Dacor Er48dsch Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

This re-ignition module controls spark for gas surface burners and automatically re-sparks if the flame goes out, helping burners ignite consistently and stay lit when the original module has failed. What it does:

• Sends high-voltage pulses to the burner igniters to light gas
• Provides re-ignition if a burner flame is extinguished
• Distributes spark output to multiple burners as designed
• Common failure symptoms: no spark on all or most burners, continuous clicking, or intermittent ignition across burners

• 1 re-ignition module

• Disconnect electrical power at the breaker and shut off gas supply before servicing
• Access location varies by model; remove rear cover or top as required
• Label and transfer each wire one at a time; mount the module securely and route wires away from heat
• After installation, test each burner for proper ignition and that clicking stops once flame is established

A replacement bake glass panel for the oven door that restores the viewing window and barrier between the oven cavity and exterior. Helps maintain a clear view of cooking and restores the door's protective glass. What it does:

• Replaces cracked, chipped, or fogged oven door glass to restore visibility and appearance
• Provides the glass barrier that helps contain heat inside the oven cavity
• Reduces drafts or heat loss from a damaged door glass
• Works as the visible window for monitoring food without opening the door

• One oven door bake glass panel

• Disconnect power to the appliance before beginning any repairs
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation may require removing the oven door and separating door panels—refer to OEM service instructions
• Reuse existing parts or obtain OEM replacements

The Halogen Light Assembly is an OEM part for Samsung ovens. It provides illumination within the oven cavity, allowing you to easily monitor the cooking progress of your dishes.

A bad halogen light assembly can be caused by electrical issues, component failure, or damage to the bulb or socket. When the light assembly malfunctions, it can result in a range of problems, such as no light being emitted, flickering light, or the bulb not turning on at all.

Symptoms of a bad halogen light assembly include:

• No light emitted from the oven cavity
• Flickering light or poor illumination
• Bulb not turning on when the oven is in use
• Error codes displayed on the control panel

Replace your faulty halogen light assembly with this genuine OEM part to restore your oven. This Samsung part can also be used on Kenmore/Sears appliances. 
 

This dual burner gasket seals the dual burner assembly to the cooktop surface, keeping spills out and the burner properly supported. Replacing a worn gasket restores a snug fit and consistent, reliable burner operation.

• Creates a tight barrier between the dual burner base and the cooktop
• Helps maintain correct burner height and alignment for stable operation
• Limits liquid and debris intrusion that can cause corrosion or binding
• Common signs: visible cracking/flattening, burner not sitting flush, liquids seeping below, or the burner shifting during use

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Remove grates, caps, and burner components to access and remove the old gasket
• Clean mating surfaces before installation; do not stretch or twist the new gasket
• Reassemble and verify the burner sits flat and operates normally

This control panel membrane is the thin, flexible keypad overlay that sits over the microwave's control board, restoring button response and a clean appearance for the front control panel. Replaces worn, unresponsive, or damaged keypads. What it does

• Provides the tactile surface and contact pads for the microwave's front control buttons.
• Restores reliable button activation when keys are sticky, faded, or no longer register presses.
• Protects the underlying circuit board from dust and spills at the control area.
• Improves the appearance of a worn or discolored control panel.

• One control panel membrane (keypad) as shown.

• Disconnect power before servicing to avoid shock; unplug the appliance or shut off the circuit breaker.
• Replace the membrane by removing the outer control bezel and detaching the old overlay from the control assembly; handle gently to avoid damaging ribbon contacts.
• Ensure connectors and ribbon cables are fully seated before reassembling. Test button function before completing reassembly.

This is the upper/broil heating element for electric ovens, designed to restore high-heat broiling and even top-surface browning. Replaces a failed broil coil so your oven can reach proper broil temperatures again. What it does:

• Provides the intense, direct heat required for broiling and browning food
• Heats the oven's upper cavity so broil cycles reach target temperatures
• Commonly fails open or shorts, causing no broil heat or a tripped breaker
• Restores consistent top-element performance when damaged, burned, or broken

• One broil (upper) heating element

• Disconnect power at the breaker before attempting any service
• Allow the oven to cool completely; heating elements can be hot or fragile
• Remove the oven racks and access the element mounting screws; support the element while disconnecting wiring

This male service connector provides a secure connection point for refrigeration service access on compatible appliances, allowing technicians to attach service hoses for pressure checks and refrigerant handling during maintenance. What it does:

• Connects a service hose to the appliance service port for pressure testing and diagnostics
• Enables refrigerant charging and evacuation when used with proper service equipment
• Provides a sealed interface to minimize leaks at the service access point
• Helps restore proper serviceability when the original connector is damaged or worn

• For use by qualified appliance or refrigeration technicians only; follow all refrigerant-handling regulations
• Depressurize and isolate the system before removal or installation
• Use appropriate tools and leak-testing methods after installation
• Replace any damaged seals or gaskets and ensure a proper torque on fittings

This service spill tray is a molded replacement tray that sits under the appliance to catch and channel small water leaks and drips, helping protect the cabinet and floor from moisture damage. What it does:

• Collects and directs minor water from leaks, condensation, or ice maker/defrost drip
• Prevents water from pooling under the appliance and reaching flooring
• Replaces cracked, warped, or missing trays that allow leaks to spread
• Helps identify and contain source of slow leaks during diagnosis

• One spill tray (center, 14 x 24 in.)

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or components as needed to access the tray; keep fasteners for reassembly
• Verify correct orientation and seating of the tray before restoring power
• If tray was damaged by a leak, repair the underlying cause before installing replacement

This rubber O-ring seals the 8,500 BTU surface burner assembly to prevent gas and air leaks. A proper seal helps ensure reliable ignition and steady flame on the matching burner.

• Seals the 8,500 BTU burner/orifice connection to maintain correct gas flow
• Can help resolve issues like weak, uneven, or flickering flame on the designated burner
• Replacing a hardened, cracked, or swollen O-ring restores a proper seal

• Disconnect power and shut off gas before servicing
• Allow the cooktop/range to cool completely
• Access the burner assembly per your model's service procedure; avoid damaging adjacent gaskets
• Inspect mating surfaces and reinstall components evenly to ensure a proper seal

This service spill tray replaces a cracked or damaged left-side defrost/drip tray to help contain meltwater and prevent leaks under the refrigerator. It restores proper drainage and protection for the cabinet floor. What it does

• Catches and channels defrost or condensation water away from refrigerator components.
• Helps prevent water pooling and potential floor damage from leaks.
• Restores a secure mounting surface when the original tray is cracked, warped, or missing.
• Matches the left-side tray location and specified 14 x 24 size for a correct fit.

• One service spill tray (left-side, 14 x 24) as shown.

• Disconnect power to the appliance before starting any service work.
• Remove shelves, drawers, or kick plate as needed for access; handle plastic parts gently to avoid damage.
• Verify tray orientation and seating before reassembling; do not force parts into place.

This wire harness routes power between the oven's control and the bake/broil elements to enable consistent heating. It replaces a damaged or worn harness to restore reliable bake and broil function. What it does:

• Connects bake and broil heating elements to the oven control and terminal block
• Provides secure wiring paths and insulated connections to prevent shorts
• Commonly replaced when bake or broil functions fail or work intermittently
• Helps stop issues like no heat, uneven heating, or tripped breakers caused by damaged wires

• Always disconnect power to the appliance before starting any repair
• Inspect connectors and terminals for corrosion or damage; replace if necessary
• Route harness to avoid contact with sharp edges or high-heat surfaces