Dwhd650wfp/15 Parts

The Frame is an OEM part for Bosch dishwashers that provides support and organization for your cutlery, offering a designated space for your forks, knives, spoons, and other utensils. 

A bad frame can occur due to wear and tear, accidental damage, or exposure to harsh chemicals. Signs of a faulty frame include cracks, broken sections, or difficulty in smoothly sliding the drawer in and out.

Symptoms of a bad frame include:

• Cracks or broken sections in the frame 
• Difficulty in sliding the cutlery drawer in and out
• Unorganized or unstable storage of cutlery 

Replace your damaged or worn-out frame with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Trim strip that finishes and protects an appliance edge while helping hold panels or seals in place. Replacing a damaged strip restores a clean fit and reduces gaps, vibration, and exposure to sharp edges. What it does:

• Covers and protects exposed metal or panel edges — symptom: visible edge damage or chipping.
• Helps secure panel or seal edges to maintain proper fit — symptom: loose or gapped panels.
• Reduces noise and vibration between parts — symptom: rattling or buzzing during operation.
• Helps limit moisture or debris intrusion where panels meet — symptom: dampness or dirt accumulation along seams.

• Disconnect power to the appliance before starting any work; follow lockout/tagout if applicable.
• Remove the old strip and any adhesive or fasteners; inspect the mounting surface for damage.
• Align the replacement strip, then press or snap it into position; some applications may require clips or screws.

This shaped handle cap covers the end of a dishwasher door handle to restore a finished look and protect the handle connection. It keeps the door appearance consistent and hides the fastener area for a clean, finished fit. What it does:

• Replaces a damaged, cracked or missing handle end cap to restore appearance
• Covers and protects the handle mounting point from dirt and wear
• Prevents sharp edges or exposed fasteners on the door handle
• Matches the original profile so the handle closes and looks correct

• High-level replacement; may require removal of the door trim or handle screws—refer to your model's service instructions
• Disconnect power and water to the appliance before starting work to avoid injury
• Handle with care to avoid scratching painted surfaces; use appropriate trim tools if needed
• If fasteners are damaged, inspect and replace them with OEM-recommended hardware

This shaped handle cap covers and finishes the end of a compatible appliance handle, restoring a clean appearance and helping protect the handle edge from wear. Fits as a direct replacement for a worn, cracked, or missing end cap. What it does:

• Covers the exposed end of the handle for a finished, factory look
• Protects the handle end from chips, scratches, and snagging
• Helps keep the handle grip comfortable and secure
• Restores cosmetic appearance after impact or wear

• Installer tip: this cap typically snaps or slides into place; remove any broken pieces before installing
• Use a plastic trim tool or gloved hand to avoid scratching surrounding surfaces
• Do not force excessively; if the cap does not seat easily, inspect the handle for damage or mounting clips

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This replacement cover protects internal components and finishes the appliance's exterior where installed. It restores a clean, secure appearance and helps prevent dust, moisture, and debris from reaching sensitive parts. What it does:

• Serves as a protective access panel for internal components
• Shields wiring, connectors, and electronics from dust and incidental contact
• Restores the appliance's exterior finish for a cosmetically complete repair
• Helps maintain safe operation by covering moving or live parts

• Before installing, disconnect power and water to the appliance to avoid shock or injury.
• Remove any trim or fasteners holding the old cover; keep screws for reuse.
• Align the cover carefully and secure with the original mounting hardware; do not force parts.
• If plastic clips or tabs are damaged, replace them to ensure a secure fit.

This replacement cup rack secures cups and small glassware on the dishwasher's upper rack, keeping items upright and preventing shifting during the wash for more consistent cleaning results. What it does:

• Provides dedicated support for cups, mugs and small glasses on the upper rack
• Helps prevent tipping, sliding and breakage during wash cycles
• Restores missing, cracked or warped cup-holding sections
• Compatible with dishwasher upper rack mounting points and clips

• One cup rack assembly

• Remove the upper rack for easier access; refer to your dishwasher manual for rack removal steps
• Align and snap the rack into the designated upper-rack mounting points; some models may use retaining clips or small fasteners
• Handle edges and clips carefully to avoid damage; wear gloves if needed

This insert secures or positions internal components in compatible Bosch appliances, helping restore proper fit and alignment for smooth operation. Use it to replace a worn or damaged insert that causes loose panels or shifting parts. What it does:

• Provides a secure mounting point to hold panels or internal parts in place
• Restores proper alignment to reduce rattling or movement during operation
• Replaces worn or broken inserts that can cause gaps or improper seating
• Helps maintain consistent function by keeping components correctly positioned

• Basic hand tools are typically required; disconnect power and water before starting
• Handle small plastic or metal inserts carefully to avoid damage during installation
• Keep fasteners and surrounding parts organized to ensure correct reassembly

This replacement cutlery drawer is the removable silverware tray that installs at the top of select Bosch dishwashers to organize utensils and improve cleaning access. Restores proper utensil placement and keeps forks, knives and spoons separated during the wash. What it does:

• Holds and organizes cutlery and small utensils in a dedicated top-drawer location
• Keeps items separated so water and detergent reach utensil surfaces for better cleaning
• Replaces cracked, warped or missing drawers that allow utensils to fall or shift
• Helps prevent utensils from blocking spray or interfering with the upper rack

• One cutlery drawer (single-piece silverware tray)

• High-level replacement: remove the old drawer from the upper rack and slide the new drawer into the existing guides/rails
• Check for any broken mounting tabs or guide hardware and replace if needed
• Do not force the drawer; align rails and test smooth travel before running the dishwasher
• Disconnect power to the appliance before inspecting or replacing parts if required for access

This moisture shield protects internal components from water and condensation, helping prevent moisture damage that can cause corrosion or electrical problems. Simple replacement maintains proper moisture control and appliance reliability. What it does:

• Redirects or blocks water and condensation away from sensitive parts
• Helps prevent shorting, corrosion, and moisture-related failures
• Supports normal drainage and airflow in the affected area
• Restores the appliance's original moisture-protection layout after damage or wear

• One moisture shield

• Replace with the appliance powered off and unplugged for safety
• Inspect mounting tabs and surrounding seals; replace any damaged fasteners
• Position the shield exactly as the original part to maintain drainage paths
• Address affected components before reassembly