Cpr 1100Adw Parts

This spacer maintains the correct gap between mating components inside your appliance, keeping parts aligned and operating smoothly. Replacing a worn or missing spacer restores proper fit and helps prevent rubbing, noise, and premature wear. What it does:

• Sets and preserves the correct stand-off between components for proper alignment
• Helps ensure smooth operation and consistent control feel
• Reduces friction and contact that can cause noise or wear
• Common failure signs: loose or wobbly parts, rubbing/scraping sounds, misalignment, poor fit

• 1 spacer

• Disconnect power and, if applicable, shut off gas supply before servicing.
• Note the orientation of the original spacer and match it during reassembly.
• Handle nearby trim and control components carefully to avoid damage.
• After reassembly, verify smooth operation and proper clearances before restoring power/gas.

This spacer secures and maintains proper spacing between adjacent appliance components to prevent rubbing and misalignment, helping restore smooth, stable operation after wear or replacement. What it does:

• Positions and cushions parts to prevent metal-on-metal contact and reduce noise or vibration
• Keeps components aligned for proper fit and function after panel or assembly reinstallation
• Helps maintain clearance for moving parts to avoid abrasion and premature wear
• Useful when replacing worn fasteners, clips, or assemblies that rely on precise spacing

• Disconnect power (unplug or switch off circuit breaker) before beginning any repair
• Handle small parts carefully and retain any associated fasteners; compare new part to old for orientation
• Use basic hand tools as required; avoid forcing parts into place to prevent damage

This is a replacement refrigerator door hinge that restores proper door alignment and smooth opening. It helps stop sagging, rubbing, and uneven sealing so the door closes correctly and the appliance maintains temperature. What it does:

• Supports and pivots the refrigerator door for smooth opening and closing
• Restores correct door alignment to prevent gaps and uneven seals
• Stops door sag, rubbing, or binding that can cause unusual wear or noise
• Helps maintain proper door contact to preserve internal temperature

• One door hinge

• Disconnect power (and water supply if applicable) before starting repairs
• Support the door while removing and installing the hinge to prevent damage or injury
• Use basic hand tools; follow manufacturer instructions for torque and alignment

This is a replacement thermostat mounting screw that secures the temperature control sensor for reliable positioning and consistent temperature sensing. A simple, low-cost fix when the existing screw is missing, stripped, or damaged. What it does:

• Secures the thermostat or temperature sensor to the appliance housing or bracket
• Keeps the thermostat sensor in correct contact/position for accurate temperature readings
• Prevents the sensor from shifting, which can cause temperature fluctuations or inconsistent operation
• Replaces stripped, corroded, or missing mounting hardware

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Use the correct screwdriver and match thread engagement; do not force or cross-thread the screw
• Tighten snugly but avoid overtightening to prevent damage to the thermostat or housing
• After installation, restore power and verify proper temperature control and operation

This caster is the wheel assembly that lets your appliance roll and sit securely. Replacing a worn or damaged caster restores smooth movement and helps the appliance sit level for safer use. What it does:

• Replaces a failed wheel assembly so the appliance can be moved without scraping or sticking
• Supports appliance weight at one corner and helps maintain proper leveling
• Reduces rocking, uneven contact, and wheel-related noise when moving the unit
• Prevents damage to flooring and cabinet edges caused by a broken or missing caster

• Unplug the appliance and empty contents or secure heavy shelves before starting
• Support the appliance with a block or jack; do not rely on the caster or tilt it unsafely
• Remove the old caster fastener(s) and install the replacement using the same mounting method
• Check and adjust leveling after installation; replace additional casters if others are worn

Color: Black

A set of four valve mounting screws used to secure the water/ice valve or valve bracket in place. These OEM-style screws restore proper valve alignment and fasten valve assemblies for reliable operation. What it does:

