Ctd-365-N Parts

This gasket seals the oven's convection fan assembly. By closing the gap between the fan cover and the oven cavity, it helps prevent air leaks and supports proper airflow for more even convection cooking and steadier temperatures. What it does:

• Seals the junction between the convection fan cover/housing and the oven liner
• Helps maintain correct airflow during convection operation
• Supports more consistent oven temperatures and even baking
• Replace if the seal is torn, frayed, compressed, or missing

• 1 convection fan gasket

• Disconnect power and allow the oven to cool completely before servicing
• Access by removing the interior convection fan cover; note gasket orientation
• Clean mating surfaces before installing; seat gasket evenly and reassemble
• Use care around sharp edges; wear cut-resistant gloves and eye protection

This replacement screw fastens panels, brackets, or trim inside your appliance. Swapping in a new screw restores a tight, secure fit and helps stop rattles, looseness, or misalignment caused by missing or damaged hardware.

• Secures panels, brackets, or trim to the appliance chassis
• Helps maintain proper alignment and spacing of components
• Replaces missing, rusted, or stripped hardware
• Helps resolve loose panels/handles, vibration, or rattling noises

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location; start threads by hand to avoid cross-threading
• Use the appropriate driver and tighten snugly without overtightening
• Inspect the mounting hole or clip for damage and address as needed before reassembly

This replacement mounting screw is used in cooking appliances to fasten components securely. It restores a tight, rattle-free fit so panels, brackets, or burner-related parts stay properly aligned during everyday use.

• Secures appliance components to the chassis or assembly
• Replaces a missing, stripped, or corroded screw
• Helps resolve loose panels, wobbling parts, or vibration noises
• Supports proper alignment of mounted parts

• Disconnect power at the breaker; for gas units, also shut off gas supply
• Allow the appliance to cool completely before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Tighten snugly without overtightening; replace damaged threads or hardware as needed

This halogen bulb uses a G9 two-pin base to light the oven cavity, making it easy to monitor food without opening the door. Replace a burned-out or flickering bulb to restore clear interior visibility while cooking.

• Provides illumination inside the oven so you can see through the window during preheat, baking, and broiling
• Plugs into a G9 bi-pin socket in the light assembly
• Common symptoms: no light, flickering or intermittent light, dim light, or a blackened/broken capsule

• Disconnect power at the breaker or unplug the appliance before servicing
• Allow the oven and bulb to cool completely
• Remove the light lens/cover; pull the old bulb straight out of the G9 socket; press the new bulb fully into place; reinstall the cover
• Avoid touching the glass with bare fingers—use gloves or a clean cloth

A left-side oven rack guide that supports and aligns the oven rack so it slides smoothly and stays in position. Replacing a worn or broken guide restores stable rack movement and helps prevent the rack from catching or falling. What it does:

• Supports the oven rack on the left side and keeps the rack seated in the track.
• Guides the rack as it slides in and out to reduce binding and uneven movement.
• Common symptom: rack sags, tilts, or falls off the track when pulled.
• Common symptom: rack binds, scrapes, or does not slide smoothly.

• One left oven rack guide.

• Disconnect power to the oven and allow it to cool before starting any service.
• Remove oven racks and any obstructions before replacing the guide.
• Replacement is typically a direct swap; keep hardware and fasteners with the unit if they are reused.

This is the oven's convection fan blade. It mounts to the convection motor shaft and circulates hot air throughout the cavity for more even baking and roasting.

• Draws heated air across the food and redistributes it for uniform temperatures
• Helps reduce hot and cold spots in convection mode
• Worn or damaged blades can cause poor convection performance or unusual noise
• Visible cracks, warping, or looseness are common replacement indicators

• Disconnect power to the appliance before servicing
• Allow the oven to cool completely; remove rear panel or interior cover to access the fan
• Note blade orientation; install onto the motor shaft and secure per manufacturer design
• The blade spins freely with no rubbing before restoring power

Replace a worn or broken right-side oven rack guide to restore smooth rack movement and stable support when sliding cookware in and out of the oven. Helps keep the rack aligned and prevents binding or falling. What it does:

• Supports the right side of the oven rack so it slides in and out smoothly
• Prevents the rack from tipping or falling when loaded
• Fixes symptoms like a sagging or sticking rack and uneven rack alignment
• Durable replacement for plastic or metal guides worn from normal use

• One right-side oven rack guide

• Disconnect power to the appliance (and shut off gas if applicable) before starting
• Remove oven racks and any insulation or trim that blocks access to the guide
• Typically secures with clips or screws; retain hardware and reinstall securely

The Jet Holder is an OEM part for Fisher & Paykel gas ranges. It holds the jet orifices responsible for gas combustion.

The jet holder positions the jets exactly where needed for consistent burner flames, resulting in dependable heating performance. Its calibrated orifices control gas intensity and distribution across each burner.

