Dlgx4081b Parts

This guide assembly is a replacement slide guide that helps support and align moving components for smooth operation and reliable engagement. It restores proper tracking and reduces wobble or binding in the mechanism. What it does:

• Provides stable support and alignment for a sliding component to prevent mis-tracking and uneven movement
• Reduces noise, sticking, or binding caused by worn or damaged guides
• Helps maintain proper clearance and engagement of the moving part
• Matches OEM fit and mounting points for direct replacement

• Turn off and unplug the appliance before beginning any repair to avoid electrical shock
• Remove any obstructing panels or components to access the guide
• Inspect mating parts (slides, rails, fasteners) and replace any damaged hardware to ensure correct fit

A replacement control knob assembly that restores reliable control and user interface for compatible appliances. Designed to give a secure fit and clear detents for accurate temperature or function selection. What it does:

• Replaces a worn, cracked, or missing control knob to restore knob-to-shaft engagement
• Provides positive detents and tactile feedback for accurate setting selection
• Helps stop slipping or spinning knobs that prevent proper control
• Matches original mounting for a straightforward fit

• One knob assembly

• Turn power off to the appliance before beginning any repair to avoid shock or injury
• Remove the old knob by pulling straight off the shaft; align replacement on the shaft and push firmly until seated
• If the knob doesn't seat, confirm shaft style (splined, D-shaft, or round with adapter) and part compatibility

The LAMP, LED is an OEM component specifically designed for LG dryers. It provides illumination inside the dryer drum, a crucial safety feature for easily viewing clothes during operation. Proper lighting allows users to monitor drying progress without hindering efficiency.

Causes of a bad LED lamp can include regular wear and tear over extended use, as well as potential electrical issues disrupting current flow to the lighting source.

Symptoms of a bad LED lamp include:

• Dim or completely absent lighting inside the dryer drum
• Inability to visually inspect clothes without opening the dryer door
• Premature ending of cycles due to detection of insufficient light  

The high-efficiency LED technology in this OEM part helps maximize useful life. Replace yours today to restore optimal usability. This LG replacement part is also compatible with Sears/Kenmore models.

This is a taptite screw used to fasten components to sheet metal or plastic in your appliance. It forms its own threads as it's driven, helping secure panels, brackets, or covers that have lost or stripped fasteners.

• Provides secure fastening in pre-formed or unthreaded holes
• Helps fix loose, rattling, or misaligned panels and covers
• Commonly used for mounting small brackets and internal trim
• Useful when an original screw is missing or stripped

• Unplug the appliance or shut off power and any water supply before service
• Keep track of screw length and location; replace like-for-like
• Start by hand to avoid cross-threading; do not overtighten
• If the original hole is damaged, assess for safe re-use or repair

This clamp secures hoses, tubing or wiring to the appliance frame to help prevent rubbing, vibration and routing issues. It restores a solid attachment point so lines stay in place during normal use. What it does:

• Holds a hose, tubing or wire bundle in place to prevent chafing and abrasion
• Keeps components routed away from moving parts and hot surfaces
• Reduces rattling or vibration caused by loose lines
• Helps maintain safe, reliable connections by preventing strain on fittings

• Disconnect power and shut off water before servicing
• Use basic hand tools; avoid over-tightening which can pinch hoses or wires
• Inspect adjacent hoses/wires for wear and replace if damaged
• Take photos before removal to ensure correct reinstallation

This water tank assembly holds and delivers chilled water to the dispenser and ice system, restoring proper water flow and preventing dispenser dry-running. Direct-fit replacement designed to match the original reservoir's form and function. What it does

• Stores and supplies water for the refrigerator dispenser and ice-making components.
• Replaces cracked or damaged reservoirs that cause leaks or loss of water supply.
• Helps resolve intermittent or no-water dispense when the tank is compromised.
• Works with the refrigerator's fill and drain pathways to maintain correct water levels.

• One water tank assembly

• Disconnect power and shut off the water supply before servicing.
• Drain remaining water from the lines and tank to avoid spills during removal.
• Handle the tank carefully to avoid damaging fittings or mounting tabs.
• After installation, restore water and power, then check connections and test for leaks and proper dispense/ice fill.

The Motor Bracket is an OEM part for LG dryers. This bracket securely holds the dryer motor in place. It maintains proper alignment and spacing of the motor to allow for smooth operation of the tumble cycle.

Causes of a bad motor bracket can include cracks or breaks developed over time from repeated use and vibration, or damage due to impact or improper installation.

Symptoms of a bad motor bracket include:

• Excessive noise or grinding sounds emanating from the motor area
• The dryer not rotating or tumbling clothes properly
• Increased movement or shaking of the motor
• Poor airflow and inefficient drying performance

This OEM LG part is also compatible with some Kenmore models.

