Bosch Shp65cm2n Parts

A replacement door hinge that restores smooth, stable door movement and proper alignment. Designed to replace the factory hinge so the appliance door opens, closes and stays aligned as intended. What it does:

• Supports and pivots the appliance door for normal opening and closing.
• Keeps the door aligned to prevent rubbing, gaps, or uneven sealing.
• Helps eliminate sagging or misaligned doors that make closing difficult.
• Works with original mounting points to maintain correct door motion.

• Use basic hand tools; for model-specific instructions.
• Disconnect power and/or gas and empty the appliance as required before servicing.
• Handle glass or insulated doors with care—use an assistant for heavy or awkward doors.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This outer door panel restores the dishwasher's front appearance and protects internal door components from damage and moisture. It provides a clean finish and supports mounting for trim and hardware when in good condition. What it does:

• Covers and protects the inner door assembly from water, dirt and everyday wear.
• Provides the finished exterior surface and attachment point for the handle/trim hardware.
• Helps maintain proper door alignment and sealing when not dented or warped.
• Common symptoms: visible dents, scratches, rust or a damaged exterior that affects appearance or function.

• Disconnect power to the appliance before beginning any work.
• Remove the inner door trim and retain all fasteners; some components may need to be transferred to the new panel.
• Handle the panel carefully — it can be awkward and may have sharp edges.
• If seals, insulation, or trim are damaged, replace or re-seat them during reassembly; test the door for proper fit and operation after installation.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This replacement outer door restores the finished exterior of the appliance door, protecting inner components and bringing back a clean, secure fit when the original is damaged or missing. It's also known as the outer door panel/skin. What it does

• Provides the exterior surface of the door and mounting points for trim or handle (model dependent)
• Shields the inner door assembly from impacts and wear
• Helps maintain proper door alignment and smooth operation
• Common symptoms: dents, cracks, broken tabs, loose or rattling door panel

• One outer door

• Disconnect power before servicing; wear cut-resistant gloves
• Open the door and support the panel while removing perimeter fasteners
• Transfer any reusable hardware, trim, or insulation from the old panel as needed
• Reinstall fasteners without overtightening and verify door alignment and operation

This facia panel is the finished front cover that restores the dishwasher's appearance and protects the control area. Replacing a cracked or damaged facia returns a clean, finished look and helps shield internal components from debris. What it does:

• Provides the finished front surface and cosmetic cover for the dishwasher door/control area.
• Protects controls, wiring and connectors behind the door from moisture and debris.
• Replaces cracked, dented or heavily scratched facia that detracts from the appliance's appearance.
• Helps maintain proper alignment of trim and covers that sit at the front of the door.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Removal typically requires opening the door and removing screws or clips from the inner door panel; follow the model-specific service instructions.
• Handle clips and mounting tabs carefully to avoid breakage; reuse existing hardware if undamaged.

This replacement control panel button restores a worn, broken or missing push button so your appliance's controls can be operated easily and reliably. It matches the original shape and snap-fit for a clean finish. What it does

• Acts as the user interface button on the appliance control panel for selecting cycles or features
• Replaces cracked, stripped, loose or missing buttons that won't depress or return properly
• Helps restore tactile feedback and proper button travel for responsive control input
• Prevents debris and moisture from entering the switch area when installed correctly

• Replacement control panel button (single)

• Power off and disconnect the appliance before attempting any repair
• Typically installs by snapping into the control panel; access may require removal of the front panel or control console
• Avoid forcing the part; align tabs and press evenly until it clicks into place
• If the underlying switch or actuator is damaged, replace both components to ensure proper function

This facia panel is the front trim piece that covers and protects the appliance's control area, restoring the original appearance and providing a finished surface for buttons and displays. What it does

• Covers and protects the control area from spills, dirt, and everyday wear
• Restores a clean, undamaged front appearance when the original panel is cracked, scratched, or faded
• Helps keep control buttons and display trim aligned and securely mounted
• Prevents loose or hanging trim that can catch on clothing or interfere with door operation

• Disconnect power to the appliance before beginning any work
• Removal of the door trim or control bezel may be required — keep all screws and small parts organized
• Align mounting tabs carefully during installation to avoid cracking the new panel
• Handle assemblies gently and avoid forcing connectors

This push button is a direct-replacement control panel button that restores a worn, cracked, or unresponsive selector on the appliance. It gives a like-new tactile feel so you can reliably select cycles and options. What it does:

• Replaces a broken, cracked, or non-responsive control panel button
• Restores tactile feedback and reliable user input on the control/display panel
• Helps stop buttons from sticking or failing to engage the switch beneath
• Fits into the existing button bezel and interfaces with the original switch mechanism

• Disconnect power (unplug or shut off circuit breaker) before beginning any work
• Remove the control panel trim or bezel to access and gently snap the old button out from the front
• Press the new button into place until it seats; verify proper engagement with the switch underneath

This support is a replacement mounting bracket that secures internal components and helps maintain proper alignment. It restores stability and reliable operation after damage or wear to the original support. What it does:

• Provides structural support for internal assemblies to prevent sagging or misalignment
• Helps keep parts positioned correctly to reduce rubbing, noise, or binding
• Restores proper fit after a cracked or bent support causes operational issues
• Compatible with the appliance's factory mounting points for a direct-fit replacement

• Install with the appliance powered off and disconnected from the mains
• Use correct fasteners and torque to avoid stress or deformation of the support
• Inspect nearby components for damage and replace as needed while access is available