Dcv660eh0bb Parts

This screw is a factory replacement fastener used to secure appliance panels and components. It restores lost or loose hardware so parts sit correctly and operate without rattling or movement. What it does

• Secures panels, brackets, and small components to the appliance frame
• Restores proper alignment and helps eliminate rattling or vibration
• Replaces missing or stripped fasteners that prevent parts from staying fixed
• Matches OEM fit for reliable fastening where the original screw was used

• One replacement screw

• Use the correct-size screwdriver or driver bit to avoid stripping the head
• Power off and unplug the appliance before accessing internal components
• Tighten snugly but avoid overtightening to prevent thread damage
• Keep removed hardware organized so you can install replacements in the original locations

This replacement leveling leg threads into the base of your appliance to support and stabilize it. Adjusting the leg lets you level the unit on uneven floors, helping cut vibration, movement, and rattling during operation.

• Threads into the base to support and level the unit
• Adjusts height to correct rocking or wobble
• Helps reduce vibration, walking, and rattling noises
• Useful when a leg is missing, bent, or the foot pad is worn

• Disconnect power; for gas models, also shut off the gas supply
• With a helper, carefully tip the unit to access the legs
• Unscrew the worn or damaged leg; thread the new leg in by hand to avoid cross-threading, then snug as needed
• Adjust all legs and verify the cabinet is level front-to-back and side-to-side with a bubble level

This idler bracket assembly secures the dryer idler pulley and maintains proper belt tension so the drum rotates smoothly. Replacing a worn bracket restores belt alignment and prevents slipping or squealing during operation. What it does:

• Holds the idler pulley in place to keep the drive belt tensioned
• Keeps the dryer drum turning evenly for efficient tumbling
• Commonly replaces brackets that are cracked, bent, or causing belt misalignment
• Can stop symptoms such as belt slipping, rubbing noises, or uneven drum rotation

• Disconnect power and unplug the dryer before starting any repair
• Inspect the idler pulley and drive belt while replacing the bracket; replace if worn
• Basic hand tools required; refer to the appliance's service manual for model-specific disassembly steps

This gas diffuser directs and evens the burner flame for reliable cooking performance. It helps stabilize heat distribution so burners light and heat more consistently across cookware. What it does:

• Spreads and evens gas flame to reduce hot spots and uneven cooking
• Helps stabilize burner ignition and maintain consistent flame shape
• Prevents direct flame contact with surrounding components
• Addresses symptoms like uneven heating, unstable flame, or partial burner operation

• One gas diffuser

• Turn off the gas supply and unplug the appliance before servicing
• Use basic hand tools; avoid overtightening or distorting the part
• If corrosion or sealed fasteners are present, replace affected hardware and check surrounding components

This ceramic terminal insulator protects and supports a range or oven heating-element electrical connection, helping prevent shorts and arcing at high temperatures. It's a simple replacement to restore a secure, insulated terminal connection. What it does

• Insulates and isolates a heating-element or terminal connection from the metal chassis to prevent electrical shorts.
• Helps maintain a stable connection under high-heat conditions so the element can heat properly.
• Common symptom replacement: visible cracking, chipping, burn marks, arcing, or intermittent heating.
• Also used when terminals are loose or the original insulator is missing or degraded.

• One ceramic terminal insulator

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Inspect surrounding terminals and wiring; replace damaged connectors or hardware as needed.
• Handle carefully—ceramic can chip or break if dropped or over-tightened.

This OEM replacement part is the main control board for dryers. The main control board is the part that controls the functions of a dryer. It is the main component that sends signals to the dryer to perform its intended functions, controlling the desired dryer settings. If the dryer is no longer turning on, spinning properly, or effectively drying, it might be time to replace the main control board. While it might seem difficult to replace this part, it's actually a simple process. First, pull the dryer forward to access the back panel. Remove the upper back panel. Push the front of the control panel and pry it up with a putty knife removing it from the mounting brackets. Disconnect any wires attached to the old control board and be sure to take note of which wires go where by taking a photo with a phone camera. Then disconnect the air hose. Remove the mounting screws from the control board. Release the locking tabs and pull the control board out of the console. Position the new board in place and pop it into the locking tabs. Reconnect the air hose to the back of the control panel, and reconnect the wires into the back of the new control board.This genuine control board is compatible with General Electric, Hotpoint, RCA, and Sears/Kenmore brand dryers.

