Cye22up2mbs1 Parts

This silicon controlled rectifier (SCR) switches and regulates power to heating or motor circuits, helping the appliance control temperature and run cycles reliably. It's a direct-fit electronic switching component used in a variety of control systems. What it does:

• Acts as an electronic switch to regulate AC power to heating elements or motors
• Helps control temperature output and maintain consistent cycle performance
• Can prevent unwanted continuous current flow when functioning properly
• Commonly replaced when ovens, ranges, or dryers fail to heat or cycle correctly

• One silicon controlled rectifier (SCR) as shown

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle the SCR by its body; avoid touching terminals and static-sensitive areas
• Verify proper orientation and secure mounting; follow OEM wiring and torque practices

A replacement 1/4-20 screw that secures panels, brackets, and components on compatible appliances for reliable fit and safe operation. Use this fastener to restore proper assembly and reduce rattles or loose parts. What it does:

• Threads into 1/4-20 tapped holes to hold panels, braces, or hardware
• Restores secure attachment where a missing or stripped screw allowed panels or trim to shift
• Helps eliminate vibration noise caused by loose fasteners
• Matches OEM fit for correct alignment and clearance

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct driver or socket to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten securely but do not overtighten
• Keep hardware and small parts away from children and pets

A hex washer-head screw that secures panels and components in household appliances, helping restore stable, rattle-free mounting. Ideal when a mounting screw is missing, stripped, or rusted. What it does:

• Fastens panels, brackets, and internal components with a 1/4-20 thread for secure connections
• Replaces missing or damaged screws that cause loose panels or vibration noises
• Restores proper alignment of parts to prevent rattling and wear
• Works where a hex washer-head profile is required for flush, locked seating

• One hex washer-head screw, 1/4-20 x 3/4

• Use the correct 1/4-inch hex or socket driver to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Do not overtighten; snug until secure to avoid damaging threads or parts
• If screw threads are damaged, replace with the matching OEM part for best fit

This right-hand freezer bracket slide supports the freezer drawer/drawer slide assembly, restoring proper alignment and smooth operation of the drawer. Replace a broken or worn bracket to stop sagging, binding, or falling drawers. What it does

• Secures and guides the freezer drawer slide on the right side
• Restores smooth sliding and proper drawer alignment
• Prevents the drawer from binding, sagging, or coming off the track
• Helps maintain proper support for heavy or loaded drawers

• One right-hand freezer bracket slide

• Disconnect power to the appliance before starting work
• Empty the drawer and remove any obstructing components per service instructions
• Use basic hand tools; ensure the bracket is oriented to match the opposite side
• Check for related damaged slide hardware and replace as needed

This right-side freezer slide holder secures the freezer shelf/slide in place so drawers and shelves glide smoothly and stay supported. A direct-fit replacement when the original holder is cracked, broken or missing. What it does:

• Anchors the freezer slide/shelf on the right side to prevent sagging or detachment
• Restores proper alignment so drawers open and close without catching
• Helps eliminate noise or wobble caused by a damaged holder
• Fits the OEM mounting points for a secure, stable replacement

• Designed for straightforward replacement; remove the freezer shelf or drawer to access the mounting area
• Use basic hand tools; avoid forcing broken plastic parts to prevent further damage
• Disconnect power if removing any interior panels near electrical components
• Inspect adjacent slides and hardware and replace any damaged pieces for best results

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This sound-deadening mastic helps quiet refrigerator operation by damping vibration on components and panels. Replace deteriorated or missing mastic to reduce rattles, buzzing, and metal-to-metal contact for smoother, quieter performance. What it does:

• Damps vibration between sealed-system tubing, compressor mounts, and cabinet surfaces
• Helps reduce humming, rattling, or buzzing noises from the rear/bottom of the unit
• Replaces hardened, cracked, or fallen-off mastic
• Helps prevent metal-to-metal contact that can amplify noise

• Sound-deadening mastic

• Unplug the appliance before accessing the rear compartment
• Remove old material and clean surfaces; ensure they are dry before applying the mastic
• Press firmly to secure; do not obstruct fans, vents, or moving parts
• Avoid stressing or puncturing sealed-system tubing;

This case corner cap is a molded corner cover that restores the finished appearance of a refrigerator cabinet and protects edges from dings and wear. It replaces a cracked, chipped or missing corner and helps keep cabinet panels aligned. What it does

• Covers and protects the cabinet/door corner from impact damage and wear
• Restores a uniform finished appearance for cosmetic repair
• Helps maintain panel alignment at the corner to reduce gaps and rubbing
• Commonly replaced when the corner is cracked, broken, loose or missing

• Disconnect power and remove food from the area before starting repairs.
• Remove any trim or fasteners securing the old cap; install the replacement by snapping or fastening into place as designed.
• Avoid forcing the cap; ensure clips or tabs align to prevent damage.
• If clips or underlying trim are damaged, replace those parts as needed for a secure fit.

The Silicone & Mesh Tube with Clamps is an OEM part for GE refrigerators. It ensures a secure and leak-free connection on the dispenser system. 

Causes of a bad silicone and mesh tube with clamps can include wear and tear over time, exposure to extreme temperatures, or damage due to accidental impact or mishandling.

Symptoms of a bad silicone and mesh tube include:

• Leaks or drips from the dispenser system.
• Reduced water flow or inconsistent ice production.
• Difficulty in dispensing water or ice.

Replace your worn-out or damaged silicone and mesh tube with clamps with this genuine OEM part to restore your refrigerator's dispenser system. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A rubber tubing grommet that fits a factory hole to protect and cushion refrigerant/water tubing and help prevent chafing or leaks. Simple, durable replacement that restores a sealed pass-through for tubing. What it does:

• Cushions and protects tubing where it passes through sheet metal or plastic openings
• Helps prevent chafing, rubbing and premature tubing wear
• Provides a cleaner, more secure tubing pass-through to reduce leak risk
• Commonly used on water lines, refrigerant lines or small-diameter tubing in appliances

• One tubing grommet

• Disconnect power and water supply before servicing the appliance
• Remove access panels as needed to reach the tubing hole; press-fit the grommet into the opening and route tubing through the slit
• Replace grommet if cracked, torn or excessively worn; ensure tubing is properly seated in the grommet
• Do not use sharp tools that could damage the grommet or tubing during installation

This middle door cover is the molded interior trim piece that restores the refrigerator door's appearance and protects internal components and insulation. Replacing a damaged cover improves fit and looks without changing door function. What it does:

• Covers and protects internal door cavities, wiring and insulation behind the middle section
• Restores a secure mounting surface for door bins and shelves
• Replaces cracked, warped or cosmetically damaged trim that allows gaps or loose fittings
• Helps maintain a proper door seal by ensuring correct bin/shelf alignment

• One middle door cover (dark gray)

• Disconnect power to the appliance before servicing
• Remove door bins/shelves and any fasteners that secure the cover; keep hardware for reuse
• Align tabs and screw holes, then install using the original fasteners; do not force the part into place

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety