Cye22up2mbs1 Parts

This freezer door bin support secures the door bin to the freezer door liner, keeping it level and firmly in place. Replace a cracked or missing support to restore stable storage and prevent the bin from popping off the door.

• Supports and locks the freezer door bin to the door liner
• Helps prevent bin wobble, sagging, or unexpected drops
• Replace if tabs are broken, the support is cracked, or the bin won't stay seated
• Common symptoms: bin tilts, falls off, or rattles on the door

• Unplug the refrigerator and remove items from the bin before servicing
• Lift out the door bin to access the support
• Release the old support from the liner; align and press the new support fully into place until secure
• Reinstall the bin and confirm a snug, stable fit before restocking

The Switch Light is an OEM part for GE refrigerators. It is designed to activate the refrigerator’s interior light when the door is opened and turn it off when the door is closed. This ensures visibility inside the refrigerator, making it easy to locate items even in low-light conditions.

Over time, the switch light can become faulty due to wear and tear, exposure to moisture, or repeated use. These factors can cause the switch to malfunction or become unresponsive.

Symptoms of a bad switch light include:

• The refrigerator light not turning on when the door is opened
• The light staying on even when the door is closed
• Flickering or dimming of the interior light
• No response from the light switch when the door is opened or closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Mounts between the fresh food fan assembly and its housing to create an airtight, cushioned seal. Replacing a damaged gasket restores proper airflow and helps stabilize refrigerator temperatures while reducing vibration and noise from the fan area.

• Seals the interface between the fresh food fan and the duct/liner to prevent air leaks
• Directs airflow through the evaporator and vents for consistent cooling
• Cushions the fan mount to minimize vibration and rattling
• Failure may present as weak airflow, temperature swings, or new buzzing near the fresh food fan cover

• Disconnect power before servicing to avoid electrical shock
• Remove shelves/bins and the fresh food rear interior panel to access the fan
• Note gasket orientation; seat it evenly with no gaps and avoid stretching/compressing it
• Ensure the fan spins freely and runs quietly before reassembly

This replacement door bin fits the right-hand fresh food door and restores organized storage for condiments, jars, and small bottles. It helps maximize usable space and keeps frequently used items easy to see and reach.

• Holds condiments, small bottles, and jars on the right fresh food door
• Replaces a cracked, broken, or missing door bin
• Snaps into the molded slots on the door liner for secure storage
• Common symptoms: cracked plastic, broken tabs, won't stay seated, items tipping

• Disconnect power before servicing
• Empty and lift the old bin up and out of the door liner slots
• Align the new bin with the slots and press down until fully seated
• Confirm a secure fit before loading items

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

Restore usable storage on your freezer door with this replacement bin. It mounts to the door to organize small items and keep them secure when opening and closing the freezer.

• Attaches to the freezer door to hold and organize frozen items
• Helps prevent items from tipping or falling when the door moves
• Replace if the bin is cracked, broken, warped, missing, or won't stay seated
• Designed to fit the specified door position on models that use this bin

• Remove the old bin by lifting up and pulling out of the door slots
• Align the new bin's tabs/hooks with the door rails and slide down until fully seated
• No tools or electrical work required; handle plastic carefully to avoid cracking
• Allow it to reach room temperature before installing

The ART FRAME VP ASM is an OEM replacement part for GE refrigerators. It provides an adjustable lid solution to seal the humidified drawers within the fresh food compartment. 

Symptoms of a bad ART FRAME VP ASM include:

• Gaps that fail to maintain proper humidity levels within drawers
• Covers that will not securely latch or lock into place  
• Cracks or breaks inhibiting a proper seal

Causes can include normal wear over time, and accidental impacts compromising the integrity of the plastic material. Warping may occur from overloading.

This GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Box Door Assy is an OEM part for GE refrigerators. It is the complete door assembly housing the storage bins for ice cubes on the fresh food door. 

The Ice Box Door Assy keeps ice conveniently accessible while maintaining cold air containment in the fresh food section.

Causes can involve normal wear over time from frequent use. Accidental dings or impacts can also damage fresh food door components.  

Symptoms of a bad Ice Box Door Assy include:

• Difficulty opening or closing the ice box door
• Improper sealing letting warm air enter the freezer
• Damage or cracks in the plastic door assembly

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

The Icemaker Fan with Thermistor is an OEM part for GE refrigerators. This component circulates chilled air within the icemaker system and includes a built-in thermistor sensor. It monitors temperatures to ensure cubes freeze properly according to cold- and heat-sensing feedback to the refrigerator's control unit. 

