Dacor Drt304s Parts

This O-ring seals the igniter assembly to prevent gas or air leaks and help ensure reliable ignition performance. It's a small replacement seal used when the original is worn, cracked, or missing. What it does:

• Creates a tight seal around the igniter assembly to reduce leaks
• Helps maintain proper ignition performance by keeping components sealed
• Commonly replaced if brittle, cracked, flattened, or after igniter service
• Small, inexpensive part that protects nearby components from gas or moisture exposure

• One O-ring (igniter) as pictured

• Turn off gas and power to the appliance before servicing
• Replace only with the exact O-ring size for your igniter to ensure a proper seal
• Inspect surrounding gaskets and components and replace if damaged

This blue indicator light restores the appliance's status illumination in the control area. Replace it if the original light is dim, flickering, or no longer illuminates so you can quickly see when a function is active.

• Provides a blue visual indication of operation/status on the control panel
• Helps at a glance when a feature is on
• Common fix for a light that won't turn on, is dim, flickers, or is physically damaged
• Direct-fit service part designed to connect to the original wiring and mounting points

• Disconnect power at the breaker or unplug the appliance before service
• Allow nearby surfaces and components to cool
• Access the indicator light from the control area; remove panels as needed
• Move connectors one at a time and route wiring as originally installed; test before reassembly

This inner burner cap for an 18K burner sits over the burner head to shape the flame and shield the ports. Replacing a worn or missing cap restores stable flames, reliable ignition, and consistent cooking performance. What it does

• Positions over the 18K burner head to concentrate and stabilize the flame
• Helps protect burner ports from spills and debris
• Proper seating supports quick, consistent ignition
• Common symptoms of a bad or misaligned cap include uneven or yellow flames, poor simmering, or continuous clicking without ignition

• One inner burner cap

• Turn off gas and power; allow the cooktop to cool completely
• Remove the old cap; clean and dry the burner head and ports
• Set the new inner cap flat and centered on the burner; do not force
• Test ignition and adjust cap position if the flame is uneven or noisy

This outer surface burner cap replaces a damaged or missing cap to protect the burner head and help restore proper flame distribution for consistent cooking. Designed for the outer burner position on compatible Samsung gas ranges and cooktops. What it does:

• Covers the burner head to help shape the flame and protect internal burner components.
• Restores more even heating when the outer cap is cracked, chipped, warped, or missing.
• Helps keep food, grease and spills out of the burner head and igniter area.
• Reduces uneven flames and intermittent ignition caused by a poorly seated or damaged cap.

• Turn off the appliance and gas supply and allow all parts to cool completely before handling.
• Lift the old cap straight up from the burner head; place the replacement cap aligned over the burner post until it sits flat.
• No special tools typically required; inspect the burner head and igniter for debris and clean if needed.

This reignition plug is the replacement electrode that helps relight a gas burner or oven burner when the flame goes out, restoring the appliance's automatic re-ignition function for safer, more reliable operation. What it does:

• Serves as the spark electrode that senses/flame and creates a spark to re-ignite a gas burner
• Helps stop continuous clicking when the burner fails to light
• Addresses symptoms like a burner that won't light or that repeatedly goes out
• Works as a direct replacement for the single reignition electrode in compatible Samsung gas ranges/ovens

• Turn off gas supply and disconnect power to the appliance before servicing
• Handle the electrode carefully — avoid bending or damaging the ceramic insulator or wire lead
• Ensure proper seating and secure connections; consult OEM service literature for routing and torque where specified

A single aluminum low-pressure service valve that provides a sealed access point for refrigerant charging, evacuation and pressure checks. Designed to restore proper serviceability for refrigeration and sealed-system maintenance. What it does:

• Provides a dedicated, sealed port for connecting gauges and service equipment to the low-pressure side of the refrigeration system.
• Allows safe charging, evacuation and pressure testing during diagnostics and repairs.
• Helps isolate and reseal the system after service to prevent refrigerant leaks.
• Commonly used when a refrigerator or freezer needs refrigerant service or pressure verification.

• Intended for experienced technicians; refrigerant work should follow all local regulations and EPA/other certification requirements.
• Depressurize and recover refrigerant before removing or replacing the valve.
• Inspect and replace any sealing O-rings, fittings or gaskets as needed; torque to OEM specifications.
• Test for leaks and proper operation before returning the appliance to service.

This single aluminum service valve is a sealed-system access valve used on compatible refrigeration systems to allow safe service, pressure checks and refrigerant charging. It provides a reliable access point without replacing major components. What it does

• Provides a sealed access point for refrigerant charging, pressure testing and diagnostic service
• Helps isolate the refrigerant line during repairs or evacuation
• Reduces the need to disturb larger sealed-system components when performing service
• Commonly used when addressing pressure/charge-related symptoms or performing routine diagnostics

• One single aluminum service valve

• Follow all refrigerant-handling regulations and use proper recovery equipment
• Depressurize the system and verify zero pressure before removing or installing the valve
• Inspect fittings and gaskets for damage and replace as needed to ensure a proper seal

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

This is a replacement service screw used to secure panels and small components in compatible Samsung appliances. It restores proper fastening where a worn, damaged, or missing screw leaves parts loose. What it does

• Replaces a missing or stripped M4 x 12 mm machine screw to secure panels, brackets, or assemblies
• Stops rattling or vibration caused by loose fasteners
• Helps maintain proper alignment of small service panels and components
• Suitable where an A2 (stainless) screw is required for corrosion resistance

• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Disconnect power to the appliance before servicing nearby electrical components
• Keep small parts away from children and collect any dropped screws to avoid damage