Cdt835 Parts

This wiring harness assembly connects the appliance's DC control and related components, restoring proper electrical connections for control and power signals. Use it to replace a damaged or faulty harness to help recover normal operation. What it does:

• Provides the factory-style wiring connections between the DC control and associated components
• Restores reliable power and signal paths to prevent intermittent operation
• Helps resolve symptoms such as no power to controlled circuits, erratic control behavior, or electrical faults
• Maintains correct routing and connector fit for OEM compatibility

• Disconnect power to the appliance before beginning any work.
• Compare the replacement harness to the original to ensure connector locations and routing.
• Route and secure the harness away from heat sources and moving parts; avoid pinched wires.

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This coated upper FDT assembly is a direct replacement for the appliance's upper FDT structure, restoring worn or damaged upper components for reliable operation. It helps maintain alignment and reduces wear-related issues. What it does:

• Replaces the appliance's upper FDT assembly to restore proper fit and support.
• Provides the coated surface that helps protect mating parts from wear and abrasion.
• Helps correct symptoms such as rubbing or scraping noises, misalignment of the upper housing, and visible wear or damage.
• Restores the intended clearance and contact surfaces for smoother operation.

• One coated upper FDT assembly.

• Disconnect power to the appliance before starting any repair.
• Handle the coated surfaces with care to avoid scratching or damaging the finish.
• Retain and reuse existing mounting hardware unless replacement hardware is explicitly required.

This upper rack fold-down tine assembly replaces worn or rusted tines on your dishwasher's top rack. It restores secure, adjustable support so cups, bowls, and small items stay upright and protected during the wash.

• Provides adjustable rows of coated tines on the upper rack to hold items in place
• Folds flat to make room for larger dishes when needed
• Helps prevent tipping, chipping, and poor cleaning from items falling over
• Common signs: broken or missing tines, peeling coating and rust, items not staying upright on the upper rack

• Disconnect power to the dishwasher before servicing
• Pull the upper rack forward; release end stops to remove the rack if needed
• Unclip and remove the old fold-down tine assembly; align and snap the new assembly onto the rack wires in the same position
• Verify the tines fold and lock properly before running a cycle

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This console top control is the electronic control panel that operates oven and cooktop functions, providing user input, display readouts, and mode selection for safe, accurate cooking and timer control. What it does:

• Registers button presses and touch inputs to start, stop, or change oven/cooktop cycles
• Displays clock, temperature, timer, and error codes for troubleshooting
• Manages oven bake/broil and timed cooking sequences when communicating with the range control board
• Common symptom when failing: unresponsive buttons, blank or erratic display, or inability to select oven functions

• One console top control assembly

• Disconnect power to the appliance before starting to avoid shock or injury
• Handle the control and display lens carefully to avoid scratching or damaging the keypad
• Installation typically requires removing the console trim and disconnecting/reconnecting the wire harness; keep track of mounting screws
• After installation, restore power and test all functions; if problems persist, verify connections and complementary control boards

This adapter conduit routes and protects appliance wiring where the harness transitions between components. It helps keep wires organized and prevents chafing or pinching that can cause electrical faults. What it does

• Guides and shields wiring between appliance components to reduce wear
• Keeps wire routing secure to prevent loose or pinched connections
• Helps maintain reliable electrical continuity by protecting wire insulation
• Can prevent intermittent power or control issues caused by damaged wiring

• One adapter conduit

• Disconnect power (unplug or shut off breaker) before inspecting or replacing wiring components
• Handle wiring gently and avoid sharp bends; route conduit to match original path
• Use existing mounting points and hardware; secure conduit so it cannot rub on edges
• If wiring shows damage, replace or repair the harness per manufacturer instructions.

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

A replacement rack cover handle for the dishwasher upper rack that restores a secure grip and smooth rack operation. Replaces a cracked, broken or missing handle so you can load and unload dishes more easily. What it does

• Attaches to the front of the upper rack to provide a handle for pulling the rack in and out.
• Restores proper alignment and prevents the rack cover from snagging when loading dishes.
• Replaces a handle that is cracked, loose, or broken and reduces the risk of cuts from sharp plastic edges.
• Helps maintain normal rack movement and prevents accidental rack drops.

• One rack cover handle.

• Disconnect power to the dishwasher before servicing to avoid electrical hazard.
• Empty the rack and remove any clips or stops as needed to access the handle mounting points.
• Requires basic hand tools (screwdriver or nut driver) to remove and install fasteners; keep track of any small clips or screws.
• Test rack movement after installation and do not overtighten fasteners to avoid cracking the replacement part.