Dleo332w Parts

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

This multi wiring harness routes power and signals between the main control and multiple appliance components. It restores reliable electrical connections so controls, sensors and motors communicate correctly. What it does:

• Replaces a damaged or frayed multi-connector wiring harness
• Restores power/signal paths to control board, sensors, valves or motors
• Helps resolve intermittent operation, dead components, or failure to start when caused by wiring faults
• Prevents shorts or poor connections from damaged wires or connectors

• Disconnect the appliance from power (unplug or switch off breaker) before installing
• Note connector locations and routing before removal; transfer any wire clips or grommets
• Seat each connector fully and secure the harness along original routing to avoid pinching or heat exposure

This main control board manages the appliance's electronic functions and user interface, restoring control of cycles, sensors, and displays when the original board fails. Replaces a faulty control board to help resolve intermittent operation or unresponsive controls. What it does:

• Receives and interprets input from the console and sensors to run selected cycles
• Sends power and signals to motors, valves, heaters, and compressors as needed
• Helps regulate timing, temperature, and safety interlocks during operation
• Commonly replaced for symptoms such as no display, unresponsive buttons, or erratic operation

• One main control board

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by its edges and avoid touching components or connectors
• Verify connectors and harness locations match before seating the board

The Motor Bracket is an OEM part for LG dryers. This bracket securely holds the dryer motor in place. It maintains proper alignment and spacing of the motor to allow for smooth operation of the tumble cycle.

Causes of a bad motor bracket can include cracks or breaks developed over time from repeated use and vibration, or damage due to impact or improper installation.

Symptoms of a bad motor bracket include:

• Excessive noise or grinding sounds emanating from the motor area
• The dryer not rotating or tumbling clothes properly
• Increased movement or shaking of the motor
• Poor airflow and inefficient drying performance

This OEM LG part is also compatible with some Kenmore models.

This rear support assembly stabilizes the appliance's rear housing and helps keep internal components aligned for smooth operation and reduced vibration. It restores proper rear-end support to prevent rubbing, noise, and uneven motion. What it does:

• Provides a stable mounting point for the appliance's rear section to maintain alignment
• Reduces vibration and rattling caused by a loose or worn rear support
• Helps prevent rubbing, scraping, or grinding noises from misaligned components
• Restores proper fit between the rear housing and moving parts to promote smooth operation

• One rear support assembly

• Disconnect power (and gas if applicable) before beginning any repair
• Access typically requires removing the appliance's rear panel or cabinet; follow OEM service manual steps
• Inspect surrounding mounting hardware and replace any worn fasteners for a secure fit

This upper plate is the replaceable trim/cover that fits inside the top of the microwave cavity to protect internal components and help direct airflow. Replacing a damaged plate restores proper coverage and reduces debris buildup. What it does

• Covers and protects internal microwave components at the top of the cavity
• Helps maintain proper airflow and part alignment inside the oven
• Prevents food and debris from contacting internal wiring and electronics
• Reduces rattling or vibrations caused by a warped or loose plate
• Visible cracks, warping, or burn marks are common signs it needs replacement

• One upper plate as pictured

• Disconnect power at the wall and allow the oven to fully power down before servicing
• Remove fasteners or clips holding the old plate, align tabs, then secure the new plate with the original hardware
• Do not operate the microwave with covers removed; complete the repair

This control panel assembly houses the appliance's user interface and display, letting you select cycles and view status. Replacing a faulty panel restores responsive buttons and accurate on-screen information for normal operation. What it does

• Provides the touchpad/buttons and display used to start cycles and adjust settings
• Sends user commands to the appliance's main control board
• Resolves symptoms like unresponsive buttons, blank or garbled display, or incorrect status indicators
• Restores normal control and readouts when the original panel is damaged or malfunctioning

• Disconnect power (unplug or switch off circuit breaker) before installing
• Handle connectors and ribbon cables gently; avoid bending contacts
• Remove outer panels as needed to access mounting screws and connectors

This hinge bracket secures a refrigerator door hinge assembly to the cabinet, restoring proper door alignment and smooth opening. Replace a damaged or bent bracket to stop sagging, binding, or uneven door gaps. What it does:

• Supports the door hinge, maintaining correct door alignment and seal
• Prevents door sag that can cause gaps, poor cooling, or uneven wear
• Helps stop binding or noisy door operation caused by a cracked or bent bracket
• Works as the mounting point between the hinge and cabinet/frame

• One hinge bracket

• Disconnect power and empty the door before removing hinge components to avoid injury or damage
• Loosen or remove hinge fasteners, support the door while swapping the bracket, then retighten fasteners to secure alignment
• Check door alignment and gasket seal after installation; adjust hinge position as needed
• Use appropriate tools and follow safety precautions; for complex repairs

This switch retainer clip secures a small appliance switch in place so the switch stays aligned and operates correctly. It helps maintain reliable switch contact for normal door or control functions. What it does:

• Holds the door/control switch securely to prevent movement or misalignment
• Helps ensure consistent on/off contact for the related switch
• Can prevent intermittent operation or failure caused by a loose switch
• Small plastic/metal retainer designed for exact OEM fit in the switch assembly

• Disconnect power to the appliance before servicing to avoid electric shock
• Typically installs by snapping or sliding onto the switch or bracket; no special tools usually required
• Inspect surrounding switch and wiring for damage; replace if wiring or switch is compromised

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

This genuine replacement screw secures appliance panels and trim so covers, consoles, and components stay firmly in place for safe, quiet operation. It replaces worn or missing fasteners to restore proper fit and reduce vibration and rattling. What it does:

• Secures control panels, trim pieces, or access panels to the appliance frame
• Keeps panels aligned to prevent gaps and light leaks
• Reduces vibration-related noise from loose panels or components
• Helps maintain safe operation by keeping covers and guards properly attached

• The replacement screw shown/listed

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start the screw by hand to ensure proper thread engagement, then tighten securely but do not overtighten

This duct assembly channels exhaust from the appliance to the home vent, restoring proper airflow and helping reduce lint and moisture buildup. It's a direct-fit replacement for the original ducting on compatible LG units. What it does:

• Directs heated air and moisture from the appliance to the exterior vent
• Replaces damaged, crushed or disconnected ductwork that can restrict airflow
• Helps reduce lint accumulation in the cabinet/vent path when installed and maintained
• Restores a sealed connection between the appliance outlet and household venting

• Disconnect power and unplug the appliance before beginning any repair
• Follow for disassembly and routing; use proper clamps or screws to secure connections
• Inspect connected gaskets, clamps and the external vent path; replace or clean as needed
• Do not operate the appliance with obstructed or damaged venting; clean lint regularly to reduce fire risk