This Pipe Assembly routes water into the appliance so the dispenser and ice maker can receive a steady supply. Replacing a damaged tube restores proper water flow and helps stop leaks or pooling inside or beneath the unit. What it does:

• Carries incoming water from the household supply to the appliance's internal water system
• Restores water delivery to the dispenser and ice maker when the original tube is cracked or blocked
• Prevents leaks and water damage caused by split, corroded, or pinched tubing
• Helps eliminate intermittent flow or weak dispenser output caused by a damaged water line

• One complete pipe assembly as shown

• Shut off the refrigerator's water supply and unplug the appliance before beginning
• Handle tubing fittings carefully; use proper tools to avoid damage or overtightening
• Inspect connection points and replace seals or clips if worn; test for leaks after reinstalling

This hinge bracket secures a refrigerator door hinge assembly to the cabinet, restoring proper door alignment and smooth opening. Replace a damaged or bent bracket to stop sagging, binding, or uneven door gaps. What it does:

• Supports the door hinge, maintaining correct door alignment and seal
• Prevents door sag that can cause gaps, poor cooling, or uneven wear
• Helps stop binding or noisy door operation caused by a cracked or bent bracket
• Works as the mounting point between the hinge and cabinet/frame

• One hinge bracket

• Disconnect power and empty the door before removing hinge components to avoid injury or damage
• Loosen or remove hinge fasteners, support the door while swapping the bracket, then retighten fasteners to secure alignment
• Check door alignment and gasket seal after installation; adjust hinge position as needed
• Use appropriate tools and follow safety precautions; for complex repairs

This duct assembly channels exhaust from the appliance to the home vent, restoring proper airflow and helping reduce lint and moisture buildup. It's a direct-fit replacement for the original ducting on compatible LG units. What it does:

• Directs heated air and moisture from the appliance to the exterior vent
• Replaces damaged, crushed or disconnected ductwork that can restrict airflow
• Helps reduce lint accumulation in the cabinet/vent path when installed and maintained
• Restores a sealed connection between the appliance outlet and household venting

• Disconnect power and unplug the appliance before beginning any repair
• Follow for disassembly and routing; use proper clamps or screws to secure connections
• Inspect connected gaskets, clamps and the external vent path; replace or clean as needed
• Do not operate the appliance with obstructed or damaged venting; clean lint regularly to reduce fire risk

Locker hook secures the appliance door or access panel so it stays closed during operation. Replacing a worn or broken hook restores reliable latching and prevents the door from popping open or causing noise. What it does:

• Engages with the catch or striker to hold the door/panel closed during cycles.
• Restores proper door latching and alignment for normal operation.
• Common symptoms: door won't stay closed, rattling or intermittent latching, or door popping open.
• Small replacement part used in the latch area of the cabinet or door assembly.

• Always disconnect power (and water if applicable) before servicing the appliance.
• Access the latch area by opening or removing the door/access panel per the service manual.
• Remove and save any fasteners or clips; install the new hook in the same orientation and secure all fasteners.

The Water Valve is an OEM part for LG dryers. This valve controls the water supply to the dryer's steam setting which helps reduce wrinkles and refresh clothing.

Causes of failure can be mineral buildup overtime restricting flow, damage from freezing during winter months, or worn internal seals and mechanisms.

Symptoms of a bad water valve include:

• Inability to select or utilize the steam cycle
• Drips or leaks at the water inlet port
• Erratic water pressure during steam cycles
• Steam levels that fluctuate or cut off unexpectedly

This OEM LG part is also compatible with some Kenmore models.

This is a replacement door hinge that restores proper alignment and secure movement for a fridge or freezer door. It helps the door open and close smoothly and maintain a tight seal to preserve temperature control. What it does:

• Provides a stable pivot point so the door opens and closes correctly
• Restores proper door alignment to prevent rubbing or sagging
• Helps the door seal fully to reduce cooling loss and improve efficiency
• Replaces a worn, bent, or broken hinge that causes noise or uneven movement

• One hinge

• Unplug the appliance or shut off power before starting any repair
• Support the door securely (use a helper or prop) before removing the hinge fasteners
• Use the correct fasteners and torque to avoid stripping threads or misalignment

This display power control board assembly supplies and controls the refrigerator's display and front control functions, restoring visible indicators and panel responsiveness when the display or lights fail. What it does:

• Provides power to the control-panel display and backlight so indicators, clock and status lights illuminate
• Manages display signals and helps the control panel respond to user inputs
• Can resolve symptoms like a blank or dark display, intermittent display lighting, or unresponsive front controls
• Interfaces with the main control board and display harness to relay panel status

• Disconnect power to the appliance before starting work to avoid shock or damage.
• Handle the board by the edges and avoid static discharge; use ESD protection if available.
• Transfer any display lens, brackets or harnesses exactly as removed; ensure connectors are fully seated.

A manufacturer-configured replacement component designed to restore the appliance's original factory settings and functions. Use this part when a model-specific, pre-configured module is required to return correct operation. What it does:

• Provides the factory-specific configuration and setup programmed by the manufacturer
• Restores functions controlled by the module when configuration or programming is corrupted
• Resolves symptoms such as appliance not starting, control panel unresponsive, or intermittent/erratic operation linked to configuration errors
• Ensures compatibility with model-specific features when the appliance requires a pre-configured assembly

• Disconnect power to the appliance before starting any work
• Handle electronics carefully; observe electrostatic discharge (ESD) precautions for circuit boards or modules
• Match connectors and mounting locations to the original part; do not force connectors