to restore reliable water fill operation. What it does:

• Opens and closes to allow water into the appliance during fill cycles
• Works with the control board and float/sensors to prevent overfill
• Common repair for no-fill, slow-fill, or continuous-fill symptoms
• Helps stop leaks caused by valves that fail to fully close

• Turn off power and shut off the water supply before starting
• Drain residual water and relieve pressure from the line before disconnecting
• Inspect and replace any worn inlet hoses, clamps, or seals during installation
• Test cycles and check for leaks after installation

The Insert is an OEM part for Bosch ovens. It secures and stabilizes the oven door handle, ensuring proper alignment and smooth operation.

This insert is engineered to withstand the rigors of regular use, providing a stable and reliable connection between the oven door and the handle.  

Causes of a bad mounting insert can include excessive wear and tear, exposure to high temperatures or moisture, or physical impact that may cause deformation or cracking.

Symptoms of a bad insert include:

• Loose or wobbly door handle
• Difficulty in opening or closing the oven door smoothly
• Misalignment of the handle with the door
• Potential damage to the handle or door due to improper support

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.