Dacor Er30dsr Parts

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This dual burner gasket seals the dual burner assembly to the cooktop surface, keeping spills out and the burner properly supported. Replacing a worn gasket restores a snug fit and consistent, reliable burner operation.

• Creates a tight barrier between the dual burner base and the cooktop
• Helps maintain correct burner height and alignment for stable operation
• Limits liquid and debris intrusion that can cause corrosion or binding
• Common signs: visible cracking/flattening, burner not sitting flush, liquids seeping below, or the burner shifting during use

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Remove grates, caps, and burner components to access and remove the old gasket
• Clean mating surfaces before installation; do not stretch or twist the new gasket
• Reassemble and verify the burner sits flat and operates normally

This replacement oven rack restores a stable cooking surface for slide-in and built-in ranges, letting cookware sit level for even baking and broiling. Durable wire construction resists warping under normal oven temperatures. What it does:

• Replaces a bent, warped or missing oven rack to restore safe, even cooking
• Provides a stable platform for pans, baking sheets and cookware
• Slides in and out on factory rack supports for easy access to food
• Resists heat exposure and typical wear from regular use

• No special tools required; rack slides into existing oven supports
• Ensure oven is completely cool before installing or handling
• If rack does not seat properly, support rails are undamaged and aligned
• Follow oven manufacturer's safety warnings and disconnect power if servicing nearby components

This male service connector provides a secure connection point for refrigeration service access on compatible appliances, allowing technicians to attach service hoses for pressure checks and refrigerant handling during maintenance. What it does:

• Connects a service hose to the appliance service port for pressure testing and diagnostics
• Enables refrigerant charging and evacuation when used with proper service equipment
• Provides a sealed interface to minimize leaks at the service access point
• Helps restore proper serviceability when the original connector is damaged or worn

• For use by qualified appliance or refrigeration technicians only; follow all refrigerant-handling regulations
• Depressurize and isolate the system before removal or installation
• Use appropriate tools and leak-testing methods after installation
• Replace any damaged seals or gaskets and ensure a proper torque on fittings

This bake element is the oven's primary lower heating element that provides consistent heat for baking and roasting. It restores proper oven heating so cookware reaches and maintains set temperatures. What it does:

• Heats the oven cavity during bake cycles for even cooking and browning
• Replaces a burned-out, broken, or intermittently working lower element
• Helps resolve symptoms like no heat on bake, uneven baking, or visible damage/warping
• Works with the oven's control and safety systems to operate during bake modes

• One bake (lower) oven heating element

• Disconnect power at the breaker before starting any repair
• Element mounts with accessible screws and connects to terminal wires — confirm terminals are secure
• Inspect wiring and oven insulation; replace damaged wiring or connectors as needed

This service assembly secures and aligns the injector used in the appliance's dispensing/ice/water system, restoring proper positioning and reliable flow. Replace a damaged holder to stop misalignment that can cause leaks or intermittent dispensing. What it does:

• Holds and aligns the injector/nozzle in the dispenser or ice/water delivery path
• Keeps seals and hoses seated to prevent leaks and poor water flow
• Restores correct injector position when cracked, warped, or broken
• Helps resolve intermittent dispensing or dispenser misfeeds tied to misalignment

• Disconnect power and shut off water supply before beginning any repair
• Remove access panels and mounting fasteners to access the injector area; handle plastic clips gently to avoid breakage
• Inspect adjacent seals, hoses and the injector for damage; replace any worn parts as needed

This dual burner base assembly replaces the damaged or worn support that holds two cooktop burners in place, restoring proper alignment and stable burner seating for safer, more consistent heating. What it does

• Secures and centers two burner elements so they sit flat and stable
• Prevents burner wobble and misalignment that can cause uneven heating
• Provides the structural support for burners and related mounting hardware
• Works with original cooktop components to maintain proper burner positioning

• Disconnect power (and gas if applicable) to the appliance before starting work.
• Remove the cooktop or control panel per the manufacturer's service instructions to access the burner base.
• Inspect nearby components (burner caps, elements, clips) and replace any damaged parts for best results.

This regulator assembly controls LP gas pressure to the appliance's valve system, restoring correct burner and oven flame performance when the factory regulator is faulty. It helps ensure steady, adjustable gas flow for safe operation. What it does:

• Regulates LP gas pressure delivered to the appliance's valves and burners
• Can be used when burners have low, weak, or uneven flames
• Addresses issues where burners or oven fail to reach proper heat
• Supports proper gas delivery after conversion or regulator failure

• One regulator assembly (LP), 3/4 in

• Turn off gas supply and unplug the appliance before servicing
• Use proper gas fittings and thread sealant rated for gas; check for leaks after installation
• Tighten fittings securely but avoid over-torquing; follow OEM torque guidance if available

This upper oven broil element provides direct radiant heat for broiling and browning, restoring high-heat performance to the oven. Designed to match the OEM fit and function for affected Samsung ranges. What it does:

• Heats the top of the oven cavity for broiling, searing and browning
• Replaces a burnt, visibly damaged, or non-heating broil element
• Helps restore even top-down cooking when the broil function fails
• Works with factory mounting and terminal connections for an OEM-like replacement

• Disconnect power at the breaker before starting—this part connects to live AC terminals
• Handle carefully; sharp sheet-metal edges can be present inside the oven cavity
• Verify element terminals and mounting holes match your oven before final installation

This internal convection fan circulates heated air inside the oven cavity to promote more even cooking and consistent temperatures. It replaces a failed or noisy fan to restore proper convection performance. What it does:

• Circulates hot air for even baking and roasting
• Helps maintain consistent oven temperatures during convection cycles
• A faulty fan can cause uneven cooking, loss of convection function, or unusual noise
• Works as the internal blower assembly that directs airflow from the heating element

• Disconnect power to the range before beginning any repair.
• Handle the fan and housing carefully to avoid bending blades or touching sharp sheet-metal edges.
• Verify proper mounting and secure electrical connections; do not run the oven with loose hardware.