Cgub2642cp3 Parts

This ignition module mounting bracket secures and positions the stove/oven spark ignition module for reliable spark alignment. Replacing a damaged or bent bracket restores proper module placement to help resumes normal ignition. What it does:

• Secures the ignition/spark module to the appliance chassis so the electrode aligns with the burner.
• Keeps the module stable to prevent intermittent or no-spark conditions caused by a loose or misaligned module.
• Helps maintain correct wire routing and strain relief to reduce connector or wiring stress.
• Can prevent rubbing or contact that may cause intermittent clicking or failure to ignite.

• One ignition module mounting bracket.

• Disconnect electrical power and shut off gas supply before beginning service.
• Handle the ignition module and electrode carefully to avoid damage; support the module while removing/installing the bracket.
• Retain and reuse original screws or fasteners unless replacements are specified by the manufacturer.

This handle grommet cushions and secures a range or oven door handle, preventing vibration and wear while keeping the handle snug. It's a small replaceable part that restores proper fit and reduces rattling. What it does

• Provides a soft mounting surface between the handle and door to prevent metal-to-metal contact
• Keeps the handle tight and aligned to stop looseness or movement
• Dampens vibration and reduces rattling during operation
• Helps protect the door finish where the handle mounts

• One handle grommet

• High-level push-fit part; remove the handle or access the mounting area per your model's service instructions
• Disconnect power to the appliance before beginning service when accessing electrical or heated components
• Use a plastic trim tool or small screwdriver to pry out the old grommet carefully to avoid scratching the door
• If the handle or mounting hardware is damaged, inspect and replace as needed for a lasting repair

This replacement badge is the small logo emblem that mounts to the appliance exterior to restore original appearance and branding. It provides a clean, professional look when the original emblem is missing, faded, or damaged. What it does:

• Replaces a missing, cracked, or faded exterior logo emblem
• Restores factory appearance on doors, panels, or control bezels
• Helps identify the appliance and maintain resale value
• Cosmetic-only part; does not affect appliance operation

• Surface-mount installation; may use adhesive or snap-fit depending on model—inspect original attachment method before installing
• Clean and dry mounting surface thoroughly for best adhesion
• Handle carefully to avoid scratching finished surfaces

This spud orifice is the gas flow jet that meters fuel to a griddle burner, restoring proper flame size and heat for cooking. It's a direct-replacement consumable used in gas griddle assemblies. What it does:

• Precisely meters gas to the griddle burner so the flame burns correctly for even heating
• Helps resolve weak, uneven, or absent griddle flames when the orifice is clogged or damaged
• Reduces improper combustion symptoms such as sputtering or inconsistent heat output
• Works as a replacement component in burner/griddle fuel delivery systems

• One spud orifice for griddle burner

• Turn off the gas supply and power to the appliance before beginning work
• Replace only with the matching orifice for your appliance;
• Use basic hand tools; avoid forcing fittings to prevent damage to the burner or manifold

This conversion kit adapts a compatible natural-gas range or oven for reliable burner performance at higher elevations. It supplies the required orifices and parts to help maintain proper flame characteristics and safer operation above factory-specified altitudes. What it does:

• Replaces orifice(s) and related components to increase gas flow control for high-altitude use
• Helps restore consistent burner ignition and steady flames when operating above factory altitude limits
• Reduces symptoms such as weak or uneven flames, poor simmering, or difficulty maintaining burner heat
• Intended only for natural-gas appliances being relocated or used at higher elevations

• Follow local codes; installation typically requires shutting off gas and disconnecting power
• Only experienced installers should perform the conversion
• Retain OEM instructions included with the kit
• Do not modify kit components beyond OEM instructions; incorrect installation can cause unsafe operation

This pan unit is the oven's bottom tray that catches drips and shields the oven cavity and lower components from spills and debris. It helps keep the oven interior cleaner and preserves heating elements from direct contact with food residues. What it does:

• Collects spills, crumbs and grease that fall during cooking or baking
• Protects the oven floor, heating elements and internal components from corrosion and damage
• Reduces smoke and burning odors caused by food debris contacting hot surfaces
• Restores proper support and alignment for lower oven racks and components when the original pan is warped or damaged

• One pan unit

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove oven racks and any insulation or covers to access the pan; handle sharp edges carefully
• Verify correct orientation and seating so the pan does not interfere with heating elements or door operation
• If the pan was damaged by overheating or corrosion, inspect surrounding parts and replace as needed

This knob assembly replaces a damaged or missing range/cooktop control knob so you can select heat levels and operate the control smoothly. It restores a secure grip and reliable engagement with the control shaft. What it does:

• Replaces a cracked, stripped, or missing control knob to restore user control
• Engages the control shaft to select heat or function settings
• Helps stop slipping or loose rotation caused by worn knobs
• Matches OEM fit and mounting style for direct replacement where specified

• Disconnect power to the appliance before attempting any service
• Pull off the old knob by hand; align splines on the new knob with the control shaft and push on firmly
• If the old knob is stuck, use a gentle pulling tool and avoid damaging the control shaft
• Test the knob operation after restoration; replace the switch or control as needed