Cye22tshhgss Parts

This tube clamp secures flexible water tubing to its fitting in refrigerators. It helps maintain a tight seal to prevent leaks and keeps lines from slipping off under normal operating pressure.

• Holds plastic or rubber tubing firmly on a barbed fitting or nipple
• Helps prevent drips and leaks at tube connection points
• Addresses loose or disconnected water lines
• Useful when tubing slips off or won't stay seated

• Disconnect power and shut off the water supply before servicing
• Position the clamp over the tube and fitting; compress with pliers and release to lock in place
• Ensure the clamp is centered and fully seated; tug-test the tube
• Restore water and power; check all connections for leaks

A stainless-steel handle fastener that secures the refrigerator door handle to the door assembly for a solid, wobble-free grip. Use to restore a loose, stripped, or missing handle attachment point. What it does:

• Secures the door handle to the door/handle mounting point so the handle stays tight and aligned.
• Stops handle movement, wobbling, or rattling caused by a worn or missing fastener.
• Replaces a corroded or damaged fastener to restore a secure connection.
• Stainless finish resists corrosion at the handle mounting point.

• Disconnect power to the appliance before starting work whenever access to internal parts is required.
• Use the correct screwdriver or bit; turn carefully and avoid sideways force on the handle.
• Do not overtighten—over-torquing can strip threads or crack surrounding trim.
• Keep removed hardware and any trim pieces for reassembly; inspect handle and threaded inserts for damage.

This hinge cap is the small trim piece that covers your refrigerator door hinge. Replacing a cracked or missing cap protects the hinge from dust and restores a clean, finished look to the door area.

• Covers and protects the door hinge hardware from dust and debris
• Restores a clean, factory-finished appearance
• Helps keep the hinge area clear for smooth door movement
• Replace when the original cap is cracked, loose, discolored, or missing

• Disconnect power before servicing the appliance
• Support the door to prevent movement while working near the hinge
• Remove the old cap; align and press the new cap onto the hinge until fully seated; reuse the original fastener if your model uses one
• Verify the cap is secure and does not rub as the door opens/closes

This Pex water line is the flexible inlet tubing that carries water to the refrigerator's dispenser and ice maker. It replaces worn or damaged tubing to restore reliable water flow and prevent leaks. What it does:

• Transfers water from the household supply to the refrigerator water valve, dispenser and ice maker
• Replaces cracked, pinholed or hardened tubing that can cause leaks
• Helps restore normal water flow when the dispenser or ice maker isn't filling
• Provides a flexible, corrosion-resistant connection for routine service or repair

• Turn off the refrigerator and shut off the home water supply before starting
• Drain any residual water from the line and relieve system pressure before disconnecting fittings
• Inspect and, if needed, replace any clamps, ferrules or valves shown in your service instructions; tighten fittings to OEM torque recommendations

This hinge center assembly replaces the refrigerator's right-side hinge pivot to restore proper door alignment and smooth opening. It helps reduce door sag and improves sealing for better performance. What it does:

• Provides the central pivot point for the right refrigerator door hinge
• Restores correct door alignment and even closing when the door is sagging or crooked
• Reduces rubbing, binding, or grinding noises from the hinge area
• Helps maintain an effective door seal to prevent cold air loss

• One hinge center assembly (right side)

• Unplug the appliance and empty or support the door before starting work
• Support or brace the door while removing hinge fasteners to prevent dropping
• Reuse existing screws/bolts unless new hardware is specified by the manufacturer

This right-hand hinge top pin assembly supports and lets a refrigerator or freezer door pivot smoothly, restoring proper alignment and door operation. Use it to correct sagging, misaligned doors, or noisy pivoting. What it does:

• Provides the pivot point for the door's top hinge to enable smooth opening and closing.
• Restores proper door alignment to fix uneven gaps or doors that rub or stick.
• Helps eliminate grinding or squeaking noises from a worn or damaged hinge area.
• Supports the door weight to prevent further sagging or seal damage.

• Unplug the appliance or switch off power before servicing to reduce shock risk.
• Support the door when removing hinge fasteners to prevent dropping or damage.
• Use basic hand tools; follow OEM procedure for loosening/tightening hinge hardware and torque if specified by manufacturer.

