Dacor Rgc365sng Parts

This LED socket assembly restores the high-intensity indicator lighting used on select cooktops to show an active cooking zone. Replace a failed module to bring back clear, consistent illumination. What it does:

• Provides bright LED illumination for a cooking zone indicator
• Restores visual feedback that a burner/zone is in use
• Replaces a failed or damaged LED socket/module
• Common symptoms: no light, dim or flickering light, intermittent operation, or physical damage

• One LED socket assembly

• Disconnect power at the breaker before servicing
• Allow the appliance to cool and protect the glass surface while working
• Access the module from beneath the cooktop; match connector orientation and mounting position
• Test illumination before final reassembly

This igniter service kit replaces a worn or failed spark igniter assembly so the appliance can light reliably. It restores ignition performance for cooktop or range burners that fail to spark. What it does

• Replaces the spark igniter assembly that produces the spark to light a burner.
• Common symptom: burner will not ignite or sparks are weak/intermittent.
• Helps stop continuous clicking when a burner won't light.
• Restores normal ignition function after physical damage or wear.

• One igniter service kit (single kit as shipped)

• Turn off power and gas supply before servicing; follow all safety precautions.
• Basic hand tools required; some kits include mounting hardware—verify kit contents before installation.
• After installation, check for proper ignition and gas-tight connections.

This blue indicator light restores the appliance's status illumination in the control area. Replace it if the original light is dim, flickering, or no longer illuminates so you can quickly see when a function is active.

• Provides a blue visual indication of operation/status on the control panel
• Helps at a glance when a feature is on
• Common fix for a light that won't turn on, is dim, flickers, or is physically damaged
• Direct-fit service part designed to connect to the original wiring and mounting points

• Disconnect power at the breaker or unplug the appliance before service
• Allow nearby surfaces and components to cool
• Access the indicator light from the control area; remove panels as needed
• Move connectors one at a time and route wiring as originally installed; test before reassembly

This microswitch is a small electrical switch used in cooking appliances. It helps signal control circuits when a lever, knob, or mechanism reaches a specific position, supporting safe and reliable appliance operation.

• Provides an on/off signal to the control system when actuated by a linked mechanism
• Worn or failed microswitches can cause intermittent operation or no response from the related function
• Help resolve issues like features not activating, inconsistent engagement, or unexpected shutoff

• Disconnect power and shut off gas before servicing
• Access location varies by model; take photos of wiring and orientation for reference
• Handle terminals carefully to avoid bending or loosening connections
• Address signs of heat damage or corrosion on connectors before reassembly

A replacement door boot gasket kit for front-load washers that seals the wash tub to help prevent leaks and keep laundry contained. Replaces worn, torn, or deteriorated gaskets to restore a tight door seal and minimize water escape. What it does:

• Creates a watertight seal between the washer door and drum to prevent leaks during cycles
• Helps stop common symptoms like visible leaks, water on the floor, or dripping from the door area
• Replaces gaskets with tears, cracks, or heavy mold buildup that cleaning can't fix
• Restores proper door closure and reduces odors caused by trapped moisture

• One door gasket kit

• Disconnect power and shut off water supply before beginning work
• Remove the washer door and old gasket to avoid damage
• Clean the sealing surface and align the gasket fully before securing
• After installation, run a short rinse or test cycle and inspect for leaks

This retaining ring secures the LED assembly in place, keeping indicator lights and display components stable for reliable operation. It's a small but important part that helps prevent loose or misaligned LED modules. What it does:

• Holds the LED assembly securely to the control/display area
• Prevents movement or rattling of indicator lights during operation
• Helps maintain proper alignment so LEDs remain visible and functional
• Can address symptoms like loose display trim, vibrating noises, or intermittently obscured LEDs

• Disconnect power before starting any repair to avoid shock or damage
• Handle the LED assembly and connectors gently to avoid breaking LEDs or wiring
• Use basic hand tools; avoid forcing the ring—align and snap into place per OEM guidance

This LED isolator board supplies and protects the LED lighting/display circuitry on compatible Samsung appliances. It restores proper LED operation by isolating and regulating the LED power feed for reliable lighting and display performance. What it does:

• Routes and isolates power specifically for LED modules and display LEDs
• Helps stop LED flicker, dimming, or intermittent lighting caused by a failing isolator board
• Supports stable LED backlight and control signals to the appliance display
• Serves as a direct replacement for the original service board when the LED circuit is at fault

• One LED isolator/service board (DE81-06682A)

• Disconnect all power to the appliance before starting any repairs
• Handle the PCB by its edges and avoid static-sensitive contact with components
• Verify correct board orientation and connector seating during installation

This Torx-head #6-32 replacement screw secures the refrigerator service pan and related trim pieces, restoring proper fit and preventing pan movement. Use it when a screw is missing, stripped, or corroded. What it does:

• Fastens the service pan or service-panel trim to the cabinet to keep parts aligned
• Prevents rattling or shifting that can occur from a missing or loose fastener
• Replaces stripped or corroded factory screws for a secure hold
• Works with standard Torx drivers for straightforward removal and installation

• Disconnect power to the appliance before starting any repair
• Remove the access panel or service pan per the manufacturer's instructions to reach screw locations
• Use the correct Torx driver to avoid cam-out or screw head damage
• Do not overtighten; snug until secure to avoid stripping threads or deforming plastic parts