Ddt575sgfoww Parts

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

This silverware basket assembly sits in the lower rack to organize and secure flatware during the wash cycle, promoting thorough cleaning while keeping small items from slipping loose and potentially causing noise or damage.

• Holds and separates utensils in the lower rack for better spray coverage
• Replaces a cracked, warped, damaged, or missing basket
• Helps prevent utensils from falling through and obstructing moving parts
• Common signs it's needed: broken/missing sections, sharp edges, utensils not staying upright or falling out

• No tools required; pull out the lower rack to access the basket
• Lift out the old basket and place the new one in the same position
• Ensure the basket sits flat and does not interfere with the lower spray arm
• Let the dishwasher cool before handling near the lower rack or heater

This wiring harness assembly connects DC-powered components to the appliance's control system, restoring reliable electrical and signal paths for proper operation. It replaces a damaged or worn harness so circuits can function safely. What it does:

• Routes power and signal connections between the control board and DC-driven components
• Provides secure, keyed connectors to prevent mis-mating and intermittent contacts
• Helps stop failures caused by frayed wires, broken terminals, or melted insulation
• Common symptom fixes: appliance won't start or runs intermittently, loss of motor power, or electrical error codes

• Disconnect power to the appliance before beginning any service
• Inspect connectors and wire routing; replace if insulation or terminals are damaged
• Route and secure the harness per OEM routing to avoid heat and abrasion

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This console bezel and cover assembly replaces the outer trim that surrounds and protects the appliance control console, restoring a finished appearance and shielding controls from dust and damage. Fits as a direct-replacement console trim piece. What it does:

• Replaces cracked, warped or damaged console trim that exposes controls or electronics
• Protects buttons, display and wiring from spills and debris
• Restores the appliance's original look after impact or wear
• Keeps control components aligned and properly sealed from the front

• One console bezel and cover assembly

• Disconnect power before starting any repair to avoid shock or injury
• Remove appropriate panels and fasteners to access the console per your model's service instructions
• Handle plastic tabs carefully — align tabs and clips, then secure with screws as required
• Transfer controls, switches or knobs from the old bezel as needed

This bezel and console cover assembly replaces a damaged or worn front console on compatible GE appliances, restoring the control area's appearance and protecting the underlying switches and electronics. Ideal for cosmetic repair or after impact damage. What it does:

• Replaces the front console bezel and cover to restore the appliance's control-area appearance
• Protects control switches, buttons, and display openings from dust and impact
• Helps prevent moisture and debris from reaching internal control components
• Commonly used when the console is cracked, bent, or cosmetically worn

• One bezel and console cover assembly as shown

• High-level replacement—remove power before starting
• May require removing trim, consoles, or control components; keep screws and small parts organized
• Wear gloves to avoid cuts on sharp edges and protect internal wiring/connectors during reassembly

This shield wash pump circulates dishwasher wash water so dishes get cleaned and rinsed effectively. Replaces a failed or noisy pump to restore normal wash performance and water movement inside the tub. What it does:

• Circulates wash and rinse water through the spray arms for proper cleaning and rinsing
• Helps maintain consistent water flow and pressure during the wash cycle
• Reduces loud noise or grinding when a worn pump or motor is replaced
• Commonly replaced when the dishwasher pauses mid-cycle, won't complete cycles, or leaks from the pump area

• One complete shield wash pump assembly (pump with motor and mounting shield as shown)

• Recommended for users comfortable with appliance disassembly; disconnect power and water before starting
• Inspect seals and mounting gaskets and replace if worn to prevent leaks
• Tighten hose clamps and check hose routing during reassembly to avoid kinks or stress

This is a replacement upper rack for your dishwasher that holds cups, glasses, and small dishes while allowing proper spray coverage for cleaning. It restores secure top-rack loading and proper item spacing. What it does:

• Supports cups, glasses, bowls and other top-rack items for normal wash cycles
• Keeps items elevated for even water and detergent distribution
• Replaces bent, cracked, or rusted racks that allow dishes to shift or block spray arms
• Works with existing upper-rack slides and rollers when components are intact

• Disconnect power to the dishwasher and open the door fully before beginning
• Remove dishes and slide the old upper rack out along its rails; lift out per your model's rail release method
• Position the new rack on the rails and verify smooth forward/back travel; reinstall any retaining clips or stops
• If rollers, rails, or clips are damaged, replace those parts as needed for proper operation

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.