This grill recess is a molded trim piece that restores the recessed area at the front lower grille of the refrigerator, helping the grille sit flush and improving appearance. It replaces damaged or missing trim for a clean, finished look. What it does:

• Provides the recessed mounting/trim area that the lower grille fits into
• Secures and stabilizes the grille so it sits flush with the cabinet face
• Covers rough or damaged cabinet edges for a finished appearance
• Reduces rattling or movement caused by a loose or broken trim piece

• Disconnect power to the appliance before starting any repair
• Typically installs by aligning and snapping or fastening into existing mounting points
• Use basic hand tools as needed; avoid forcing the plastic to prevent breakage
• Replace damaged clips or fasteners to ensure a secure fit

This door case wiring harness connects the refrigerator door components to the main cabinet harness, restoring reliable power and signal routing for lights, dispensers, and sensors. Replaces a damaged or frayed harness to help resolve intermittent or non-working door functions. What it does:

• Transfers power and control signals between the door and cabinet wiring
• Restores operation for door-mounted lights, dispensers, and sensors affected by broken wiring
• Prevents shorts or intermittent failures caused by frayed or pinched wires
• Matches OEM routing and connector locations for a direct-replacement fit

• One door case wiring harness

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle connectors gently and route wiring per cabinet clips to avoid pinching
• Verify connector orientation and seating; secure any retained clips or screws

The Pcb Asm Humidity Board is an OEM part for GE refrigerators. This humidity control board regulates the humidity levels within the refrigerator's crispers or drawers. It allows you to adjust and maintain the ideal humidity level for different types of produce, extending their shelf life and preserving their quality.

Symptoms of a bad humidity control board include:

• Inconsistent humidity levels
• Excessive moisture buildup
• Rapid spoilage of produce

A bad humidity control board can occur due to electrical issues, component failure, or other factors. If you notice symptoms such as inconsistent humidity levels, excessive moisture buildup, or produce spoiling quickly, it may be time to replace the humidity control board.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This tri-water valve assembly controls and directs water flow to a washer's fill and rinse functions, restoring proper water distribution for normal fill cycles. Replace a faulty valve to address inconsistent or missing water delivery. What it does:

• Directs water to multiple fill paths as directed by the washer's control
• Helps ensure the washer fills to the correct levels for each cycle
• Common symptoms: washer won't fill, fills slowly, fills only one cycle, or runs continuously
• Works as the main inlet valve assembly that opens/closes water flow when commanded

• Disconnect power and shut off the water supply before beginning any work
• Relieve water pressure and have towels ready for residual water when disconnecting hoses
• Replace with the identical OEM valve assembly and secure all hose connections and electrical connectors
• After installation, restore power/water, run a test cycle, and check carefully for leaks

This right-side lower freezer drawer slide allows the freezer drawer to open and close smoothly and keeps the drawer aligned. Replaces a worn or damaged slide to restore stable drawer operation and prevent sticking or sagging. What it does:

• Guides and supports the lower freezer drawer for smooth in-and-out movement
• Replaces a broken, bent or worn right-side slide that causes the drawer to bind or drop
• Restores proper alignment so the drawer seals and closes evenly
• Works with the factory mounting points for a direct replacement

• Disconnect power to the appliance before removing drawers or service panels
• Remove the freezer drawer to access slide mounting screws; keep track of hardware
• Use appropriate hand tools; avoid forcing components to prevent damage

This display cover is the clear outer lens that protects and reveals the refrigerator control panel so buttons and indicators stay visible and damage-free. It restores a finished appearance and keeps the controls readable. What it does:

• Protects the control board and display from spills, dust, and everyday wear
• Keeps touchpads, LEDs and indicator icons visible and readable
• Helps maintain a clean, factory appearance on the console
• Can prevent dirt from entering gaps that cause sticky or unresponsive buttons

• For most installs remove power to the appliance before starting (unplug or switch off breaker)
• Typically installs by snapping or fastening into the console; handle gently to avoid cracking
• Keep screws and clips from the old cover for reuse if matching; replace damaged clips
• If the underlying display or electronics are damaged, replace or inspect those parts separately

This power cord harness routes mains power from the wall to the appliance, restoring a secure electrical connection for reliable operation. It replaces a damaged or worn inlet harness to help eliminate power loss and poor contact. What it does:

• Carries incoming AC power from the appliance inlet to internal wiring and control components
• Replaces frayed, melted, or broken cord connections that can cause loss of power
• Can resolve symptoms like the appliance not powering on, intermittent power, or tripping a breaker
• Restores a firm, strain-relieved connection at the power inlet to reduce arcing and overheating risk

• Disconnect power at the breaker or unplug the appliance before beginning any work
• Installation requires basic hand tools and access to the appliance's rear or service panel
• Inspect mating connectors and strain reliefs; replace if damaged
• If you see burn marks, melted insulation, or exposed conductors, replace the harness and verify inlet integrity

Size: 8 - 18 ab.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion