Dcv660eh0bb Parts

A replacement control knob assembly that restores safe, positive control of your appliance's settings. Replaces a cracked, stripped, loose, or missing knob so you can select functions and settings reliably. What it does:

• Provides a secure grip and smooth rotation for selecting temperature or function settings
• Replaces knobs that are cracked, worn, stripped, loose, or missing
• Restores proper control engagement when the original will not turn or won't stay set
• Matches OEM fit and mounting for a straightforward swap

• Always disconnect power to the appliance before starting any repair
• Most installations are push-on: remove the old knob by pulling straight off, then push the replacement onto the control shaft until fully seated
• If the knob is tight or stuck, gently wiggle while pulling; avoid prying on surrounding surfaces

This replacement filter cover restores the water-filter access door so the filter stays secured and the filter bay stays sealed for reliable water flow and easy filter changes. It's a direct-fit service part for compatible GE refrigerators. What it does:

• Secures the water filter in its housing so the cartridge stays seated during operation
• Helps keep the filter compartment sealed against dust and debris
• Prevents the filter from falling out or shifting while the fridge door is opened and closed
• Reduces the chance of water seepage around the filter area when properly installed

• Turn off the refrigerator's water supply and open the fridge door before replacing the cover.
• Remove the old cover by unlatching or pulling as required, then snap or slide the new cover into place until it latches.
• Inspect the filter seal and seating; replace the water filter if damaged or worn.

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

This door strike attaches to the dryer door and engages the cabinet catch and door switch so the door latches securely and the dryer can run. Replace a worn or broken strike to restore reliable door closure.

• Mounts on the dryer door; provides the latch post that inserts into the cabinet catch
• Activates the door switch when closed to allow the cycle to start
• Common symptoms: door won't latch or pops open during use
• Dryer won't start unless the door is held shut; visible cracks or a missing strike

• Disconnect power before servicing
• Open the door and remove the existing strike from its mounting location
• Position the new strike in the same orientation and secure it as originally installed
• Close the door and test operation

This idler spring secures and tensions the dryer drum/idler assembly to maintain proper belt alignment and drum rotation. Replacing a worn or broken idler spring restores correct tension for smooth, consistent drying performance. What it does:

• Applies tension to the idler pulley to keep the drive belt tight and aligned.
• Helps prevent the belt from slipping, dragging, or coming off the drum.
• Reduces unusual squeaks, rubbing noises, and irregular drum movement caused by a failed spring.
• Works as part of the idler/drive assembly that ensures even drum rotation.

• Disconnect power (and gas if applicable) before starting any repair.
• Inspect the idler pulley, belt, and mounting hardware while replacing the spring; replace any visibly damaged parts.
• Use caution when releasing or installing tensioned components to avoid pinch injuries.

This spring filter cover replaces the worn or broken cover that secures the filter spring and housing, helping ensure the filter stays seated and the dispenser/filtration system operates reliably. Simple replacement restores proper filter retention. What it does:

• Secures the filter spring and holds the filter assembly in place
• Prevents the filter from shifting or dislodging during use
• Helps maintain proper water flow through the filter housing
• Commonly replaces cracked, warped, or missing covers that cause leaks or poor filter fit

• Designed for direct replacement; remove water filter and disconnect power or water supply per your model before starting
• Inspect the spring and housing for damage; replace any worn components to ensure proper function
• Hand-tighten only—avoid overtightening plastic parts to prevent cracking

This inner door sub-assembly is the factory replacement inner panel for the appliance door. It restores the door's inner structure and supports the inner glass and trim for safe, stable operation. What it does

• Replaces a damaged or warped inner door panel that can allow heat/steam to collect between door layers
• Secures and supports inner glass and related trim for proper door alignment
• Reduces rattling or vibration caused by a loose or broken inner door component
• Helps restore a proper seal and consistent cooking/heating performance when the inner panel is compromised

• One inner door sub-assembly

• Disconnect power (and gas, if applicable) before beginning any repair; ensure appliance is cool
• Handle glass and sharp edges carefully; wear gloves and eye protection
• Follow the OEM service manual for disassembly/reassembly steps and recommended fasteners

This bracket gasket felt is a thin felt cushioning strip that mounts to a bracket or cabinet to reduce metal-on-metal contact and quiet vibration. It helps protect finishes and prevents rattles where parts meet. What it does

• Cushions contact between a bracket and cabinet or other metal parts to reduce noise and wear
• Helps prevent scratching and scuffing on mating surfaces
• Reduces vibration-driven rattles around the bracket area
• Simple, passive part with no electrical function

• Disconnect power to the appliance before beginning any work when applicable.
• Remove the bracket or access panel to expose the mounting area; replace the old felt with the new strip in the same position.
• Press the felt into place; secure using the original fasteners or adhesive method used by the manufacturer.
• Wear gloves to protect hands from sharp edges.

This exhaust duct channels cooking exhaust from the appliance to the home vent system, restoring proper airflow and helping reduce smoke, steam and cooking odors in the kitchen. What it does:

• Directs exhaust air from the appliance to the venting system to maintain proper airflow.
• Helps reduce cooking smoke, steam and odors by providing a clear path to the outside.
• Prevents moisture buildup and improves ventilation performance when intact and properly installed.
• Worn, crushed or disconnected ducts can cause weak exhaust, lingering odors, excess steam or increased noise.

• Disconnect power to the appliance and follow all safety and grounding instructions before servicing.
• Use basic hand tools and gloves; avoid sharp edges on metal ducting.
• Do not modify the part; if replacement requires changes to venting, refer to the appliance manual.