Dlg7051v Parts

The Dryer Drum Baffle is an OEM part for LG dryers. This baffle is attached to the inside of the dryer drum and is designed to help lift and tumble clothes during the drying cycle. 

Causes of a bad dryer drum baffle can include wear and tear from regular use, physical damage from heavy or sharp objects, or becoming loose due to vibration over time. 

Symptoms of a bad dryer drum baffle include:

• Thumping or banging noises during the drying cycle
• Clothes not tumbling properly, leading to uneven drying
• Loose or rattling baffle inside the drum
• Visible damage or breakage on the baffle

This OEM LG part is also compatible with some Kenmore models.

The Gas Burner Valve Assembly is an OEM replacement part for LG gas dryers. It is a component located beneath the gas burner that controls the flow of fuel to ignite and maintain the flame. The valve assembly receives ignition and temperature signals from the dryer's control system to precisely regulate gas levels throughout drying cycles. This gas dryer burner valve includes two solenoid coils.

Causes of a faulty gas valve may involve wear over extended operation, mineral buildup on valve seats, or mechanical issues restricting gas flow at desired levels.

Symptoms of a bad gas burner valve assembly consist of:

• Erratic or inconsistent burner ignition between cycles
• Inability to achieve high heat settings when needed
• Burners not maintaining steady flame patterns
• Potential gas leaks detected around valves or tubing

This OEM LG part is also compatible with some Sears/Kenmore dryers.

This dryer duct assembly channels air from the drum to the blower and exhaust. Replacing a cracked or warped housing restores proper airflow, helps prevent lint bypass, and supports consistent drying performance.

• Directs and seals airflow between the drum and blower housing
• Helps maintain drying efficiency by minimizing leaks and lint bypass
• Damage or warping can lead to long dry times and reduced airflow
• Signs of failure include visible cracks, melted spots, or air/lint leakage around the duct area

• Disconnect power; for gas models, turn off the gas supply
• Access from the front by removing the top and front panel
• Note fastener locations and any attached brackets/harnesses, then transfer them to the new assembly
• Vacuum lint from internal ducting and verify seals before test run

This hole cap is a small trim piece that covers an unused or service access hole to protect the appliance internals and give a finished appearance. It reduces debris entry and minimizes snag points on the cabinet. What it does:

• Covers an unused access or mounting hole in the cabinet or control panel
• Helps keep lint, dust, and moisture out of internal cavities
• Provides a finished look and helps prevent clothing or items from catching
• Simple snap-in design for a secure fit

• One hole cap

• Disconnect power to the appliance before accessing panels or openings
• Typically snaps into place from the outer side of the panel; a small flat tool can help with removal
• Do not force or pry excessively to avoid cracking the cap or panel
• If the cap does not seat securely, check correct part and seating orientation before applying pressure

This replacement cap for a dryer restores the original protective cover that secures and seals drier components, helping keep lint and debris out and maintaining normal operation. Use it when the original cap is cracked, missing, or damaged. What it does:

• Covers and protects internal dryer components from lint and debris buildup
• Helps maintain proper airflow and reduces risk of trapping lint in moving parts
• Prevents loose parts from rattling or causing vibration-related noise
• Common symptom: visible cracks, missing cap, excessive lint accumulation, or unusual rattling

• Disconnect power (and gas supply for gas models) before starting any repair.
• Basic hand tools may be required; handle plastic parts carefully to avoid damage.
• Reassemble panels and verify operation; inspect for proper fit and clearance.

This Taptite screw is a factory thread-forming fastener used to secure panels, brackets, and internal components where specified by the manufacturer. It forms threads as it drives for a secure, long-lasting hold when replacing a missing or damaged screw.

• Fastens covers, brackets, and internal parts at the designated mounting points
• Thread-forming "Taptite" design creates mating threads in the receiving hole for a snug fit
• Helps restore alignment and reduce vibration or rattling from loose hardware
• Typical symptoms: loose or misaligned panel/handle, rattles during operation, missing or stripped screw

• Disconnect power (and shut off water/gas if applicable) before servicing
• Replace only in the exact location specified for this part; match head style and length to the original
• Start by hand to avoid cross-threading; if resistance is high, back out and re-start
• Tighten until snug; do not overtighten to prevent stripping or cracking

A small mounting bracket that secures and supports internal appliance components to keep shelves, drawers or assemblies aligned and stable. Replaces a cracked, broken or missing supporter to restore proper fit and reduce movement. What it does

• Secures an internal component or assembly in place to prevent sagging or misalignment
• Stops rattling, wobble or looseness caused by a damaged or missing bracket
• Restores correct clearance and support for the associated shelf/drawer/assembly
• Helps maintain normal operation and prevents further wear on adjacent parts

• One supporter holder bracket

• Disconnect power before starting repairs; unplug or flip the appliance breaker
• Remove nearby shelves, drawers or panels to access the damaged bracket
• Inspect mating parts for damage and replace any worn fasteners as needed
• Use basic hand tools;

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

The Dryer Top Panel Assembly is an OEM component specifically designed for LG dryers. This top panel is responsible for covering the top of the dryer and protecting internal components. 

Causes of a bad top panel can include cracks, dents, or warping of the plastic over time from repeated use and heat exposure. The coated surface can also show signs of wear like scratches, scuffs, or peeling/flaking of the finish.

Symptoms of a bad top panel include:

• drafts or air leaks around the top of the dryer 
• loose, wobbly, or misaligned panel
• exposed internal components
• diminished aesthetic appearance

This OEM LG part is also compatible with select Sears/Kenmore models.

This cabinet cover assembly replaces the dryer or washer top cabinet panel to restore the appliance's exterior protection and clean appearance. It provides a secure, factory-style fit for the machine's top section. What it does:

• Covers and protects internal components under the top of the cabinet from dust and debris
• Restores the appliance's finished appearance after damage or corrosion to the top panel
• Helps maintain proper airflow and sealing around the top area when installed correctly
• Compatible where OEM part ACQ75450501 is specified

• Installer level: moderate; basic disassembly of the appliance top may be required
• Disconnect power and, if applicable, water before starting work
• Keep mounting hardware and clips from the original panel; use only confirmed OEM fasteners

This connector bar secures and routes wiring or modules inside the appliance, keeping electrical connections stable and components properly aligned for reliable operation. Use it to restore secure connections and proper part seating. What it does:

• Provides a stable mounting and routing point for harnesses or small modules
• Helps prevent loose or pinched wires that can cause intermittent operation
• Keeps components properly aligned so connectors mate fully
• Supports safe, organized internal wiring to reduce strain on terminals

• Always unplug the appliance before starting work to avoid electrical shock
• Handle wiring gently and ensure all connectors fully seat during reassembly
• Basic hand tools are typically required; reference the service manual for disassembly steps

A molded cover cap that restores the appliance's finished appearance and helps protect internal components from dust and debris. Fits into the appliance housing where a trim or end cap is required. What it does:

• Covers and protects exposed openings or hardware on the appliance housing.
• Prevents dust, lint, and moisture from reaching internal components.
• Restores a clean, finished look to damaged or missing trim areas.
• Helps maintain proper alignment of adjacent trim pieces.

• Typically installs by snapping or pressing into place; no special tools usually required.
• Inspect surrounding trim and mounting features for damage before installing.
• Disconnect power to the appliance before working in or around internal areas for safety.
• If the cap does not seat easily, verify correct orientation and that mounting tabs are intact.