Dlg7601we Parts

This Taptite screw is a factory thread-forming fastener used to secure panels, brackets, and internal components where specified by the manufacturer. It forms threads as it drives for a secure, long-lasting hold when replacing a missing or damaged screw.

• Fastens covers, brackets, and internal parts at the designated mounting points
• Thread-forming "Taptite" design creates mating threads in the receiving hole for a snug fit
• Helps restore alignment and reduce vibration or rattling from loose hardware
• Typical symptoms: loose or misaligned panel/handle, rattles during operation, missing or stripped screw

• Disconnect power (and shut off water/gas if applicable) before servicing
• Replace only in the exact location specified for this part; match head style and length to the original
• Start by hand to avoid cross-threading; if resistance is high, back out and re-start
• Tighten until snug; do not overtighten to prevent stripping or cracking

A small mounting bracket that secures and supports internal appliance components to keep shelves, drawers or assemblies aligned and stable. Replaces a cracked, broken or missing supporter to restore proper fit and reduce movement. What it does

• Secures an internal component or assembly in place to prevent sagging or misalignment
• Stops rattling, wobble or looseness caused by a damaged or missing bracket
• Restores correct clearance and support for the associated shelf/drawer/assembly
• Helps maintain normal operation and prevents further wear on adjacent parts

• One supporter holder bracket

• Disconnect power before starting repairs; unplug or flip the appliance breaker
• Remove nearby shelves, drawers or panels to access the damaged bracket
• Inspect mating parts for damage and replace any worn fasteners as needed
• Use basic hand tools;

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

This door gasket forms a watertight seal between the appliance's tub opening and the door, keeping wash water contained during operation. Replacing a worn seal helps stop leaks and protects floors and nearby cabinetry. What it does:

• Creates a tight, water-resistant seal around the door opening
• Replaces a torn, cracked, flattened, or deformed gasket that can leak
• Common symptoms: drips from the door area, puddles at the front corners, visible damage or mildew on the seal
• Restores proper door compression and helps prevent moisture/steam from escaping

• 1 door gasket

• Disconnect power and turn off the water supply before servicing
• Remove the old gasket and thoroughly clean the channel and mating surfaces
• Seat the new gasket evenly; ensure it is fully pressed into its channel (some models use retaining bands or clips—transfer and reinstall as removed)
• Close the door to check for uniform contact, then run a short cycle to verify no leaks

The Dryer Top Panel Assembly is an OEM component specifically designed for LG dryers. This top panel is responsible for covering the top of the dryer and protecting internal components. 

Causes of a bad top panel can include cracks, dents, or warping of the plastic over time from repeated use and heat exposure. The coated surface can also show signs of wear like scratches, scuffs, or peeling/flaking of the finish.

Symptoms of a bad top panel include:

• drafts or air leaks around the top of the dryer 
• loose, wobbly, or misaligned panel
• exposed internal components
• diminished aesthetic appearance

This OEM LG part is also compatible with select Sears/Kenmore models.

This handle assembly replaces a worn, cracked or broken refrigerator door handle to restore a secure grip and smooth door operation. Designed to mount in the factory handle location for a clean, factory appearance. What it does

• Provides a finished grip surface for opening and closing the refrigerator door.
• Replaces damaged or loosened handles that can catch, wobble, or separate from the door.
• Helps prevent cabinet and door edge damage caused by attempting to open with a compromised handle.
• Matches the factory fit and mounting points for straightforward replacement when compatible.

• Disconnect power to the appliance and remove food/items from the door area before beginning work.
• Support the door while removing fasteners; some models use hidden screws or trim pieces—retain all hardware.
• Use common hand tools and avoid over-tightening fasteners to prevent handle or door damage.

This control panel is the touchpad and display assembly that lets you set and monitor the appliance's functions, temperatures, and timers. Replaces a worn, cracked, or unresponsive front control interface to restore normal operation. What it does

• Provides the user interface for selecting cycles, temperature, time, and special functions.
• Displays status, time, and error codes so you can monitor appliance operation.
• Restores responsiveness when buttons or touch controls become unresponsive or erratic.
• Replaces cracked, faded, or cosmetically damaged front controls.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Handle the display and ribbon/connectors carefully to avoid damage; use basic hand tools.
• Installation may require removing trim or bezels; keep screws and small parts organized.

This sub tub assembly replaces the inner drum housing that supports the wash basket and channels water during cycles. It restores proper drum support and helps stop rubbing, banging, or abnormal noise during operation. What it does:

• Houses and supports the wash basket so laundry tumbles correctly
• Directs wash and rinse water within the washer cabinet
• Prevents metal-to-metal contact that can cause noise or fabric damage
• Helps maintain proper drum alignment and smooth rotation

• Disconnect power and water supply before starting work
• This is a heavy, bulky component — have a helper or use lifting aids
• Inspect and replace any associated seals, gaskets, or bearings as needed