Dfe28jmkfes Serial Parts

The Striker Light Switch is an OEM component specifically designed for GE refrigerators. Located on the refrigerator door, it controls interior lighting functions.

Causes of a bad switch can include wear from opening the door frequently or water damage over time.

Symptoms of a failed switch include: 

• Lights not turning on when the door is opened  
• Lights remain illuminated all the time even when closed
• Flickering or unresponsive lighting behavior

This switch utilizes a striker plate activation mechanism that triggers interior lights based on door position - open or closed. A replacement ensures lighting convenience and energy efficiency. 

This genuine OEM GE part restores dependable on/off lighting control through the normal door operation process. Compatible with additional brands including Hotpoint, RCA, or Kenmore models.

The Icemaker Fill Tube Heater is an OEM component specifically designed for GE refrigerators. Located near the icemaker assembly, this heating element plays a crucial supporting role.

Symptoms of a bad fill tube heater include:

• Irregular or inconsistent ice production amounts  
• Cracked, cloudy or malformed ice cubes being generated
• The icemaker failing to operate or stop working altogether
• Water or moisture around the refrigerator icemaker area 

Causes can include wear over time from powering on during each ice-making cycle. Mineral deposits may also form and insulate the heating surface, reducing effectiveness.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

This bar reinforcement is a replacement support brace that restores strength and alignment to the appliance trim or door assembly. It helps secure panels and prevents sagging or flexing for reliable everyday use. What it does:

• Provides structural support for the door or trim assembly to reduce flex and maintain alignment
• Restores a loose or sagging panel to proper position
• Helps keep connected components stable during normal operation
• Designed to fit into the original mounting points and distribute load where the factory part did

• Follow the appliance manufacturer's service manual for disassembly and reassembly steps
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power (or gas, if applicable) and remove food/contents from working area before starting

The Refrigerator Slide Lower Freezer is an OEM replacement part for GE refrigerators. It is a sliding component designed to facilitate smooth and effortless access to the lower freezer compartment. This OEM part ensures that the lower freezer drawer can glide in and out seamlessly, allowing for convenient storage and retrieval of frozen items.

Symptoms of a bad Refrigerator Slide Lower Freezer include:

• Difficulty opening or closing the lower freezer drawer
• Freezer drawer catching or sticking during operation
• Noisy or grinding sounds when sliding the drawer
• Drawer not staying in position when opened or closed

Causes of a bad lower freezer slide can include wear and tear from repeated use, damage from mishandling or overloading, or issues with the slide mechanism itself. Over time, the slides may become worn, misaligned, or obstructed, leading to operational problems.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

This evaporator block seal is a refrigerator freezer gasket that helps seal the evaporator assembly to limit air and moisture migration, reducing frost buildup and helping the cooling system run efficiently. What it does:

• Seals the evaporator block area to prevent moist air from reaching cold surfaces
• Helps reduce frost and ice accumulation on the evaporator and evaporator cover
• Supports consistent cooling by maintaining the intended airflow path
• Can reduce defrost frequency when the original seal is damaged or worn

• 1 evaporator block seal

• Disconnect power to the appliance before starting any repair
• Replacement typically requires removing the evaporator cover or assembly; handle evaporator fins and components carefully
• Inspect surrounding foam, clips, or adhesive; replace or resecure as needed to ensure a proper seal
• After installation, restore power and verify proper cooling and defrost operation

This left-side hinge top pin assembly secures the refrigerator door to the cabinet hinge, restoring proper alignment and smoother door movement. Use it to replace a worn or damaged top hinge pin for improved closing and reduced door sag. What it does:

• Secures the door at the cabinet top and provides the pivot point for opening and closing
• Replaces worn or bent pins that can cause door sag, misalignment, or rubbing
• Helps the door close more evenly and maintain a consistent seal
• Works with the existing hinge components to restore smooth hinge action

• Disconnect power to the appliance and remove stored items from the door before starting
• Support the door while removing and installing hinge parts to prevent dropping or damage
• Basic hand tools are typically required; follow the appliance manufacturer's service instructions
• Replace all affected components for a secure fit

This evaporator cover houses and protects the freezer evaporator coil while directing airflow for even cooling and helping limit frost buildup. It restores proper airflow routing behind the freezer liner for consistent temperature control. What it does:

• Protects the evaporator coil from contact and debris
• Guides cold air from the evaporator into the freezer compartment
• Helps reduce localized frost accumulation on the coil and liner
• Can address symptoms like poor/freezer cooling, uneven temperatures, or increased frost/icing

• One evaporator cover (housing) as shown

• Disconnect power before beginning any repair
• Remove interior panels and shelves per your model's service instructions to access the evaporator area
• Handle carefully to avoid damaging the cover tabs, mounting points, or nearby wiring/insulation
• After installation, reassemble panels and verify proper fan operation and normal cooling

This selector control provides the hi/lo switching function for the oven/range heating circuit, restoring user control over high and low heat settings. It replaces a failed selector so the range can select the proper heat level reliably. What it does:

• Switches between high and low heat settings for the heating element or burner
• Restores control when heat setting changes do not respond or stick
• Helps eliminate intermittent or no-heat conditions caused by a worn selector
• Matches OEM function and mounting for a direct replacement

• One selector control assembly as shown

• Disconnect power to the appliance before starting any repair
• Handle electrical connections carefully; note wire locations or take a photo before removal
• Use basic hand tools; do not force connectors or mounting tabs

This replacement filter cover houses the filter's RFID tag and secures the cartridge in the refrigerator's filter compartment, restoring proper seating and allowing the dispenser/monitoring system to detect the filter. What it does:

• Protects and secures the water filter cartridge in the filter housing
• Houses the RFID/tag sensor so the appliance can recognize the installed filter
• Helps ensure a proper seal and correct filter seating
• Commonly replaced when the cover is cracked, broken, missing, or the filter won't stay in place
• Resolves filter-detection or filter-status errors when the cover or RFID is damaged

• Remove the filter cartridge before replacing the cover; follow the refrigerator owner's manual for proper removal
• Inspect the filter and housing for damage or debris before installing the new cover
• Align and snap the cover into place until it seats securely; the filter status light resets per the appliance instructions

This discharge jumper connects the compressor discharge circuit to the refrigerator's wiring harness, restoring a secure electrical path for proper compressor operation. It replaces damaged or corroded discharge jumpers to help resolve related electrical faults. What it does:

• Provides a reliable electrical connection at the compressor discharge terminal
• Restores continuity when the original jumper is cracked, corroded, or broken
• Helps address symptoms such as compressor failing to start, intermittent cooling, or electrical arcing at the terminal
• Protects the compressor wiring from loose connections that can cause overheating

• Disconnect power to the appliance before accessing the compressor or wiring
• Access typically requires removing the rear service panel; avoid contact with refrigerant lines
• Ensure terminals are clean and securely fastened to the compressor before finalizing installation