C2s950p3md1 Parts

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The LP Conversion Kit is an OEM part compatible with GE gas ranges. It allows the range to safely operate on liquid propane gas rather than natural gas. The conversion kit includes all necessary components to switch fuel types, such as LP orifices and installation instructions. 

Causes of needing conversion include changing your home’s gas service from natural to liquid propane or installing the range in a location only supplied by LP tanks.

Symptoms of an improper or missing conversion can be:

• Yellow flame tips during cooking  
• Incomplete combustion of LP gases
• Decreased heat levels or uneven cooking 
• Potential gas leaks or hazardous situations

This GE LP kit is compatible with Hotpoint, RCA, and select Kenmore models too.

This stainless-steel finish surface burner control knob replaces a worn, cracked, or missing knob so you can reliably turn burners on/off and set heat levels again while keeping a factory look.

• Attaches to the burner valve stem to control on/off and heat output
• Replaces knobs that are cracked, stripped, loose, melted, or missing
• Restores smooth rotation and clear alignment with setting marks
• Stainless finish matches the original appearance

• Turn all controls to OFF and allow the surface to cool
• Pull the old knob straight off the valve shaft; do not pry on the stem
• Align the flat side/D-shape of the shaft and press the new knob on until fully seated
• Verify proper operation through all settings

This pressure regulator controls and stabilizes the incoming gas supply to your range/oven's manifold, delivering steady burner flames and consistent oven heat. Replace a failed regulator to correct weak flames, surging, or erratic heating performance.

• Regulates incoming gas line pressure to the appliance manifold for proper operation
• Helps address symptoms such as low heat, yellow/orange flames, surging/lifting flames, or burners that won't stay lit
• Supports consistent oven temperatures by maintaining stable fuel pressure
• Typically located where the gas supply enters the rear of the range

• Shut off gas supply and disconnect electrical power before servicing
• Orient the regulator's flow arrow toward the appliance/manifold
• Use a gas-rated thread sealant on tapered pipe threads; do not overtighten
• After installation, leak-test all connections with an approved solution—never with an open flame

Glass & touch board assembly restores the appliance's front control surface by combining the glass panel with the touch-sensitive control board. Replaces cracked glass or unresponsive touch controls for a clean, functional control interface. What it does:

• Provides the touch-sensitive interface that sends user commands to the oven/range control electronics.
• Replaces cracked, chipped, or cosmetic-damaged glass on the control panel.
• Can resolve unresponsive, intermittent, or erratic touch input caused by a damaged front panel or failed touch board.
• Restores a finished appearance and consistent touch response when the original panel is worn or broken.

• Disconnect power to the appliance before attempting any service to avoid electric shock.
• Handle glass carefully to avoid cuts; support the assembly during removal and installation.
• May require transferring mounting brackets or wiring harnesses from the old part; ensure all connectors are fully seated and secured.

Replacement front frame bumper that cushions and supports the appliance's front frame or door trim, helping reduce vibration and prevent metal-on-metal contact—restoring a secure, quiet fit for the door or trim assembly. What it does:

• Cushions the front frame/door trim to prevent wear, chipping, and metal rubbing.
• Helps align and stabilize the door/frame for proper closing and fit.
• Reduces rattling and vibration noise during operation.
• Commonly replaced when the door feels loose, rubs against the cabinet, or makes noise.

• Disconnect power to the appliance before beginning any repair.
• May require removal of the door trim or front panel—use basic hand tools and keep fasteners organized.
• Seat the bumper fully in its mounting location; avoid forcing or deforming the part.

The Central Grate is an OEM part for GE gas ranges. This central grate sits directly above the burner in the center of the range, providing an additional cooking surface. With a flat and smooth surface, it supports various sizes and types of cooking pots and pans over the middle burner.

Causes of a bad central grate can include general wear and tear over time. The continuous exposure to high heat can slowly degrade steel fasteners and welds. Accidental impacts from cookware being placed on the grate can also damage it.

Symptoms of a bad central grate include:

• Warping or sagging of the grate plate from high heat
• Cracks or broken welds from years of use
• Loose fasteners or mounting points that cause instability
• Large scratches or pits that trap food debris

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grate Asm is an OEM component specifically designed for GE gas ranges. This grate sits over the cooktop burners as well as the mounting hardware to securely install them. It distributes heat evenly while protecting the burners from spills, burns or other potential damage from cookware. 

Symptoms of a bad grate assembly include:

• Grates that are warped, cracked, or discolored from heat 
• Loose, wobbly, or improperly positioned grates over burners
• Missing hardware or components that prevent the secure mounting of the grates
• Inability to move cookware smoothly across the surfaces

Causes of failure can include breaks or cracks formed from heavy pots/pans, deterioration of mounting hardware over years of use, or damage incurred during cleaning.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

This PSC convection motor powers the oven's convection fan to circulate hot air for even cooking and browning. Replacing a worn motor restores proper airflow and helps return convection performance. What it does:

• Drives the oven's convection fan to move and circulate heated air throughout the oven cavity.
• Helps maintain even cooking and consistent browning by promoting uniform temperature distribution.
• Common symptom: convection fan won't run or runs intermittently during convection cycles.
• Common symptom: oven has poor air circulation or uneven cooking when using convection mode.

• One convection motor (PSC) as shown.

• Disconnect power to the appliance before starting any work.
• Handle sheet metal edges carefully; use basic hand tools and reference the oven's service manual for disassembly steps.
• Verify electrical connector and mounting alignment match the original before final installation.

This spark igniter module routes high-voltage sparks to a gas range's burners so they light reliably. Replacing a worn or failed module restores consistent ignition and stops continuous clicking or no-spark conditions at the cooktop. What it does:

• Produces timed spark pulses to ignite gas at the burner valves
• Directs spark to individual burner igniters when burner control is turned on
• Helps stop symptoms like constant clicking, no ignition, or intermittent spark
• Works as the control interface between the range's user controls and the igniters

• Disconnect power and shut off gas supply before servicing
• Handle the module and wiring gently to avoid damage to terminals and connectors
• Verify the part number on the old module matches this replacement before installing

This orifice spud meters gas to a burner, controlling flow for a correct, stable flame. Replace a clogged or damaged spud to restore reliable ignition and proper flame characteristics.

• Threads into the orifice holder to regulate gas flow to the burner head
• Helps maintain proper flame height and shape during cooking
• A clogged or damaged spud can cause weak/uneven flames, yellow tipping, or delayed ignition
• Replacing the spud can improve lighting and flame consistency

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove grates, caps, and burner heads (as applicable) to access the orifice
• Support the orifice holder while loosening/tightening the spud to avoid twisting the gas tube
• After reassembly, restore gas and check for leaks with an approved leak-detection solution; verify proper burner operation

Size: 8 - 32 inch.