Dw7000km-Pjt Parts

Replaced the pump housing (which has half of the seal) and the impeller (which has the other, more important half of the seal). It was easy and would have been easier if I took more photos during disassembly. FYI, take your photos before you take it apart, not after.... Read more

Ordered the new o-rings for the pump housing and main filter screen unit. Cleaned all water hardness and other debris out of all parts. Main filter and inside parts clogged with water hardness/limescale and other debris. The 3" wide round filter internal was completely clogged with debris and some of the filter holes we crystallized with water limescale. The pump was in good shape but all the filters and parts just needed to be cleaned. Some useful tips on this Magtag Jet Clean... Read more

Replaced the water injector and seal. Read more

Removed 8 screws that retain inner door to outer door. Removed rinse aid dispenser nut and replaced O-ring around dispenser. Also, removed 2 screws that retain the latch assembly and replaced rubber grommet around latch lever that retains soap dispenser door. Read more

I rolled the old bottom rack out and pushed the new one in. With the top rack, I used a flat head screw driver to pry off the stoppers for the rack, removed the old rack from the rails, put the new rack in and put the stoppers back on. Good as new and easy to do! Read more

• Not drying dishes properly

Replaced lifter underneath the washer arm. Three torx screws to remove the piece under the washer arm. the lifter can only fit one way due to the cut of the lifter actuator lever. Access to the solenoid under the machine makes it extremely easy to replace the lifter onto the lever. Read more