Dts 181 Cr Dr Ww Parts

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

This half-width crisper drawer is used with the Hammer Head shelf design. It replaces a cracked or missing bin so you can organize produce and other fresh items and slide the drawer smoothly on the shelf rails.

• Holds produce and other items in the fresh-food compartment
• Slides on the side rails under the Hammer Head shelf to restore proper drawer operation
• Common symptoms: cracked or broken bin, won't slide/seat correctly, falls off rails, missing drawer
• Helps contain spills and keep items organized

• Empty the old drawer and pull it straight out; lift slightly to clear the stops
• Align the new pan with the rails and slide it in until fully seated—do not force
• Verify the shelf and rails are correctly positioned and level
• If removing shelves or working near lights or wiring, disconnect power for safety

This mobility wheel is the small cabinet roller that helps your refrigerator glide for cleaning or service. Replacing a worn, cracked, or missing wheel restores smooth movement and supports proper leveling and positioning. What it does:

• Supports the base of the cabinet and allows the unit to roll when repositioning
• Replaces wheels that are cracked, flat-spotted, broken, or missing
• Common symptoms: refrigerator is hard to move, drags or scrapes, sits unevenly, or shows visible wheel damage
• Aids in pulling the appliance out for maintenance or cleaning

• 1 mobility wheel

• Disconnect power and shut off the water supply before moving the appliance
• Use two people and protect flooring; raise/adjust leveling legs to relieve weight from the wheel
• Access the base/roller bracket, remove the damaged wheel, and install the new wheel securely
• Lower and re-level the unit, reconnect utilities, and verify smooth movement

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This cable clamp secures refrigerator wiring to the cabinet, keeping harnesses organized and protected. Replacing a missing or damaged clamp helps prevent chafing and vibration noise while maintaining proper clearance from fans and other moving components.

• Anchors wire harnesses in their designed routing
• Helps prevent insulation wear from rubbing or vibration
• Keeps wires clear of sharp edges and moving parts
• Common signs it's needed: missing/broken clamp, loose or dangling wires, or new rattling/buzzing noises

• Disconnect power before servicing
• Access the clamp location and note original wire routing
• Position the clamp and secure with the existing fastener; do not overtighten
• Ensure wires aren't pinched and have clearance from the fan/compressor before restoring power

This replacement defrost heater warms the freezer's evaporator area during the automatic defrost cycle. It melts accumulated frost so air can circulate, helping maintain stable temperatures and preventing ice buildup on the back wall.

• Heats the evaporator to clear frost and ice during defrost
• Helps keep airflow passages and the defrost drain path open
• Common symptoms of a failed heater: heavy frost on the back panel/coils, poor cooling or warm sections, fan noise from ice contact, cooling returns temporarily after a manual defrost
• Typically located behind the rear freezer panel

• Disconnect power before servicing; wear cut-resistant gloves
• Access the evaporator by removing the freezer's rear panel; thaw heavy ice before removal
• Transfer any clips/brackets and route wires exactly as original, keeping them away from plastic parts
• After installation, ensure wiring connections are secure and the heater is not contacting plastic surfaces

This is a half-width cantilever shelf for the refrigerator's fresh food compartment. It mounts on the rear wall rails to create adjustable storage space and replace a cracked, sagging, or missing half shelf.

• Provides adjustable storage; hangs from rear wall tracks
• Replaces a shelf that is cracked, warped, unstable, or missing
• Helps restore proper organization and usable space
• Maintains correct fit and support for refrigerated items

• Unplug the refrigerator and remove food from the area before starting
• Lift and slide the old shelf out of the wall rails; install the new shelf into the same slots
• Inspect wall rails and supports for damage before reuse
• Handle carefully to avoid chipping edges or scratching liners

This left-hand shelf front cap for refrigerator shelves secures the front trim/rail on the shelf's left side. Replace a cracked or missing cap to restore a snug, reliable fit for the front edge trim.

• Secures the front shelf trim/rail on the left side
• Helps prevent the front edge trim from loosening or falling off
• Restores a clean, finished front edge appearance
• Common symptoms: broken or missing cap, front trim won't stay attached, loose or sagging front trim

• Remove items and the shelf; handle glass carefully to avoid breakage
• Release the old cap's locking tabs, then align and snap the new cap into the front trim/rail
• Reinstall the shelf and ensure the front trim is fully seated

Left hand side. For right hand use WR17X10862

Size: 10-16 ab.

8-18 CA HX 1/2 S

This small hardware clamp is used on select refrigerators to secure tubing or wiring to the cabinet or frame. Replaces a missing or damaged clamp to keep lines stable, reduce vibration, and help prevent rubbing or leaks.

• Secures small water tubing or electrical harnesses along the cabinet/frame
• Helps prevent vibration, rattling, and abrasion of lines
• Maintains correct routing to keep lines clear of moving or hot components
• Common clues: loose or noisy lines, chafing marks, or moisture near tubing connections

• Unplug the appliance and shut off the water supply before servicing
• Note the original location and routing; take a photo for reference
• Reuse the existing mounting screw/fastener if required; tighten only enough to hold without crushing tubing
• Restore power and water, then run and inspect for vibration and leaks

This front glass shelf trim restores the finished front edge of a refrigerator glass shelf so items stay put and the shelf looks tidy. It replaces a cracked, chipped or missing front trim to help keep the glass seated and stable. What it does:

• Covers and secures the front edge of a refrigerator glass shelf for a finished appearance.
• Helps prevent items from sliding off the shelf and reduces exposure of the glass edge.
• Replace if the trim is cracked, broken, loose, or missing and allowing the glass to shift.
• Designed to snap or slide into the shelf channel and hold the glass front in place.

• Remove food and glass shelf before replacing trim; handle glass carefully to avoid breakage.
• Press the trim into the shelf channel until it seats; some models use clips — avoid forcing parts.
• If glass is damaged, replace the glass and trim together.

This tower bottom for the freezer compartment mounts beneath the evaporator/tower assembly and directs cold air while protecting internal components. It helps maintain proper airflow and supports the evaporator area for reliable cooling performance. What it does

• Supports and secures the lower portion of the freezer tower/evaporator assembly
• Channels cold air from the evaporator into the freezer compartment for even circulation
• Shields wiring and small components from ice buildup and physical damage
• Can reduce rattling or loose panel noise when the original part is cracked or broken
• Commonly replaced when the tower is cracked, warped, or missing mounting tabs

• One tower bottom (freezer) piece

• Disconnect power to the refrigerator before starting any repair to avoid shock or injury
• Removal typically requires taking out interior liners or trim panels; keep fasteners organized
• Handle plastic parts carefully to avoid breaking tabs; use appropriate tools to pry or lift panels

This rear glass shelf trim replaces the finished glass edge at the back of a refrigerator shelf, restoring a secure seat and clean appearance. It helps keep items from sliding off and reduces gaps where spills can drip. What it does:

• Provides the finished rear edge and support for a refrigerator glass shelf.
• Helps the shelf seat and lock into position; a broken or missing trim can prevent proper seating.
• Reduces food/items from shifting toward the cabinet rear and helps contain minor spills.
• Restores appearance when the original trim is cracked, chipped, or worn.

• Handle the glass trim carefully; wear cut-resistant gloves and eye protection during installation.
• Remove the shelf per the appliance's OEM instructions before replacing the trim, then refit the shelf and verify it seats properly.
• Inspect mounting clips or supports and replace if damaged to ensure a secure fit.

Size: 8-32 t. Includes 12 screws.