Causes of failure can include faulty wiring or connectors related to the electronic thermistor component. The fan motor itself may experience normal wear over extended use.

Symptoms include:  

• Inability to detect freezing temperatures which stops ice production
• Cubes forming inconsistently or not fully freezing before ejection
• High-frequency tripping of the refrigerator's cooling system  
• Loud grinding noises from the icemaker

This GE OEM replacement restores dependable icemaking performance. Equipped with a precise thermistor, it guarantees proper ice formation through monitored temperature control. Compatible with later produced Hotpoint, RCA, and Kenmore refrigerator models as well.
 

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is the top-left refrigerator door bin used on models with in-door ice. It restores secure storage and organization on the door so smaller items stay put when you open and close the refrigerator. What it does:

• Mounts on the top-left door position to hold and organize items near the in-door ice area
• Replaces a cracked, warped, or missing bin
• Helps prevent items from tipping or falling during door movement
• Addresses issues where the original bin won't stay seated or interferes with door closing

• 1 door bin

• Compare to your original to confirm the top-left position and mounting style before installing
• Remove contents; align the bin's tabs/hooks with the door slots and press firmly until fully seated
• Do not force; if working near the dispenser/ice system, power off the refrigerator and shut off water as needed

This replacement Door Ice bottom bin restores secure, usable storage in the lower position of the Door Ice section. Replace a cracked, warped, or missing bin to keep items in place and maximize door capacity. What it does:

• Serves as the bottom shelf/bin in the Door Ice area to hold items securely
• Mounts to the door's molded rails/hooks for a stable fit
• Replace if the bin is cracked, hooks are broken, or it won't stay in place
• Helps prevent items from tipping or falling when the door opens and closes

• 1 bottom Door Ice bin

• Remove items from the bin and area; disconnect power if working near electrical components
• Lift the old bin up and off the door tabs to remove
• Align the new bin with the door slots/tabs and press down until fully seated
• It sits level and secure before reloading items

The Freezer Fan Cover is an OEM part for GE refrigerators. This shroud housing fits securely over the fan and vent area located inside the freezer compartment walls. It directs airflow while protecting internal fan components.

Symptoms of a bad fan cover include:

• Abnormal noises coming from inside freezer walls
• Inability to adequately circulate air and maintain temperature  
• Detected blockages in the ventilation system

Causes can be related to damaged or degraded fan housing material letting in moisture over many cooling and defrost cycles. Cracks may form affecting component protection.

This GE OEM replacement restores optimum air volume and preserves dependable freezer performance. Featuring rigorous testing, it prevents intrusions into sensitive areas while yielding energy savings. Reliably assists in maintaining frozen foods for owners of GE, Hotpoint, RCA, or comparable-design Kenmore freezers as well.
 

The Fresh Food Evaporator Cover with Deli Drawer Fan is an OEM part for GE refrigerators. Located inside the refrigerator compartment, this assembly helps properly circulate cool air throughout. 

Symptoms of a bad evaporator cover or deli fan include:  

• Warm or inconsistent temperatures within sections of the interior
• Frost or ice buildup in areas of poor air circulation
• Abnormal sounds from the fan such as grinding or squealing noises
• The fan fails to spin or rotate when the deli drawer is opened

Causes can be normal wear over time. Dust and debris accumulation may restrict airflow or cause imbalances. Infrequent cleaning allows contaminants to interfere with fan function.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This straight 1/4-inch water line coupler joins two sections of 1/4-inch OD refrigerator tubing, restoring a secure connection in dispenser and icemaker supply lines. Use it to splice, repair, or extend existing tubing.

• Creates an inline union for 1/4-inch OD refrigerator water tubing
• Helps address leaks, cracks, or breaks by replacing a damaged connector or splicing a cut line
• Useful when rerouting lines or adding inline components such as filters
• Common symptoms: water dripping at a tubing joint, loose/disconnected line, reduced or no water to dispenser/ice maker

• Unplug the refrigerator and turn off the water supply; dispense water to relieve pressure
• Cut tubing ends square and clean; ensure both tubes are 1/4-inch OD
• Make secure connections per the coupler design (push-to-connect or compression); ensure tubing is fully seated/assembled and gently pull to verify
• Restore water and check thoroughly for leaks