Bosch Hdi8064u/01 Parts

The Handle End Cap is an OEM part for Bosch ovens. This end cap sits at either end of the range handle and helps complete the handle assembly. It provides an ergonomic gripping surface for easy lifting and lowering of the range door.

Causes of a bad handle end cap can include wear and tear or damage from excessive opening and closing of the range door over time. The end caps take the brunt of this activity and can crack, split or break off.

Symptoms of a bad handle end cap include:

• Exposed or sharp metal edges on the handle where the end cap is missing
• Difficulty opening or closing the range door smoothly due to an imbalanced handle
• Loose or insecure end cap that could potentially detach during use

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This regulator controls and stabilizes the gas pressure delivered to the appliance's burner/valve assembly, helping restore consistent flame performance and reliable heating. A direct-replacement part that returns proper fuel flow when the original regulator fails. What it does:

• Regulates incoming gas pressure to the burner/valve system for steady flame height
• Prevents over- or under-pressurization that can cause weak, uneven, or fluctuating flames
• Helps restore normal burner ignition and consistent cooking or heating performance
• Works as part of the appliance's fuel delivery path to maintain safe operation

• One regulator

• Turn off the gas supply and unplug the appliance before starting any work
• Follow manufacturer instructions and local codes; use proper fittings and thread sealant rated for gas
• Test all connections for leaks after installation using an approved leak detection method

This cable harness routes power and signals between the appliance's control and its electrical components, restoring proper connections for reliable operation. It replaces a damaged or worn wiring harness to help resolve electrical faults and intermittent power. What it does:

• Links control board, motor, sensors and other electrical components so signals and power flow correctly.
• Common symptom: appliance won't power on or displays intermittent operation.
• Common symptom: flickering lights, erratic cycles, or component failures tied to loose or broken wires.
• Helps prevent short circuits caused by frayed wiring when installed as a direct replacement.

• Disconnect power (unplug or shut off circuit breaker) before starting any repair.
• Handle connectors carefully; release locking tabs before pulling to avoid damage.
• Route and secure the harness following OEM clips and channels to prevent chafing or pinching.

This clamp secures flexible hoses and small tubes to fittings, keeping connections tight to help prevent leaks and movement. It's a small replacement clip used on water and drain lines in many appliances. What it does

• Holds a hose or tube firmly to a barb or nipple to maintain a sealed connection
• Helps stop leaks caused by loose or damaged hose connections
• Prevents hoses from slipping off during operation and reduces vibration noise
• Used wherever a small retaining clamp is required on water or drain lines

• One clamp

• Turn off power and shut off water supply before replacing the clamp
• Slide clamp over the hose, push hose fully onto the fitting, then compress or tighten clamp as required
• Use pliers or the correct tool for the clamp type; avoid damaging the hose when installing
• Replace if corroded, cracked, or not seating properly

This dishwasher door seal creates a watertight barrier between the door and tub when the door closes. Replacing a worn gasket helps stop front leaks and restores a tight, reliable seal. What it does:

• Seals the door-to-tub interface to keep wash water contained
• Helps prevent drips or puddles at the front or along the sides
• Replaces cracked, flattened, or deformed gasket material that no longer seals
• Improve door closure if extra force was needed to latch

• One door seal

• Disconnect power and turn off water supply before servicing
• Remove the old seal and thoroughly clean the channel/mating surfaces of residue and debris
• Align and seat the new seal fully without stretching; ensure correct orientation and that ends meet evenly
• Close the door and run a short test cycle to check for leaks

This replacement routing tube channels fluid inside the appliance to restore proper flow and stop leaks. It replaces a damaged, cracked, or clogged tube to help prevent water pooling and restore normal operation. What it does:

• Routes water or condensate between internal components to maintain proper drainage or flow
• Replaces cracked, split, or deteriorated tubing that can cause leaks or puddles
• Helps eliminate intermittent dripping or loss of water flow caused by blockages or holes
• Works as a direct-fit replacement when the original tubing has failed

• One replacement tube

• Disconnect power and shut off the water supply before installing
• Inspect and reuse or replace any retaining clips, clamps, or grommets as needed
• Slide tube fully into fittings and secure with appropriate clamps to prevent leaks

Replacement tube that channels water inside the appliance to restore proper flow and help prevent leaks, pooling, or poor performance when the original is cracked, kinked, or deteriorated for reliable operation. What it does:

• Routes water between internal components to maintain normal circulation.
• Stops properly when replaced if the original is cracked, split, hardened, or leaking.
• Common symptoms indicating replacement: visible leaks, puddling under the appliance, reduced water flow, or inconsistent cycle performance.
• Reinstall with proper clamps and routing to avoid kinks and ensure a watertight connection.

• Disconnect power and shut off the water supply before starting any repair.
• Drain remaining water and relieve pressure in lines to minimize spills.
• Remove access panels as needed and note the tube routing/orientation before removing the old part.
• Install the new tube without sharp bends, secure with the correct clamps or fittings, then restore power/water and check thoroughly for leaks.

This spacer sets the correct gap between mating components so the assembly aligns and operates smoothly. Replacing a worn or missing spacer restores proper fit, helps prevent rubbing, and supports consistent performance. What it does:

• Maintains specified clearance and alignment within the assembly
• Helps prevent metal-to-metal contact that can cause noise or wear
• Supports smooth movement or secure mounting where designed
• Symptoms of a failed spacer can include looseness, misalignment, scraping noises, or uneven movement

• 1 spacer

• Disconnect power (and shut off gas/water if applicable) before servicing
• Access the relevant assembly and note the spacer's orientation/position
• Replace one-for-one; seat fully and avoid overtightening fasteners
• Reassemble and test for proper alignment and smooth operation

This retaining washer secures a control shaft or hub to keep components in place during operation, helping restore proper control movement and prevent parts from sliding off the shaft. Simple replacement when a worn or missing retainer causes loose knobs or shifting parts. What it does:

• Fits onto a control or drive shaft to hold a knob, hub or gear in position
• Prevents axial movement that can cause loose or slipping controls
• Commonly replaced when the original washer is bent, cracked, or lost
• Works with compatible Bosch control assemblies and hubs

• One retaining washer

• Recommended for users comfortable with basic appliance disassembly; unplug appliance before starting
• Remove the control knob or panel per model instructions to access the shaft
• Press the washer into place on the shaft until fully seated; verify proper fit and control operation

This replacement door gasket seals the dishwasher door to keep water inside the tub and help maintain wash performance. It restores a tight door seal to reduce leaks and prevent water from pooling around the appliance. What it does:

• Creates a watertight seal between the door and tub to stop leaks during cycles
• Helps prevent water from dripping onto floors and surrounding cabinetry
• Reduces steam and moisture escape that can cause odors or damage
• Restores proper door closure where worn or flattened seals allow seepage

• Disconnect power and water supply before attempting any service.
• Inspect surrounding door edges for damage and clean mounting surfaces before installing the new gasket.
• Press the gasket firmly into the door channel; some models require partial door disassembly.
• After installation, run a short cycle and check for leaks before returning the dishwasher to regular use.

This insert is a replacement trim panel that restores the appliance's finished appearance and helps protect internal components from debris. It fits into the surrounding assembly to maintain a secure, flush exterior surface. What it does:

• Replaces a cracked, warped, or missing trim panel to improve appearance.
• Helps keep food, dust, and moisture out of internal gaps.
• Reduces rattling or movement when the surrounding panel is loose.
• Restores correct alignment for adjacent trim and controls.

• Disconnect power to the appliance before beginning any repair.
• Remove surrounding panels or door to access the insert; keep fasteners organized.
• Handle edges carefully to avoid cuts or damage to the finish.
• If adhesive, clips, or fasteners are damaged, replace them with exact-match parts for secure fit.

This inner door panel restores the dishwasher's internal door surface and helps protect internal components from water and steam. It keeps the door structure rigid and provides a clean, serviceable interior finish. What it does:

• Forms the inner surface of the dishwasher door, directing water and steam back into the tub
• Protects wiring, insulation, and latch mechanisms housed inside the door
• Helps the door close evenly and engage the latch correctly
• Visible damage, dents, cracks, or corrosion on this panel can cause leaks or alignment issues
• Replacing a damaged inner door panel can stop interior moisture damage and improve door performance

• 1 inner door panel

• Disconnect power to the appliance before servicing to avoid electrical shock
• Expect to remove the outer door panel and any attached trim or hardware to access the inner panel
• Handle edges carefully—sheet metal can be sharp and internal insulation or clips may be present

This heating element is the replaceable component that provides the heat needed for appliance wash/dry cycles, restoring normal water or air temperatures so cycles complete correctly and items dry or sanitize as intended. What it does:

• Heats water or air inside the appliance to support wash, sanitize or dry functions
• Restores normal cycle temperatures when a failed element causes low/no heat
• Can stop overheating by replacing damaged or shorted elements
• Helps resolve symptoms like long cycles, poor drying, or failure to reach set temperatures

• One heating element

• Always disconnect power (unplug or switch off breaker) before servicing
• Access procedures vary by appliance; remove panels or lower access cover as required
• Handle terminals and heater assembly carefully; avoid bending or damaging the element
• Verify wiring connections and test for continuity after installation

A small retaining ring that holds internal components securely in place to prevent shifting during normal use. Replacing this ring restores proper alignment and reduces noise or intermittent contact caused by loose parts. What it does:

• Secures shafts, clips or small assemblies so they stay seated during operation
• Prevents components from shifting, which can cause vibration or rubbing noises
• Keeps mating parts aligned for reliable mechanical function
• Simple, single-purpose part used where a small mechanical hold is needed

• Disconnect power and water before starting any repair
• Handle small parts carefully and keep track of removed components and orientation
• Replace only with the exact part number to ensure proper fit

This hinge holder secures the appliance door hinge assembly to keep the door aligned and operating smoothly. It restores proper door positioning and helps prevent sagging or uneven closing. What it does:

• Supports and anchors the door hinge assembly to the cabinet or frame
• Maintains correct door alignment to ensure even gaps and smooth opening/closing
• Helps prevent door sagging or misalignment that can cause rubbing or poor sealing
• Reduces hinge noise or binding caused by a loose or worn holder

• Disconnect power (and water for dishwashers) before starting any repair
• Remove the door or access panel per the manufacturer instructions for safe installation
• Minimal hand tools typically required; follow torque and alignment guidance in the service manual