Ddt57ssf7ss Parts

This bezel and console cover assembly replaces a damaged or worn front console on compatible GE appliances, restoring the control area's appearance and protecting the underlying switches and electronics. Ideal for cosmetic repair or after impact damage. What it does:

• Replaces the front console bezel and cover to restore the appliance's control-area appearance
• Protects control switches, buttons, and display openings from dust and impact
• Helps prevent moisture and debris from reaching internal control components
• Commonly used when the console is cracked, bent, or cosmetically worn

• One bezel and console cover assembly as shown

• High-level replacement—remove power before starting
• May require removing trim, consoles, or control components; keep screws and small parts organized
• Wear gloves to avoid cuts on sharp edges and protect internal wiring/connectors during reassembly

This shield wash pump circulates dishwasher wash water so dishes get cleaned and rinsed effectively. Replaces a failed or noisy pump to restore normal wash performance and water movement inside the tub. What it does:

• Circulates wash and rinse water through the spray arms for proper cleaning and rinsing
• Helps maintain consistent water flow and pressure during the wash cycle
• Reduces loud noise or grinding when a worn pump or motor is replaced
• Commonly replaced when the dishwasher pauses mid-cycle, won't complete cycles, or leaks from the pump area

• One complete shield wash pump assembly (pump with motor and mounting shield as shown)

• Recommended for users comfortable with appliance disassembly; disconnect power and water before starting
• Inspect seals and mounting gaskets and replace if worn to prevent leaks
• Tighten hose clamps and check hose routing during reassembly to avoid kinks or stress

This is a replacement upper rack for your dishwasher that holds cups, glasses, and small dishes while allowing proper spray coverage for cleaning. It restores secure top-rack loading and proper item spacing. What it does:

• Supports cups, glasses, bowls and other top-rack items for normal wash cycles
• Keeps items elevated for even water and detergent distribution
• Replaces bent, cracked, or rusted racks that allow dishes to shift or block spray arms
• Works with existing upper-rack slides and rollers when components are intact

• Disconnect power to the dishwasher and open the door fully before beginning
• Remove dishes and slide the old upper rack out along its rails; lift out per your model's rail release method
• Position the new rack on the rails and verify smooth forward/back travel; reinstall any retaining clips or stops
• If rollers, rails, or clips are damaged, replace those parts as needed for proper operation

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This front tub spacer cushions and positions the washer tub to reduce vibration and keep the inner and outer tubs properly aligned during operation. It helps maintain smooth spin cycles and prevents metal-to-metal contact. What it does:

• Centers and supports the front of the washer tub to maintain proper drum alignment
• Absorbs movement to reduce vibration and noise during spin
• Prevents rubbing or contact between the tub and cabinet components
• Can be associated with symptoms like excessive vibration, rubbing sounds, or off-center spins

• Designed for direct replacement; inspect surrounding seals and mounts during service
• Use basic hand tools; follow the washer's service manual for safe disassembly and reassembly
• Disconnect power and water supply before beginning any repair

This Button and Graphic Assembly replaces a worn or damaged control-panel button and its printed overlay so controls are readable and easy to press. It restores the button surface and visible markings for normal user operation. What it does:

• Replaces a single control-panel button and the printed graphic/overlay
• Restores legible markings and tactile button feel
• Helps resolve faded, scratched, or peeling button graphics
• Addresses buttons that stick or feel unresponsive due to worn front-surface parts

• Disconnect the appliance from power before servicing to avoid shock
• Remove any required trim or fascia carefully to access the button assembly
• Align the new assembly and press or secure per the original mounting—do not force

This tub top trim replaces the decorative/top trim that surrounds the washer tub opening to restore a finished look and help keep the inner tub sealed from the cabinet. It's a direct-fit exterior trim piece for top-load washers. What it does

• Replaces damaged, cracked, or warped tub top trim that lets water spray toward the cabinet
• Restores the washer's finished appearance around the tub opening
• Helps keep the tub's edge covered to reduce splash and debris entry
• Useful when the original trim is loose, bent, or cosmetically worn

• One tub top trim piece as shown

• Turn off power and water to the washer before beginning any service
• May require removing the cabinet or control console depending on model; follow the OEM service instructions
• Use proper fasteners and gaskets from the OEM parts list if required; only install what is included

This button and graphic assembly replaces a worn or damaged control panel button and its overlay graphic to restore clear tactile feedback and readable markings for cycle selection and settings. It fits into the appliance's console for direct user control. What it does:

• Replaces a damaged or faded control panel button and the printed graphic overlay
• Restores readable labels for accurate selection of cycles and options
• Helps resolve issues where a button is loose, missing, or visually worn
• Works with the console's existing switch contacts to transmit user commands

• One button and graphic assembly as shown

• Remove power to the appliance before attempting any service
• Installation typically requires removing the console trim to access the button assembly
• Handle the graphic overlay carefully to avoid creasing or smudging printed markings
• If you encounter damaged mounting clips or internal switches, replace those parts as needed

This friction washer is a small spacer that helps reduce metal-on-metal contact and keeps rotating parts aligned for smooth operation. It prevents excess wear and helps reduce noise from rubbing or binding components. What it does:

• Acts as a low-friction spacer between rotating parts to minimize wear and friction
• Keeps shafts, drums, or pulleys positioned correctly to maintain smooth rotation
• Helps reduce rubbing noises, squeaks, or binding caused by worn or missing washers
• Supports long-term component life by preventing direct metal-to-metal contact

• Disconnect power to the appliance before beginning any repair
• Inspect mating surfaces and replace any damaged bearings, seals, or fasteners
• Install with the same orientation as the original part; do not force into place
• Use the exact part number when ordering replacements to ensure proper fit

This 10-18 x 5/8 screw secures panels and components on compatible appliances, restoring proper fit and preventing rattles or loose parts. It's a direct-fit fastener used where the OEM called for a #10-18 thread, 5/8" length screw. What it does

• Fastens trim, panels, brackets, and internal components to restore secure fit
• Stops vibration-related rattling or shifting caused by missing or loose screws
• Matches OEM thread and length to ensure proper engagement and alignment
• Used wherever a #10-18 x 5/8 machine/tap screw is specified in the parts list

• One screw (10-18 x 5/8)

• Disconnect power before working on the appliance and follow all safety precautions
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace any stripped or damaged mating threads or hardware for a secure repair

This shelf cup is a small plastic support that holds and stabilizes a refrigerator shelf. It restores proper shelf alignment and prevents the shelf from sliding or tipping, keeping stored items secure and level. What it does:

• Supports the front or rear edge of a refrigerator shelf to maintain even weight distribution
• Keeps glass and wire shelves seated correctly to prevent shifting or slippage
• Helps eliminate rocking, sagging, or uneven shelves that can cause items to spill
• Compatible with common shelf track designs used in many GE refrigerators

• One shelf cup

• Remove food and shelves from the area before replacing the cup to avoid damage
• Typically snaps into a track or mounting slot; press firmly until it clicks into place
• Inspect mating track or clip for damage and replace if worn to ensure a secure fit