This GE Roller Assembly is an OEM replacement part for GE dryers. It plays a role in the smoothness and efficient operation of the dryer drum.

Roller assemblies can go bad over time due to regular use, accumulation of lint and debris, or mechanical strain. A failing roller assembly might lead to a range of operational issues in the dryer. Identifying and addressing these issues early is crucial to maintaining the appliance's efficiency and prolonging its lifespan.

Symptoms of a bad Roller Assembly include:

• Unusual noises, such as thumping or squeaking, when the dryer is running.
• The dryer drum struggling to rotate smoothly or getting stuck.
• Increased vibration or shaking of the dryer during operation.
• The dryer drum appears misaligned or wobbles during use.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

The Motor Assembly is an OEM component specifically designed for GE laundry machines. This assembly contains the motor and blower wheel that are responsible for forcing air through the dryer and circulating hot air around clothes during the drying cycle. 

Causes of a bad motor assembly can include wear and tear over time, exposure to high heat cycles that can depreciate motor insulation or bearings, or damage due to impact or mishandling. 

Symptoms of a bad motor assembly include:

• The dryer not heating or only heating intermittently  
• Loud grinding or knocking noises originating from the motor area
• The blower wheel no longer spins or turns slowly
• Extended drying times 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This ground screw secures the appliance chassis ground connection to the cabinet, restoring a reliable earth path for safe operation and reducing risk of electrical faults. Simple replacement keeps electrical components properly grounded. What it does

• Secures the ground wire or grounding strap to the appliance chassis to maintain a safe earth connection.
• Restores proper grounding when the original screw is missing, loose, or corroded.
• Helps prevent intermittent power/grounding issues and reduces risk of electrical arcing at the chassis connection.
• Works wherever a dedicated grounding point is required on the cabinet or frame.

• Single ground screw

• Always disconnect power (unplug or switch off circuit breaker) before servicing electrical connections.
• Verify chassis is de-energized and wear appropriate PPE when working on electrical parts.
• Use the correct driver bit and size to avoid stripping the screw; tighten securely but avoid over-torquing.
• Replace corroded grounding hardware and ensure the ground wire/strap has clean metal-to-metal contact.

This M4 x 16 mm machine screw secures appliance components where a small metric fastener is required. It provides a direct replacement to restore proper fit and alignment for panels, brackets, and internal assemblies. What it does

• Fastens small components and brackets in appliance assemblies using an M4 thread and 16 mm length
• Replaces worn, missing, or stripped screws that cause loose panels or rattling
• Helps maintain proper alignment to prevent vibration and intermittent contact
• Suitable where a standard M4 x 16 mm machine screw is specified by the manufacturer

• One M4 x 16 mm screw

• Disconnect power and follow manufacturer safety instructions before servicing
• Use the correct driver to avoid stripping the head; turn until snug but avoid overtightening
• Inspect mating threads and replace if damaged; use thread-lock if originally specified
• If the original screw used a washer or special head, verify fit before final assembly

This felt gasket assembly cushions and seals the dryer drum edge to reduce rubbing, keep fabric from catching, and help direct airflow. It restores smoother drum rotation and reduces noise caused by worn or torn felt. What it does:

• Provides a soft seal between the drum and bulkhead to prevent garments from catching on the drum edge
• Dampens vibration and reduces scraping or squeaking noises from drum contact
• Helps maintain proper airflow path and keeps lint out of the gap near the drum
• Common signs you need it: visible wear or fraying, fabric snags at the drum opening, or increased noise during rotation

• Disconnect power (and gas if applicable) before starting any repair
• Remove the dryer front or drum to access the gasket location
• Inspect adjacent seals, drum rollers, and the bulkhead for wear while replacing the felt
• Use OEM replacement and follow torque/fastening points for reassembly