Dacor Er30g Parts

This dual burner gasket seals the burner assembly to the cooktop surface. Replacing a worn or missing seal helps contain spills, maintain proper airflow for a steady flame, and protect the cooktop from heat and moisture intrusion.

• Creates a tight seal between the dual burner base and the cooktop
• Helps maintain proper air/gas flow for consistent ignition and flame quality
• Helps keep spills and debris out of internal burner compartments
• Replace if the seal is cracked, flattened, brittle, or missing; or if flames lift or yellow around the burner

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the appliance to cool completely before disassembly
• Remove grate, burner cap, and burner head to access the seal; clean mating surfaces before installing
• Seat the gasket flat without stretching; reassemble and verify proper burner operation per manufacturer instructions

This inner burner cap for an 18K burner sits over the burner head to shape the flame and shield the ports. Replacing a worn or missing cap restores stable flames, reliable ignition, and consistent cooking performance. What it does

• Positions over the 18K burner head to concentrate and stabilize the flame
• Helps protect burner ports from spills and debris
• Proper seating supports quick, consistent ignition
• Common symptoms of a bad or misaligned cap include uneven or yellow flames, poor simmering, or continuous clicking without ignition

• One inner burner cap

• Turn off gas and power; allow the cooktop to cool completely
• Remove the old cap; clean and dry the burner head and ports
• Set the new inner cap flat and centered on the burner; do not force
• Test ignition and adjust cap position if the flame is uneven or noisy

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This outer surface burner ring replaces the damaged or worn ring on a gas cooktop, restoring proper gas flow and burner alignment for safer, more even heating. Fits specified Samsung surface burners. What it does:

• Replaces a cracked, warped or corroded outer burner ring to re-establish correct burner geometry
• Helps restore consistent flame pattern and even cooking across the burner
• Can resolve issues like uneven heating or gas flame wandering at the burner edge
• Works with the matching inner burner and cap to form the complete burner assembly

• One outer surface burner ring

• Turn off gas supply and disconnect power to the appliance before servicing
• Allow all components to cool completely; burner parts may have sharp edges—wear gloves
• Remove burner cap and inner components, seat the new outer ring fully before reassembly

This replacement burner cap restores the protective top for a gas cooktop burner, helping maintain proper flame shape and more consistent heat distribution for everyday cooking. Use when a cap is cracked, chipped, or missing. What it does:

• Sits on the burner head to protect the burner and shape the flame for even heat
• Helps promote reliable ignition and steady flame performance
• Replace if the cap is warped, cracked, or causing the flame to burn unevenly
• Matches the OEM service part designed for direct replacement on compatible gas ranges

• Turn off the appliance power and gas supply before servicing.
• Remove grates and lift off the old cap; set the new cap flat on the burner head so it seats evenly.

This illuminated service knob replaces a worn or damaged control knob to restore a visible, easy-to-use control point on your appliance. It provides the same look and basic control function as the original part. What it does:

• Replaces a damaged or faded control knob so settings can be selected and seen clearly
• Illuminated design improves visibility in low light and matches factory appearance
• Fits the original control shaft and detents for reliable selection feel
• Helps address symptoms like loose, cracked, non-illuminating, or cosmetically worn knobs

• 1 illuminated service knob

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Pull the old knob straight off the control shaft; push the replacement knob onto the shaft until it seats
• If illumination does not work after replacement, verify lamp/LED and wiring with the model-specific service instructions

This replacement oven rack restores cooking surface support for convection ovens and lets cookware sit securely for even baking. Designed to match the original oven shelving for proper fit and airflow. What it does:

• Provides a stable shelf for pans, bakeware, and racks inside the oven cavity
• Positions food for improved convection airflow and more even cooking
• Replaces bent, damaged, or missing racks that interfere with sliding or heat distribution

• Install by sliding the rack into the oven's side supports until fully seated; no tools typically required
• Allow the oven to cool and disconnect power before handling or installing to avoid burns or electric shock
• Inspect side supports and rack guides for damage; replace worn guides if the rack does not seat securely
• Clean rack with warm soapy water or a non-abrasive cleaner before first use if needed

This straight bake burner replaces the oven's lower gas burner to restore consistent bake heat and flame. It installs in the oven floor and connects to the regulator and igniter assembly for normal gas flow to the bake chamber. What it does:

• Provides the primary gas flame for the oven's bake function
• Restores even baking when the oven fails to reach or hold set temperatures
• Replaces corroded, warped, or damaged burner tubes that produce weak or irregular flames
• Helps eliminate yellow or sputtering flames caused by burner damage or blockage

• One straight bake burner assembly

• Shut off power and gas supply before beginning service; follow all local codes
• Basic hand tools are typically required; gentle handling prevents deformation of the burner tube