Cgp9536slss Parts

This control knob seal fits around the control shaft opening on your range or cooktop to close the gap under the knob. It helps block spills and debris from entering the control area and keeps the console looking clean and finished.

• Forms a barrier between the knob/valve shaft and the control surface
• Helps prevent liquids, crumbs, and grease from seeping into the control cavity
• Restores a tidy appearance; replaces cracked, shrunken, or missing seals
• Typical signs of wear: visible damage, gaps around the knob, or residue appearing beneath the panel after spills

• Disconnect power and, if applicable, shut off gas; allow the appliance to cool
• Pull the knob straight off the shaft and remove the old seal
• Clean the area; seat the new seal flat around the shaft—avoid side pressure on the valve stem
• Reinstall the knob and verify smooth operation and proper seal seating

This economic nut is a small replacement fastening nut that restores secure connections for appliance components. It replaces worn or missing hardware so panels and internal parts stay firmly seated and reduce vibration. What it does:

• Secures components and panels by threading onto the matching stud or bolt to hold assemblies in place
• Prevents loose or rattling panels and hardware caused by a missing or damaged nut
• Restores proper fit for user-accessible panels and internal brackets where this nut is specified
• Simple hardware replacement to regain stable mechanical connections

• Disconnect power and water (if applicable) and follow basic electrical safety before servicing the appliance
• Use the matching size wrench or socket; thread-on by hand first to avoid cross-threading, then snug—do not overtighten
• Inspect mating stud or bolt for damage; replace hardware that is stripped, corroded, or deformed

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LED board powers and controls the appliance's LED illumination and indicators to ensure clear, stable visibility. When it fails, LEDs may be dim, flicker, show missing segments, or stay completely dark.

• Regulates power to LED circuits for consistent brightness and operation
• Drives indicator/display LEDs based on signals from the main control
• Helps communicate appliance status and settings to the user
• Common symptoms: dim or flickering LEDs, missing segments, intermittent lighting, or no illumination

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the PCB by the edges and observe anti-static precautions
• Note connector locations; transfer any mounting brackets or hardware from the original board
• After reassembly, restore power and verify LED operation

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

This black cooktop grate replaces a damaged or missing grate to restore stable, even support for cookware on gas ranges. It helps prevent wobbling and keeps pots and pans properly positioned over burners for consistent cooking. What it does:

• Provides a stable surface to support cookware over the burner
• Restores proper burner-to-pot alignment for even heating
• Replaces cracked, warped or missing grates that cause wobbling
• Helps protect the cooktop surface from direct contact with cookware

• Allow the cooktop to be fully cool and gas to be off before handling
• This grate installs by setting it into position—no special tools required
• Clean with mild detergent and soft cloth; avoid harsh abrasives that can damage finish
• If burners do not align after installation, remove and reseat the grate to ensure proper fit

The Light Lens is an OEM replacement part for GE gas cooktops. It is a small yet important part that covers and protects the indicator light bulb in your cooktop so that the light bulb remains protected from grease, spills, and other potential hazards. 

Symptoms of a faulty light lens include:

• Dim or inadequate lighting in the cooking area
• Difficulty in seeing or monitoring your cooking
• Exposure of the light bulb to grease or spills

A bad light lens can occur due to accidental damage or wear and tear over time. If you notice cracks, discoloration, or any other signs of damage on the lens, it may be time to replace the old or damaged light lens with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Bridge Bumper is an OEM part for GE electric cooktops. It is a protective bumper located at the bridge that connects the front control panel area to the cooking surface. The bumper acts as a safeguard, cushioning any potential impact to the underside of the control panel. 

Causes of a bad bridge bumper include normal wear and tear, exposure to heat or moisture during cooking, or tears from impact. 

Symptoms of a bad bridge bumper include:

• Visible damage or deterioration of the bumper material  
• Exposure of raw edges that were previously covered
• Increased risk of scratches or damage to the control panel surface

This GE replacement part is also compatible with some Hotpoint, General Electric, and Kenmore electric cooktop models. Protect your appliance with this genuine OEM bridge bumper to safeguard the control panel from accidental impact.
 

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Selector Knob Asm Ss is an OEM part for GE gas cooktops. This stainless steel knob assembly controls the burner and oven functions like bake, broil and temperature. 

Causes of a bad selector knob assembly can include wear and tear from frequent use and heat exposure over time. Normal daily cooking operations can put stress on the internal components and knob materials.

Symptoms of a bad assembly include:

• Difficulty switching burner settings or oven modes
• Loose, unstable or wobbly knob 
• Inaccurate temperature or function selection
• Faded markings on the knob face

This GE part is also compatible with Hotpoint, RCA, and some Kenmore gas ranges. 

The Orifice Spud NG is an OEM replacement part for GE gas cooktops. It is responsible for metering the flow of natural gas into each burner pipe, controlling the air and gas mixture for proper flame combustion.

Causes for a bad orifice spud can include wear from contaminants over time, cracks or blockages altering gas flow, or damage from mishandling. 

Symptoms of a bad spud include:

• Yellow or unstable burner flames  
• Improper heating of pots and pans
• Decreased gas pressure or cooktop output
• Gas leaks or excessive clicking from the gas valve

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models as well.

This dual gas valve controls gas flow to two oven/range burners from a center-mounted connection, restoring safe fuel delivery for heating cycles. Designed to replace a failed valve assembly and stop intermittent heating or no-heat symptoms. What it does

• Opens and closes gas flow to the oven/range burner circuits when signaled by the thermostat or control.
• Replaces a worn or stuck valve that can cause no heat, uneven heating, or continuous pilot flow.
• Helps stop clicking or cycling caused by faulty valve operation.
• Works with the appliance's safety interlocks and thermocouples to regulate oven/burner ignition.

• One dual center gas valve assembly as specified by the manufacturer.

• Turn off gas supply and disconnect electrical power before starting service.
• After installation, check all gas connections with a leak detector solution and verify proper operation per manufacturer instructions.
• Do not install a visibly damaged valve; replace if packaging or components are compromised.

The Orifice Spud Natural Gas is an OEM part for GE gas cooktops. It is responsible for regulating gas flow to each burner of the cooktop.

The orifice spud contains precision machined openings to control the amount of natural gas delivered according to each burner's requirements. Properly sized orifices are vital for efficient combustion and optimal heat levels during cooking. 

Causes of a faulty orifice spud can include wear and tear over time, corrosion buildup affecting gas flow, or damage to the spud's openings.

Symptoms of a problematic orifice spud include:

• Burners not igniting consistently 
• Unstable flame patterns with inconsistent heating
• Abnormal burner noises
• Inability to adjust burner flames 

Replacing with this genuine OEM GE part restores optimized gas flow control to the cooktop burners. Compatible models include GE, Hotpoint, KitchenAid, and select Kenmore gas cooktop ranges.
 

This LED board housing (white) secures and shields the LED light board within your appliance's lighting or control assembly, keeping the board properly aligned and protected for reliable illumination and a clean, finished appearance.

• Positions the LED board correctly so light is directed where intended
• Protects the board from movement and incidental contact
• Helps maintain a snug, rattle-free fit of the surrounding trim/assembly
• Typical failure signs: cracked or missing housing, a loose LED board, uneven or intermittent illumination around the lit area

• Disconnect power at the breaker before servicing.
• Access the LED/light assembly per your model's service or parts diagram.
• Transfer the existing LED board (and any clips) into the new housing; secure with original fasteners.
• Reassemble, restore power, and test the light before final closure.

This housing film is a thin protective barrier that installs on an appliance housing to help shield nearby components from grease, moisture, and abrasion. Replacing a damaged or missing film helps maintain proper protection and a clean, secure fit.

• Provides a protective layer between the housing and internal components
• Helps limit moisture, grease, and debris intrusion
• Can restore correct spacing where the film serves as an insulator/shim
• Replace if the original is torn, warped, peeling, or missing

• Disconnect power at the breaker or unplug the appliance before servicing
• Note the orientation of the original film and match it during installation
• Handle by the edges; avoid creasing or contaminating the surface
• Ensure the film lays flat and fully seated before reassembly