• Secures the valve or valve bracket to the appliance chassis to prevent movement during operation
• Helps maintain a tight seal at valve mounting points to reduce risk of leaks
• Replaces missing, stripped, or corroded valve mounting fasteners
• Restores stable valve positioning that can prevent rattling or vibration

• Disconnect power and shut off the water supply before beginning any work
• Use the correct screwdriver or bit to avoid stripping the screw heads
• Thread screws in by hand first, then tighten snugly—do not overtighten to avoid damaging the valve or mounting threads
• If existing threads are damaged, inspect the mounting boss and replace as needed

This LP gas hood orifice controls propane flow to a range/hood burner for stable, efficient flame performance. It's a direct-replacement service part used when a burner is delivering low, uneven, or overly large flames. What it does

• Meter propane flow to the hood/top burner for correct combustion.
• Restores proper flame size and heat output when the orifice is clogged or wrong for LP conversion.
• Helps stop symptoms like sputtering, weak flames, or uneven burner performance.
• Small, threaded part that seats in the burner or valve assembly to create the correct jet size.

• Turn off gas supply and power before servicing; follow local codes for gas appliance work.
• Inspect threads and sealing surfaces; use proper thread sealant if required by manufacturer.
• Only replace with the correct orifice size for your fuel type (LP); do not mix with natural gas orifices.

This exhaust hose (also called a vent hose) routes hot discharge air from the unit to the window vent so the room can cool properly. Replacing a cracked or collapsed hose restores correct airflow and prevents hot air recirculation.

• Vents warm air from the appliance to the outside through the window kit
• Maintains proper airflow for normal operation
• Common signs of failure: visible cracks or tears, air leaks, hose won't stay attached, persistent kinks, reduced venting or poor cooling performance

• Unplug the unit and allow it to cool before service
• Transfer existing end adapters/couplers to the new hose as required and seat fully on both connections
• Route the hose as short and straight as possible; avoid sharp bends or crushing
• After installation, run the unit and check for secure connections and air leaks

This drain plug seals the appliance drain port to prevent leaks and keep drainage pathways closed when service or parts are removed. It restores a watertight seal and helps prevent unwanted water loss or spills. What it does:

• Seals the drain outlet to stop dripping or leaking from the drain port
• Helps contain water during component removal or service
• Prevents debris from entering the drain opening
• Useful when replacing or servicing drain hoses or drain assemblies

• Disconnect power and turn off water supply before servicing
• Remove any panels or access covers as required to reach the drain port
• Push the plug firmly into the drain opening until fully seated; do not force with excessive tools
• Inspect surrounding gasket/surfaces for damage and replace if worn to ensure a proper seal

This replacement remote control restores full control of microwave front-panel functions from a distance, making it easy to start, stop and adjust cook settings without touching the appliance. Simple swap to regain convenient remote operation. What it does:

• Sends commands to the microwave to start/stop cooking and select basic functions
• Allows selection of cook time and power level from the remote
• Helps when on-unit controls are hard to reach or the original remote is lost or unresponsive
• Resolves symptoms such as unresponsive remote buttons, intermittent remote control operation, or no remote control function

• Install or replace batteries as required by your model before use
• Point remote at the microwave receiver and press a button to confirm operation; replace batteries if response is weak
• Handle the remote carefully; avoid exposing it to moisture or impact

This increaser is a small hose adapter that lets you join mismatched appliance hoses or vent tubing for a snug, leak-resistant connection. It helps restore proper flow and prevents loose or leaking hose connections. What it does:

• Adapts one hose or vent diameter to a larger size for a secure fit
• Restores proper airflow or water flow when hose sizes don't match
• Helps stop leaks and reduces vibration at a mismatched connection
• Useful for dryer, washer, or appliance exhaust/drain hose repairs

• Turn off and unplug the appliance and shut off water/gas as applicable before installing
• Use appropriate clamps or fasteners and tighten evenly to prevent leaks
• Inspect the connection and run a short cycle to check for leaks or loose fit