Bosch Shxm4ay55n/01 Parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This push button set replaces worn or broken control-panel buttons so you can restore button function and appearance on the appliance. Simple, direct replacement for damaged or stuck push-style control buttons. What it does:

• Replaces damaged, cracked, or missing push-style control buttons
• Restores tactile response for panel controls that feel stuck or unresponsive
• Improves appearance of a faded or worn control surface
• Helps recover normal user input when original buttons no longer actuate properly

• One push button set

• Disconnect power to the appliance before starting any repair
• Remove the control panel trim or access panel to reach the button assembly
• Replace buttons carefully; avoid pulling on wiring or the control board
• Reassemble panels and test button operation before finishing

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

The Handle is an OEM part for Bosch dishwashers. It provides the surface for securely grasping and maneuvering the dishwasher door during opening and closing. 

Causes of a bad handle can include wear and tear from ongoing grasping motions. Repeated lifting and adjusting of the door places stress on handle components over time.

Symptoms of a bad handle include:

• Looseness, wobbling or detachment from the door assembly
• Sharp edges, cracks or splits compromising a firm grip
• Reduced ability to precisely guide the door into position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This replacement cup rack secures cups and small glassware on the dishwasher's upper rack, keeping items upright and preventing shifting during the wash for more consistent cleaning results. What it does:

• Provides dedicated support for cups, mugs and small glasses on the upper rack
• Helps prevent tipping, sliding and breakage during wash cycles
• Restores missing, cracked or warped cup-holding sections
• Compatible with dishwasher upper rack mounting points and clips

• One cup rack assembly

• Remove the upper rack for easier access; refer to your dishwasher manual for rack removal steps
• Align and snap the rack into the designated upper-rack mounting points; some models may use retaining clips or small fasteners
• Handle edges and clips carefully to avoid damage; wear gloves if needed

This support is a replacement mounting bracket that helps secure and stabilize internal appliance components for proper alignment and operation. Replacing a worn or broken support restores fit and reduces movement-related noise or malfunctions. What it does

• Holds internal components or assemblies in their correct position to prevent shifting during operation
• Restores proper alignment that can affect door fit, drawer travel, or rotating parts
• Reduces vibration and rattling caused by a loose or damaged support
• Suitable when the original support is cracked, bent, or missing

• One support as shown

• Disconnect power and, if applicable, water supply before beginning any repair
• Remove surrounding panels or assemblies as needed to access the support; keep fasteners for reassembly
• Inspect adjacent clips, screws, and mounting points; replace any damaged hardware

This replacement hood canopy restores the exterior cover of the range hood to protect internal components and maintain proper ventilation performance and appearance. It's a direct-fit exterior panel that replaces damaged or dented hoods. What it does:

• Covers and protects internal fan, light, and wiring from grease and debris
• Channels exhaust airflow through the hood body to the vent system
• Restores proper fit and finish when the original hood is bent, dented, or corroded
• Helps reduce visible gaps and rattling caused by a damaged outer panel

• Disconnect power to the appliance before starting any work to avoid electrical shock
• Wear gloves and eye protection to guard against sharp edges and debris
• Removal/installation may require basic hand tools and a second person to support the panel
• Follow the appliance manufacturer's service instructions for proper alignment and fastening