Dfe29jdass Parts

This silicon controlled rectifier (SCR) is a replacement power-switching semiconductor that helps control high-current flow to heating elements or motors, restoring proper power regulation and appliance function. What it does:

• Acts as a high-current electronic switch on appliance control circuits to regulate power to heating elements, motors, or similar loads
• Allows the control board to turn high-voltage circuits on and off with low-voltage signals
• Failure can cause no heat, intermittent heating, loss of power to a controlled component, or erratic operation
• Designed to handle repeated switching cycles under normal appliance operating conditions

• One silicon controlled rectifier module

• Disconnect all power before servicing to avoid shock or injury
• Handle as an electronic component; avoid static discharge and mechanical stress
• May require soldering or secure mounting to a heatsink or chassis—follow the appliance wiring diagram

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This replacement lever restores a worn or broken control surface so the dispenser or interior mechanism operates smoothly. It fits into the original pivot and offers a quick, affordable way to regain normal function. What it does:

• Acts as the pivoting control that engages the dispenser or internal latch
• Replaces cracked, bent or worn levers that prevent proper operation
• Helps stop sticking, loose movement, or failure to engage when pressed
• Restores reliable feel and alignment for normal user operation

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove access panels or trim carefully; keep fasteners for reassembly
• May require a screwdriver or nut driver to remove retained clips or screws

A replacement round control knob that restores safe, reliable control of cooktop or oven functions. Fits standard push-on valve/stem designs to replace cracked, loose, or missing knobs and make setting temperatures intuitive again. What it does:

• Replaces a worn, cracked, stripped, or missing control knob so you can accurately set heat and function
• Push-on design engages the range/oven control stem for smooth rotation and selection
• Improves user safety and usability by restoring a secure grip and clear pointer alignment
• Works for common push-on valve/stem applications on ranges and ovens

• One replacement control knob

• Disconnect power (or turn gas off) and allow appliance to cool before replacing knobs
• Pull off the old knob straight from the control stem and push the new knob fully onto the stem until it seats
• Inspect the control stem for damage; do not force a knob onto a broken or bent stem

This gasket seals the meat pan to help contain juices and maintain proper cooling inside the refrigerator drawer. It replaces a worn or torn seal to reduce leaks and help the pan sit securely. What it does:

• Provides a snug seal around the meat pan to help contain drips and spills
• Helps maintain a consistent drawer environment by limiting air exchange
• Reduces odors and moisture transfer from the meat pan to the cabinet
• Commonly replaced when cracked, deformed, or no longer sealing properly

• Inspect the pan and surrounding channel for damage or debris before installing
• Remove the old gasket and clean the mounting surface to ensure a proper seal
• Press the new gasket into place evenly around the pan; some warming of the gasket can aid flexibility

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

This LED jumper harness connects LED lights and lighting assemblies to the fridge's wiring, restoring reliable power and signal to LED circuits. It's a direct-replacement wiring jumper for lighting systems that need a damaged or worn harness replaced. What it does:

• Transfers power and signal between LED modules and the appliance wiring harness
• Replaces damaged, frayed, or corroded jumper wiring that can cause flickering or loss of light
• Helps restore consistent interior or dispenser lighting when the LED circuit is interrupted
• Maintains OEM routing for correct fit and connector alignment

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle connectors carefully; align and seat plugs fully but avoid excessive force.
• Route the harness away from sharp edges, hinges, and moving parts; secure with existing clips or ties.

This personality harness is the OEM-style wiring assembly that links the refrigerator control board to sensors, switches and other components so the control can communicate and operate the appliance reliably. What it does:

• Routes signals between the main control board and connected components (sensors, switches, valves, lights)
• Restores proper control communication when a damaged harness causes intermittent or no operation
• Helps resolve symptoms such as unresponsive controls, intermittent component operation, or error/diagnostic faults tied to wiring
• Provides the correct connectors and color-coded wires to match the original factory harness

• Disconnect power to the appliance before inspecting or replacing the harness
• Handle connectors gently and match keyed plugs to their mating sockets; do not force
• Route and secure the harness away from sharp edges, moving parts and heat sources

This harness jumper connects high-side wiring to restore power continuity to a refrigerator's high-side circuit. It replaces a damaged or broken jumper so high-side components can receive reliable power and resume normal operation. What it does:

• Provides a direct electrical connection for the high-side circuit where the original jumper is damaged
• Restores power continuity to high-side components that fail due to a broken or corroded jumper
• Helps eliminate intermittent power or connection issues caused by frayed or loose wiring
• Used as a targeted repair to avoid replacing larger wiring assemblies when only the jumper is faulty

• One harness jumper (hi side)

• Disconnect power to the appliance before inspection or replacement to avoid shock or injury
• Verify connector orientation and secure all terminals; avoid forcing connectors together
• Inspect surrounding wiring and terminals for heat or corrosion; replace damaged components as needed

Replacement support brace that reinforces refrigerator door or trim assembly. Restores structural strength and prevents sagging or flexing of panels.

Excess frost in freezer? This evaporator block seal prevents moist air from reaching cold components, reducing frost buildup and improving efficiency.

Ice maker stopped working or making noise? This wiring housing protects ice maker wires from damage in your freezer. Prevents wire chafing issues.

Holds and positions refrigerator drawer or shelf dividers to keep contents separated. Replace this molded plastic stop if cracked, broken, or missing.

Replace your broken, cracked, or discolored freezer drawer front panel. This slate-finish exterior panel restores the appearance of your lower freezer drawer.

Fix loose components or rattling sounds in your refrigerator with this lock washer. Simple 10-minute fix for securing bolts and preventing vibration.

Leveling leg screw assembly for bottom-mount refrigerators. Installs at the base to adjust height and stability. Replace if broken, stripped, or missing.