C-45P Parts

This carriage bolt is a genuine MTD part, sold individually. This carriage bolt can be used as a replacement part in lawnmowers, snowblowers, tillers, and edgers. The purpose of the carriage bolt for one of these outdoor appliances is to work in conjunction with a nut to affix two metal components to one another or one metal component to another wood component.The carriage bolt in an outdoor appliance might have to be completely replaced if it cannot affix two or more components together. This could occur if the carriage bolt has been punctured, dented, cracked, warped, or eroded to the point that it loses its functionality. If this occurs, the carriage bolt should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This carriage bolt is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard-Man, and MasterCut.

This hex screw is a genuine MTD part. It is a replacement part for lawn tractors, edgers, lawn mowers, snow blowers, tillers, string trimmers, chainsaws, log splitters, and wood chippers. It is a standard-sized part and it may be compatible with other machines as well.This particular screw is a one-inch metal screw and may be found in various places on the pieces of equipment. Refer to a parts diagram to find out where it is used on the equipment.This hex screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Most machines have multiple screws; check others to see if more need replacement. It is compatible with several makes, including but not limited to Bolens, MTD, Troy-Bilt, Yard-Man, Yard Machines, Ryobi, Husky, Cub Cadet, Montgomery Ward, MasterCut, Turf King, and more.

This is a genuine replacement flywheel spacer that is used on select outdoor lawn and garden engines. The flywheel spacer is used to connect the flywheel in line trimmers and provide adequate spacing so that the line can rotate properly to provide the trimming required. This spacer is made of durable metal but it can be damaged or become worn over time. If it is not functioning properly, the part will need to be replaced so that the unit is safe to use. This part can provide an exact fit for compatible models. This genuine OEM flywheel spacer is manufactured by MTD. It can be used in units from the brand, as well as compatible units from Troy-Bilt, Cub Cadet, and Craftsman. The spacer is made of durable metal and sold individually. Other parts will require an additional purchase. The line trimmer should be disconnected from power and the spark plug should be disconnected before doing any repairs. Wear gloves for hand protection whenever working on internal components on line trimmers and other outdoor power equipment.

This part is a replacement gearbox assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken gearbox assembly in various models of tillers.The gearbox assembly is essential to the tiller's functionality as it is what rotates the tine shaft in order to spin the tines themselves. If the current gearbox is worn, malfunctioning, or otherwise broken, it will need to be replaced immediately. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this gearbox assembly, the appropriate owner's manual and equipment diagrams should be referred to. This gearbox assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This genuine MTD replacement part is a crankcase cover O-ring for use with trimmers, blowers, tillers, edgers, string trimmers, and cultivators. A properly functioning O-ring is essential for the safe and reliable use of the equipment. The crankcase houses the crankshaft, and the O-ring is used to ensure a seal on the case. A damaged or worn out O-ring may cause oil to leak, leading to unsafe operation. The O-ring may become worn out or damaged with extended use, necessitating replacement. Remember to check the O-ring periodically to spot any wear or damage. This part is an identical replacement for an O-ring that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, and more trimmers, blowers, tillers, edgers, string trimmers, and cultivators.

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This fuel tank support is a genuine MTD part, sold individually. A fuel tank support can be used as a replacement part for outdoor appliances including tillers, string trimmers, leaf blowers, and edgers. This genuine OEM part is made out of high quality, durable materials that are specifically designed to last and hold up to possible general wear and tear over long-term usage.The fuel tank support might be subject to various forms of damage that can reduce or negate the efficacy of its function. If this occurs, the fuel tank support should be removed and replaced by this genuine OEM replacement part in order to guarantee safe continued usage of the appliance over its typical lifespan.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This fuel tank support is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Machines.

This part is a replacement lead wire kit. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective lead wire in line trimmers.Lead wires are critical for the line trimmer to work as they connect the electrical system required to power the equipment. Wires can become stripped, broken, stretched, or otherwise defective over time and thus will require replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Take caution when working with electrical wiring. For more accurate information on how and where to install these lead wires, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. These lead wires can be used with different models of line trimmers that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands. Part sold individually.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

This tine assembly is a genuine MTD part, sold individually. This tine assembly can be used as a replacement part in a tiller or a string trimmer. The purpose of the tine assembly in a tiller or a string trimmer is to provide the appliance with the proper blades to cut through and loosen soil in order to keep the lawn of the operator healthy.The tine assembly in a tiller or a string trimmer might need to be replaced at some point within the standard lifespan of the outdoor appliance. This could occur if the tine assembly has been punctured, warped, dented, cracked, or eroded to the point that the tines are no longer as functional as they once were. If this is the case, the tine assembly should be removed and replaced by this genuine OEM replacement part before using the tiller or the string trimmer again.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This tine assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Man.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

This flywheel is an authentic OEM replacement part sourced directly from the manufacturer. It is part of the starter assembly on trimmers and other small engines that use a pull-start system. If the engine is misfiring, overheating, or not starting, the flywheel should be checked and replaced if necessary. Normal wear and tear can lead to the breakdown of the flywheel. The flywheel is located behind the recoil starter assembly and is attached to the engine. When the starter cord is pulled, the flywheel spins to start the engine. If the flywheel is damaged and doesn't spin fully or is seized and won't spin at all, it should be replaced. A Phillips screwdriver, spark plug wrench, Torx wrench, long-nosed pliers, and a rubber hammer are needed to complete this project. A bowl or other receptacle for storing drained fuel and work gloves are also suggested. Make sure the engine is cool, and the spark plug is removed before making this repair.This flywheel is a solid metal part that is sold individually. This flywheel is designed for tillers, cultivators, and other small engines manufactured by Craftsman and Troy-Bilt.