Cye22up2mbs1 Parts

This hinge center assembly replaces the refrigerator's right-side hinge pivot to restore proper door alignment and smooth opening. It helps reduce door sag and improves sealing for better performance. What it does:

• Provides the central pivot point for the right refrigerator door hinge
• Restores correct door alignment and even closing when the door is sagging or crooked
• Reduces rubbing, binding, or grinding noises from the hinge area
• Helps maintain an effective door seal to prevent cold air loss

• One hinge center assembly (right side)

• Unplug the appliance and empty or support the door before starting work
• Support or brace the door while removing hinge fasteners to prevent dropping
• Reuse existing screws/bolts unless new hardware is specified by the manufacturer

This trough drain directs defrost water from the evaporator to the refrigerator drain system, helping prevent water buildup and puddling inside the freezer compartment. It's a direct-fit replacement for the damaged or cracked drain trough. What it does:

• Channels defrost and condensation water away from the evaporator area to the main drain
• Prevents ice buildup and water pooling that can lead to floor or compartment leaks
• Restores proper drain flow when original trough is cracked, warped, or clogged
• Works with the refrigerator's defrost cycle to keep the compartment dry

• One trough drain piece

• Disconnect power to the appliance before starting any work
• Remove stored food and secure shelving or trim that blocks access to the evaporator area
• Inspect and clear the drain path and drain tube while installing the new trough

This screw set replaces worn or missing fasteners used on the freezer door assembly to restore secure attachment of door components. Ideal for fixing loose panels and reducing rattling so the door sits and seals properly. What it does:

• Secures freezer door components and trim to the door assembly.
• Restores proper fit and alignment when screws are corroded, stripped, or missing.
• Helps eliminate door rattles and loose panels that can affect door seating.
• Matches OEM fastener type and lengths used on the freezer door assembly.

• Screw set for freezer door

• Disconnect power and empty the door area before starting work.
• Use the correct screwdriver or bit to avoid stripping heads; install screws until snug—do not overtighten.
• Keep removed parts in order and follow OEM instructions for reassembly.

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This E-clip is a small metal retaining ring that secures shafts, pins, and other round components in appliance assemblies, helping keep moving parts properly seated and preventing unwanted disassembly. What it does:

• Clips onto a shaft or pin to hold components in place and maintain alignment
• Prevents parts from sliding off during operation, reducing noise and wear
• Common symptom: loose or rattling components where a retaining clip is missing or damaged
• Common symptom: assembly falling apart or not engaging correctly due to a failed clip

• One E-clip

• Small part — use needle-nose pliers or snap-ring pliers to install and keep fingers clear
• Disconnect power and/or water to the appliance before servicing to avoid injury
• Wear safety glasses to protect against the clip snapping during installation

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

This is a replacement bottom divider basket. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a cracked or defective divider basket in a variety of different refrigerator models. This divider basket is intended for the bottom drawer of the refrigerator.This divider slots into the center of the bottom refrigerator basket. It can be used to divide the basket drawer into two sides to keep food separated and organized. Over time and with regular use, the divider can become broken or cracked and will require replacing. For safety purposes, always ensure the refrigerator is completely disconnected from its power source before starting any repair work. No special tools are needed to install this part; simply slot the divider into place. Please make sure to follow appropriate safety precautions when attempting to fix any appliances. For more accurate information on how and where to install this bottom divider basket, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this divider basket is suitable for use on several different models of refrigerators manufactured by General Electric and Hotpoint. This is a genuine part made of high-quality, durable plastic and is sold individually.

This meat pan divider separates foods inside the deli/meat pan to prevent cross-contact and keep items organized for easier access. It restores the original compartment layout so deli trays stay separated and tidy. What it does:

• Fits into the refrigerator's meat/deli pan to create separate sections for different foods
• Prevents items from shifting and mixing during drawer use
• Helps contain juices and reduces cross-contamination between foods
• Useful when cracked, missing, or warped dividers allow foods to mingle

• Slide the divider into the existing grooves or slots in the meat/deli pan; no tools typically required
• Clean surfaces and sanitize the divider before first use
• Do not use in the oven or expose to open flame; intended for refrigerator use only
• Inspect for proper seating after installation to ensure secure separation

2 wire insulator.

A short 8-32 x 3/8 hex washer head screw used to secure small appliance panels and components. Simple replacement for stripped or missing fasteners to restore proper fit and prevent rattles or loose parts. What it does:

• Secures panels, brackets, and small assemblies in place
• Helps eliminate vibration-related noise from loose parts
• Replaces missing, damaged, or corroded screws to restore proper alignment
• Fits standard 8-32 threaded holes requiring a 3/8" length screw

• One 8-32 x 3/8 hex washer head screw

• Use the correct 8-32 driver to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread damage
• Disconnect power and follow appliance safety procedures before accessing internal components
• Replace only like-for-like fasteners in load-bearing or safety-critical locations

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This is a replacement M4 machine screw for securing appliance components and assemblies. It restores proper fit and prevents vibration or loose parts when a small mounting screw is missing or stripped. What it does

• Fastens small panels, brackets, or electronic modules in place
• Restores secure mounting to reduce rattles, vibration, or intermittent connections
• Replaces lost, worn, or stripped original fasteners
• Useful during control board or housing repairs where factory screws are removed

• One M4 x 1.59 machine screw, 10 mm length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; replace with exact screw size to ensure proper fit
• Keep small parts away from children and pets

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This fresh food door handle provides a durable, finished grip for opening and closing the refrigerator fresh food compartment while restoring appearance after a damaged or worn handle. Designed to match brushed bronze finishes. What it does:

• Replaces a cracked, chipped, or broken fresh food door handle so the door opens and closes properly
• Restores the cabinet's appearance by matching brushed bronze trim and finish
• Provides a secure grip to prevent slipping or accidental drops
• Helps prevent further damage to the door exterior and seals caused by using a damaged handle

• One fresh food door handle (brushed bronze) as pictured

• Disconnect power (unplug fridge) before beginning any service
• Removal/installation typically requires basic hand tools; handle fastens to the door with screws or retainers—keep hardware if reusing
• Protect the door finish during installation; avoid overtightening fasteners

This USB port cover replaces a broken or missing cover on the appliance control panel to protect the USB connector from dirt and moisture. It restores a finished appearance and helps keep the port functional. What it does:

• Covers and protects the appliance USB port from dust, moisture, and accidental contact
• Prevents debris from entering the connector, reducing risk of connectivity issues
• Restores the control-panel appearance when the original cover is cracked or lost

• Disconnect power to the appliance before servicing to avoid shock or damage
• Accessible from the control panel; typically snaps into place or secures with small fasteners
• Inspect surrounding trim for damage and replace any broken clips to ensure a secure fit