Bosch She53tf5uc/22 Parts

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This is a replacement push button set for the control panel. It restores smooth, reliable button action so you can select settings without sticking or broken caps, keeping operation intuitive and the fascia looking clean.

• Replaces worn, cracked, or missing push button caps on the control interface
• Transfers your press to the underlying switch bank for proper function selection
• Helps resolve buttons that stick, wobble, or don't spring back
• Refreshes the appearance of the control panel

• Disconnect power to the appliance before servicing
• Remove or open the control panel to access the button set
• Note the position and orientation of each button; transfer components in the same order
• Before final reassembly, test each button for smooth travel and proper actuation

This facia panel is the exterior trim that covers a dishwasher's control console, restoring the appliance's appearance and protecting the underlying buttons and electronics from moisture and wear. It's a direct-replacement cosmetic and protective panel. What it does:

• Covers and protects the control console and electronic components from spills and moisture.
• Restores a damaged, cracked, or scratched front appearance for a cleaner finish.
• Keeps button and touchpad openings aligned for reliable user access.
• Helps prevent debris buildup behind the control area that can cause malfunctions.

• Disconnect power to the appliance before beginning any repair.
• Remove the outer door or control assembly per the appliance service instructions to access mounting screws or clips.
• Handle edges carefully to avoid scratching the replacement panel and to prevent cuts from metal edges.
• Reuse or replace any mounting screws/clips as needed; do not force panels into place.

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

This power module is the electronic control module that supplies and regulates power to appliance systems, restoring proper control when the original module fails. It helps the appliance respond to commands and run electrical components reliably. What it does:

• Regulates and distributes power to motors, relays, and sensors to enable normal operation
• Interprets control signals and coordinates appliance functions for cycles and safety features
• Common symptom: appliance does not start, loses power intermittently, or shows no display/response
• Replacing a faulty module can resolve power, control, or communication faults caused by module failure

• One power module/control board assembly

• Always disconnect power to the appliance before beginning service to avoid shock or damage
• Handle the module carefully; protect against static discharge and avoid touching circuit traces
• Verify wiring orientation and secure connections; replace any damaged harnesses or fasteners as needed

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is the electronic control module (programmer) that manages dishwasher wash cycles, timing, and user interface logic so the appliance runs the correct program and responds to selected settings. Replaces a failing or unresponsive control board. What it does:

• Receives input from the control panel and sensors to start and sequence wash programs
• Controls valves, pumps, heaters, and cycle timing for proper operation
• Helps resolve symptoms like no power to cycles, unresponsive buttons, or dishwasher that won't start or complete programs
• Restores correct electronic command and timing when the original module is faulty

• Disconnect power and water before beginning any repair
• Handle the module carefully; avoid touching circuit traces and use anti-static precautions if available
• Verify connector locations and harness orientation before removing the old module; take photos for reference

This push button set replaces worn, cracked, or non-responsive control buttons so you can reliably select cycles and options. The buttons restore tactile feedback and proper engagement with the control assembly. What it does:

• Replaces damaged, stuck, or broken control buttons that won't depress or return
• Restores tactile feedback so button presses reliably register at the control
• Helps resolve symptoms like buttons that don't engage, are missing, or look damaged
• Works as the user-interface buttons used to select cycles and options

• One push button set

• Disconnect power at the breaker or unplug the appliance before starting
• Installation typically requires removing the control panel or trim; small screws and clips may be present
• Handle plastic buttons carefully to avoid scratching or breaking during installation
• Test button function before reassembling the appliance completely