Cae25ehq2 Parts

This blower wheel moves air through the dryer cabinet so clothes dry efficiently and the appliance vents properly. Replacing a worn or damaged wheel restores airflow and helps prevent overheating and long dry times. What it does:

• Spins on the blower motor shaft to draw air across the heating element and through the drum
• Restores proper airflow when a chipped or bent wheel causes reduced drying performance
• Reduces rattling or vibration caused by imbalanced or cracked fins
• Helps prevent overheating and extended cycle times due to restricted airflow

• One blower wheel

• Disconnect power (and gas if applicable) before servicing to avoid electric shock or injury
• May require removal of the dryer front or blower housing and loosening the motor to slide the wheel onto the shaft
• Ensure the wheel is oriented and seated correctly on the motor shaft and that set screws or clips are tightened as required
• Inspect motor shaft and housing for debris; spin the new wheel by hand to ensure free rotation before reassembly

This start/run capacitor helps provide the extra electrical push motors need to start and run smoothly, restoring reliable operation to the motor circuit and reducing hard-start symptoms. What it does:

• Provides temporary stored electrical energy to help the motor start and maintain stable operation
• Commonly used in motor circuits for compressors, fans or drive motors depending on application
• Resolves symptoms such as humming, motors that won't start, slow or intermittent motor operation
• Supports consistent motor torque and can improve overall system reliability when failed capacitors cause performance loss

• Disconnect power to the appliance before servicing to avoid shock hazard
• Capacitors can hold a charge; discharge safely
• Verify terminal layout and mounting match the old part before installation

This replacement wire provides a single insulated conductor used to reconnect or repair electrical connections inside the appliance, restoring reliable signal or power flow to the affected component. What it does

• Re-establishes an electrical connection between components when an original wire is damaged or disconnected
• Helps resolve symptoms such as intermittent operation, no power to a circuit, or a loose connection in the appliance
• Prevents arcing and poor contact when a worn or frayed wire is replaced
• Used as a direct inline conductor where the OEM wiring is faulty

• One replacement insulated wire

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Match wire routing and terminal orientation to the original; secure with existing clips or ties to prevent chafing
• Ensure proper connector seating and no exposed conductor is left exposed after installation
• If multiple wires or a full harness are damaged, replace the entire harness per manufacturer guidance

This refrigerator door handle provides a stable grip for opening and closing the door and restores the door's original appearance and function. Designed as a direct-fit replacement where this OEM-style handle is specified. What it does

• Replaces a damaged, cracked, or loose refrigerator door handle to restore safe, reliable opening and closing.
• Provides a secure grip and proper alignment for the door during normal use.
• Helps prevent further wear to the door edge and surrounding trim by restoring correct handle function.
• Compatible with factory handle mounting points when the OEM part number matches.

• One refrigerator door handle

• Installation typically requires removing the old handle screws or clips and securing the replacement in the same mounting locations.
• Use appropriate hand tools; avoid overtightening fasteners which can crack the handle or strip threads.
• Keep the door supported during removal/installation to avoid hinge or door damage.
• Turn off power to any nearby components (ice maker lights, etc.) before working.

This scroll is the replaceable spiral element used inside a refrigeration compressor to compress refrigerant and restore proper cooling performance. It's the OEM-design component that engages with the mating scroll to form the compression chambers. What it does:

• Forms the moving or stationary spiral surface in a scroll-type compressor to compress refrigerant
• Restores internal compression when the factory scroll is damaged or worn
• Can help resolve symptoms such as loss of cooling, excessive compressor noise, or failed compression when diagnosis confirms scroll damage
• Works only as part of a compatible scroll compressor assembly; not a standalone drop-in pump solution

• Replacement requires compressor disassembly and reassembly
• Follow OEM torque, alignment, and sealant procedures; improper installation can cause compressor failure
• Observe all safety precautions for handling pressurized refrigerant and electrical components

This replacement power cord restores electrical supply to your appliance so it can run safely and reliably. Designed to match the original cord's fit and function for straightforward replacement. What it does:

• Provides the main AC connection to restore power when the cord is damaged or fails
• Replaces cords with cracked insulation, exposed wiring, or loose connections
• Helps stop intermittent power, arcing, or loss of power caused by a faulty cord
• Matches original wiring configuration for proper fit and connection

• Turn off power at the breaker and unplug the appliance before servicing.
• Use proper tools and secure all wire terminals; avoid pinching or crushing the cord.

This evaporator coil assembly circulates refrigerant and absorbs heat inside the freezer compartment to enable proper cooling. Replacing a failed evaporator restores the sealed-system heat-exchange surface the appliance needs to maintain low temperatures. What it does

• Absorbs heat from the freezer compartment so refrigerant can carry it away
• Enables frost/defrost cycle to prevent excessive ice buildup when working properly
• Common symptoms indicating failure: excessive frost or ice on the evaporator, poor or uneven cooling, or warm freezer compartment
• Works as part of the sealed refrigeration system alongside the compressor, condenser and expansion device

• Disconnect power to the appliance before starting any repair.
• Defrost and remove ice buildup as needed to access the evaporator; follow OEM service instructions.
• Handle carefully to avoid bending fins or cutting yourself on sharp edges; wear gloves and eye protection.

This mounting strap secures internal components and wiring inside the appliance, helping prevent movement and vibration that can cause noise or wear. It's a simple replacement to restore proper component retention and quiet operation. What it does:

• Fastens and stabilizes wires, hoses or small assemblies to the cabinet or frame
• Helps prevent chafing, rubbing or vibration-related noise from loose parts
• Stops minor movement that can lead to connector strain or intermittent electrical contact
• Useful when original strap is cracked, stretched, or broken

• One mounting/retainer strap

• Disconnect power to the appliance before beginning any work
• Verify strap orientation and attachment points match the original before fastening
• Use the original screws/clips or manufacturer-recommended hardware; do not overtighten
• If routing wires or hoses, ensure no pinch points and secure so lines are not under tension