Causes for jet holder issues include warping or damage after extended heating and cooling cycles. Residues may also accumulate and disrupt gas flow.

Symptoms of a problematic jet holder involve:

• Unpredictable or irregular burner flame patterns
• Hot and cold spots on cooktop that affect results
• Excessive noise or flames that appear too high/low
• Difficulty achieving consistent temperatures for recipes

The Spark Module is an OEM part for Fisher & Paykel gas ranges. It is a part of the burner ignition system.

Located near the control valves, the spark module generates the spark needed to light burner flames. Its electronic components produce intermittent sparks in timed intervals to reliably ignite gas released from burners.

Causes of a faulty spark module can include damage due to moisture exposure or breakdown over repeated sparking cycles. Power surges have potential to degrade electronics as well.

Symptoms of a malfunctioning spark module include:

• Burners failing to light or staying unlit
• Delayed or inconsistent ignition of burner flames
• Constant sparking noise but no flame initiation

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

The JET HOLDER D, DMS #47 is an OEM part for Fisher & Paykel gas ranges and cooktops. It securely holds the jet orifice that meters gas flow to one of the rear burners.

Causes generally involve wear and environmental degradation over extended use. Mineral buildup or cracks in the plastic material interfere with precise flow control.

Symptoms of a problematic jet holder can include:

• Unstable or irregularly sized rear burner flames
• Burner response abnormal when adjusting heat settings
• Inability to achieve expected flame sizes on one rear burner
• Potential gas leaks at the jet holder connection point

This rack oven slide assembly replaces a worn or damaged oven rack slide to restore smooth rack movement and secure support for oven racks. It helps racks slide in and out without sticking or sagging for safer loading and unloading. What it does:

• Supports and guides the oven rack along the oven cavity for smooth in/out motion
• Replaces bent, worn, or broken slides that cause rack sticking or uneven movement
• Helps maintain proper rack alignment so cookware stays level during use
• Reduces rattling or clunking noises caused by damaged slide hardware

• Disconnect power (and gas if applicable) before starting any repair; allow the appliance to cool.
• Use appropriate hand tools; keep track of mounting hardware and orientation during removal.
• Align the slide with existing mounting points; secure fasteners snugly but avoid over-tightening.
• Test rack movement before completing reassembly; re-check alignment and fasteners if movement is still restricted.

This gas valve switch is the replacement control used on compatible gas ranges and ovens to enable safe ignition and burner operation. Replacing a faulty switch restores normal spark/ignition sequencing and reliable burner control. What it does:

• Sends the control signal that activates the gas valve during ignition cycles
• Works with the oven/range ignition system to allow burners to light and stay lit
• Commonly replaced when burners fail to ignite, ignition cycles don't start, or the control does not respond
• Matches OEM part GH-400-002-B2 for a direct-fit replacement on listed appliances

• Turn off electrical power and gas supply before starting work
• Handle with care to avoid damage to terminals and connectors

The Simmer Gas Jet Holder Nut is an OEM part for Fisher & Paykel gas ranges. It serves an important purpose in the simmer burner assembly by securely fastening the jet holder block in place.

The nut holds the simmer gas jet holder block precisely over its mounting brackets, thereby positioning the jets for low-flame simmering functionality. Proper positioning supports controlled combustion for delicate simmering performance.

Please note this is just the small nut component and does not include the full jet holder block.

Symptoms of a loose or faulty nut can include:

• Fluctuating or unstable simmer burner flames
• Difficulty achieving or maintaining a low simmer setting
• Carbon buildup near the simmer burner area
• Odors or discoloration from incomplete combustion

A replacement black trim screw that secures exterior trim and small panels on appliances, restoring proper fit and finish so pieces stay aligned and rattle-free. What it does

• Fastens appliance trim, bezels, and small decorative panels
• Keeps trim aligned to prevent gaps, rattling, and vibration noise
• Replaces missing or stripped trim fasteners to restore secure attachment
• Works wherever the OEM specifies a black trim screw of this style

• One black trim screw

• Disconnect power or unplug the appliance before starting any work
• Use the correct screwdriver size to avoid stripping the screw head
• Hand-start the screw, then snug—do not overtighten to prevent cracking the trim
• If access is tight, a magnetic screwdriver or bit holder can help

This user interface selector knob replaces a worn, cracked, or missing control knob on the appliance control panel to restore reliable setting selection and tactile feedback. It's a direct-fit exterior control for the range/oven control panel. What it does:

• Rotates to select heat, timer, or function settings from the appliance control board.
• Restores a secure grip and clear position feedback when original knob is loose, stripped, or broken.
• Prevents accidental setting changes by providing a firm detent and stable interface.
• Matches original fit and operation for smooth, repeatable control input.

• One control panel user interface selector knob (single knob)

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Usually installs by pulling off the old knob and pushing the replacement onto the control shaft; use a gentle, straight pull/push.
• If knob does not seat or turns freely, inspect the control shaft for damage—do not force the knob.