Ddt95ssjoss Parts

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

This tub-mount sleeve is a replacement mounting sleeve that helps secure the washer tub and reduce wear where the tub attaches to the cabinet. Restores proper alignment and helps prevent rubbing or noise from a worn mount area. What it does:

• Provides a durable bearing surface where the tub mounts to the washer cabinet
• Helps keep the tub properly centered to reduce rubbing, vibration, and related noise
• Replaces worn or damaged sleeve surfaces that can cause tub movement or abrasion
• Commonly used when tub mounting points show visible wear or the tub shifts during cycles

• One tub-mount sleeve

• Turn off and unplug the appliance and shut off the water supply before beginning any repair
• Inspect surrounding mounts, seals, and fasteners; replace any additional damaged components as needed
• Use appropriate tools and follow OEM disassembly steps to access and press or slide the sleeve into place

This silverware basket assembly sits in the lower rack to organize and secure flatware during the wash cycle, promoting thorough cleaning while keeping small items from slipping loose and potentially causing noise or damage.

• Holds and separates utensils in the lower rack for better spray coverage
• Replaces a cracked, warped, damaged, or missing basket
• Helps prevent utensils from falling through and obstructing moving parts
• Common signs it's needed: broken/missing sections, sharp edges, utensils not staying upright or falling out

• No tools required; pull out the lower rack to access the basket
• Lift out the old basket and place the new one in the same position
• Ensure the basket sits flat and does not interfere with the lower spray arm
• Let the dishwasher cool before handling near the lower rack or heater

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This wiring harness assembly connects DC-powered components to the appliance's control system, restoring reliable electrical and signal paths for proper operation. It replaces a damaged or worn harness so circuits can function safely. What it does:

• Routes power and signal connections between the control board and DC-driven components
• Provides secure, keyed connectors to prevent mis-mating and intermittent contacts
• Helps stop failures caused by frayed wires, broken terminals, or melted insulation
• Common symptom fixes: appliance won't start or runs intermittently, loss of motor power, or electrical error codes

• Disconnect power to the appliance before beginning any service
• Inspect connectors and wire routing; replace if insulation or terminals are damaged
• Route and secure the harness per OEM routing to avoid heat and abrasion

The Outer Door Assembly Kit is an OEM replacement part for GE dishwashers. It includes all of the key external door components needed for proper function, including the inner and outer door panels, sealing gaskets, locking mechanisms, and design elements. 

Causes of a bad outer door assembly can include wear and tear over time, especially to sealing gaskets which are prone to cracking. Higher humidity levels can accelerate this. Physical damage such as dents or cracks in the plastic panels will also necessitate replacement.

Symptoms of a bad outer door assembly include:

• Water leaks into the interior due to compromised seals 
• Difficulty closing and locking the door securely
• Gaskets that no longer create an airtight seal around the door perimeter
• Loose, sagging, or damaged door panels

This replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This harness assembly routes AC power and control signals between components to restore electrical connectivity and reliable operation. Replaces a damaged or burned wiring harness to help eliminate intermittent power, no-start, or control faults. What it does:

• Provides the factory wiring connections for AC power and control circuits
• Replaces frayed, burnt, or disconnected wires that cause intermittent operation or no power
• Restores proper connector fit to ensure secure electrical contact
• Helps address symptoms such as appliance not starting, sporadic operation, or blown fuses/circuit breakers

• Disconnect power before servicing to avoid electrical shock
• Inspect connectors and mounting points; secure harness away from sharp edges and heat sources
• Match connector shapes and pin counts; do not force connectors together

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This console bezel and cover assembly replaces the outer trim that surrounds and protects the appliance control console, restoring a finished appearance and shielding controls from dust and damage. Fits as a direct-replacement console trim piece. What it does:

• Replaces cracked, warped or damaged console trim that exposes controls or electronics
• Protects buttons, display and wiring from spills and debris
• Restores the appliance's original look after impact or wear
• Keeps control components aligned and properly sealed from the front

• One console bezel and cover assembly

• Disconnect power before starting any repair to avoid shock or injury
• Remove appropriate panels and fasteners to access the console per your model's service instructions
• Handle plastic tabs carefully — align tabs and clips, then secure with screws as required
• Transfer controls, switches or knobs from the old bezel as needed

This bezel and console cover assembly replaces a damaged or worn front console on compatible GE appliances, restoring the control area's appearance and protecting the underlying switches and electronics. Ideal for cosmetic repair or after impact damage. What it does:

• Replaces the front console bezel and cover to restore the appliance's control-area appearance
• Protects control switches, buttons, and display openings from dust and impact
• Helps prevent moisture and debris from reaching internal control components
• Commonly used when the console is cracked, bent, or cosmetically worn

• One bezel and console cover assembly as shown

• High-level replacement—remove power before starting
• May require removing trim, consoles, or control components; keep screws and small parts organized
• Wear gloves to avoid cuts on sharp edges and protect internal wiring/connectors during reassembly