Dcv660eh0bb Parts

This SCR cover-back is a replacement cover that protects the appliance's SCR module and wiring, helping prevent contact damage and debris buildup for reliable operation. It restores the original protective shielding. What it does

• Protects the SCR module, control board area, and wiring from physical damage and dirt
• Helps reduce risk of electrical shorting from loose debris or accidental contact
• Maintains factory routing and placement of components behind the control area
• Restores the appliance's original protective enclosure after service

• One SCR cover-back replacement panel

• Designed to fasten using the original screws or mounting hardware; all retained hardware is present
• Disconnect power before servicing to avoid shock or damage to electronic components
• Handle with care to avoid bending mounting tabs; align tabs before tightening screws
• If control boards or modules were removed for access, recheck connections before reapplying power

This rubber mounting pad cushions and isolates appliance components to reduce vibration and noise, helping parts sit securely and run quieter. A simple replacement for worn or damaged pads that lets the appliance operate more smoothly. What it does:

• Acts as a vibration damper to reduce noise and movement during operation
• Provides a stable cushion between metal parts or between appliance and mounting surface
• Helps prevent rubbing, rattling or premature wear caused by metal-on-metal contact
• Commonly replaced when pads are cracked, compressed, missing or deteriorated

• Disconnect power and, if applicable, water supply before accessing internal components
• Inspect mounting area and clean surfaces before installing the new pad
• Press or fit the pad into place; no special tools typically required
• If multiple pads on the same assembly are worn, replace them together for even support

This valve elbow redirects the appliance's water line to the inlet valve, providing a secure 90° connection to help prevent kinks and ensure consistent water flow. Simple, compact replacement for a worn or damaged elbow. What it does

• Redirects the water supply line to the appliance inlet valve for a neat, low-profile connection
• Helps prevent kinking or strain at the inlet connection that can lead to leaks
• Restores proper water routing when the original elbow is cracked, broken, or leaking
• Resolves symptoms such as visible leaks at the valve connection or reduced/disrupted water flow to dispensers or ice makers

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line before removing the old elbow to minimize spills
• Inspect the inlet fittings and water line for damage; replace any worn tubing or gaskets
• Use appropriate tools and replacement gaskets; hand-tighten fittings and check for leaks after restoring water

This door gasket is the flexible rubber seal that mounts around the refrigerator door to maintain an airtight seal, helping preserve internal temperatures and reduce energy loss from leaks. What it does:

• Seals the gap between the refrigerator door and cabinet to keep cold air inside.
• Prevents moisture intrusion, reducing frost, condensation, and excessive compressor run time.
• Restores proper door contact when original gasket is cracked, torn, warped, or no longer seals.
• Common symptoms: visible gaps, light showing around closed door, frost buildup, or higher-than-normal interior temperatures.

• Disconnect power to the appliance before beginning any work.
• Remove the old gasket and clean the door channel; inspect the mounting surface for damage.
• Press the new gasket into the channel starting at the corners, working around the door for an even fit; warm the gasket slightly (hair dryer on low) if needed to help seat it.
• Avoid sharp tools that can tear the gasket.

This motor and blower assembly moves air through the dryer to remove moisture and allow proper airflow. Replacing a worn or damaged assembly restores airflow and reduces drying time and overheating risk. What it does:

• Spins the blower wheel to circulate air through the drum and vent system
• Restores normal airflow when a failing motor or damaged blower causes weak or no air movement
• Reduces unusual noise caused by worn bearings, loose blower wheel, or motor issues
• Helps prevent overheating from restricted or insufficient airflow

• Disconnect power before servicing; this part requires access to the dryer cabinet
• Inspect wiring, mounting hardware, and venting while replacing the assembly

This handle tapping screw secures an appliance's handle to its door or front panel. Replacing a missing or stripped screw restores a firm, safe grip and prevents a loose or rattling handle. What it does:

• Fastens the handle to the door or front panel
• Self-tapping design engages/cuts threads for a secure hold
• Replaces missing, rusted, or stripped handle screws
• Helps correct a loose, wobbly, or rattling handle

• One handle tapping screw

• Disconnect power before service; for gas ranges, also shut off gas
• Support the handle while removing/installing screws to avoid stressing glass or trim
• Start the screw by hand to avoid cross-threading; tighten snugly without overtightening
• Keep track of any decorative end caps or spacers for reassembly

This screw back housing is a rear housing piece that holds and aligns screws and fasteners on the appliance's rear panel, helping maintain proper panel fit and component placement for safe, quiet operation. What it does:

• Secures rear-panel screws and fasteners to keep the back panel stable and aligned
• Supports adjacent components to prevent rubbing, vibration, or rattling noises
• Restores proper panel fit that can affect airflow or clearance around internal parts
• Helps prevent loose or misaligned panels that could expose wiring or components

• Always disconnect power before attempting any repair.
• Remove the rear access panel and keep track of screws and fasteners; note orientation before removing the old housing.
• Replace with the exact OEM part and reuse correct screws; do not overtighten to avoid stripping the housing.
• If adjacent clips or fasteners are damaged, inspect and replace them to ensure a secure fit.

This Nut-Strip Door Guide secures the door guide/strip to the appliance, helping keep the door aligned and operating smoothly. Replace a worn or missing nut to restore proper fit and prevent the guide from loosening. What it does

• Fastens the door guide/strip to the appliance frame or door
• Keeps the door guide stable to maintain proper door alignment
• Helps prevent the guide or trim strip from shifting or falling off
• Commonly replaced when the guide is loose, missing, or stripped

• Disconnect power to the appliance before beginning any repair.
• Use appropriate hand tools (screwdriver/socket) and avoid over-tightening to prevent damage.
• Inspect the door guide/strip and surrounding fasteners; replace any damaged parts for proper fit.

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function