Efme417siwo Parts

The Leveling Leg is an OEM part for Frigidaire dryers. It adjusts to stabilize the dryer on uneven floors during operation.

Subjected to vibrations, repeated adjustments expose leveling legs to wear over extended use. Causes of damage include common plastic stress fractures.

Causes of a problematic leveling leg can include:

• Loosened mounting allowing dryer movement
• Deformed, cracked or damaged plastic dampening
• Inability to adjust height or reliably stabilize weight

Symptoms include:

• Excessive shaking or noise related to an uneven base
• Difficulty configuring proper ventilation clearances
• Premature component fatigue accelerating repairs

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Wire Harness is an OEM replacement part for Frigidaire clothes dryers. It is a complex assembly of insulated wires that transmit electrical signals to various dryer components like motors, heating elements, switches, and controls. 

Symptoms of a bad wire harness include:  

• Intermittent or unreliable operation of dryer functions
• Error codes indicating electrical issues  
• Components like motors or heating elements failing to turn on
• Sparking or melting smells coming from internal wires

Causes can be damaged from repetitive movement inside the dryer cabinet, cracked insulation exposing wires to shorting, or normal wear over many years of use breaking circuits. 

This genuine Frigidaire replacement is compatible also with Electrolux, Gibson, Kelvinator, and select Kenmore dryer models. 

The Lamp Assembly is an OEM part for Frigidaire dryers. It provides illumination inside the dryer drum during operation, allowing you to easily see the contents inside.

A bad lamp assembly can be caused by a burnt-out bulb, a faulty socket, or electrical issues. Signs of a faulty lamp assembly include a dark interior drum, flickering or intermittent lighting, or a completely non-functional light.

Symptoms of a bad lamp assembly can include:

• A dark interior drum
• Flickering or intermittent lighting

Replace your malfunctioning lamp assembly with this genuine OEM part to restore lighting inside your dryer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement refrigerator door gasket seals the door to help maintain proper temperature and reduce energy loss. It restores a tight seal around the door edge for more consistent cooling and food freshness. What it does

• Forms a weather-tight seal around the refrigerator door to help keep cold air in and warm air out
• Helps reduce frost buildup and energy waste from a failing or torn seal
• Common symptom: visible gaps, torn or brittle gasket, or warm spots near the door edge
• Works as a direct-fit replacement when the factory gasket is worn, cracked, or misshapen

• Disconnect power to the appliance before attempting replacement
• Clean the door flange and seating area before installing the new gasket for best seal
• Soften and shape the gasket as needed (warm water or gentle heat can aid flexibility) and ensure the magnetic edge seats fully

This retainer is a small fastener that secures a component inside your appliance, keeping it correctly positioned during operation. Replacing a damaged or missing retainer helps eliminate looseness and noise while preventing wear from parts shifting.

• Holds a mating part or assembly firmly in place
• Restores proper fit when the original retainer is cracked, warped, or missing
• Common symptoms: loose or misaligned parts, rattling/vibration, rubbing noises
• Helps prevent premature wear from movement or chafing

• Disconnect power; shut off gas and water supplies if applicable
• Use your model's diagram to locate the retainer and match its orientation
• Transfer any reusable hardware and ensure the retainer is fully seated
• Reassemble and run a short test to check for proper operation

This spacer positions and supports adjacent components to maintain correct clearance and alignment inside the appliance, helping reduce vibration and rubbing for smoother, quieter operation. What it does

• Provides a fixed gap to keep panels, hinges, or trim pieces properly spaced
• Prevents metal-on-metal contact that can cause noise or wear
• Helps maintain door and component alignment for reliable sealing and operation
• A simple replacement for worn or missing spacers that cause rattling or misalignment

• Disconnect power to the appliance before starting any repair
• Remove the appropriate trim or access panel to reach the spacer
• Reinstall using the original fasteners; replace any corroded or damaged hardware
• If alignment issues persist after replacing the spacer, inspect surrounding mounts and hinges

Replacement mounting screw that secures panels, brackets or small components in compatible appliances. Installs quickly to replace stripped or missing fasteners and help stop rattling and restore proper alignment. What it does:

• Fastens panels, trim pieces, brackets and other small assemblies to the appliance.
• Replaces stripped, corroded or broken screws that can cause loose parts or vibration noise.
• Helps restore proper alignment of doors, drawers or trim when a missing screw allows movement.
• Small appliance fastener sized for original mounting points—use the OEM screw whenever possible.

• Disconnect power and water before starting any repair.
• Start the screw by hand to avoid cross-threading; use the correct screwdriver or bit.
• Tighten snugly but avoid overtightening to prevent stripped threads or damaged plastic.

This electronic main control board assembly replaces the dryer's primary logic/control module to restore normal cycle selection and operation. It's the central circuit that interprets controls and manages heat, timing, and motor functions. What it does:

• Receives user inputs and controls dryer cycles, timers, and electronic features
• Regulates heating and run/stop commands to the motor and heating system
• Helps prevent erratic operation caused by a failed or damaged control board
• Common symptom: dryer won't start, displays error codes, or cycles improperly

• One main control board assembly

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Avoid static damage; handle the board by edges and use anti-static precautions when possible
• Verify error codes and wiring before replacement
• If connectors or mounting hardware are damaged, replace them; this listing covers the board only

This drum mixing vane is a molded white lifter that helps tumble and redistribute laundry inside the drum for more even agitation and drying. It replaces a worn or broken vane to restore normal clothing movement and prevent fabric bunching. What it does:

• Lifts and tumbles load as the drum rotates to promote even cleaning and drying
• Helps separate garments to reduce tangling and clumping during cycles
• Restores proper drum contact when existing vanes are cracked, loose, or missing
• Compatible with models using a molded white mixing/drum vane design

• One white drum mixing vane

• Remove power and disconnect the appliance before starting any repair
• Inspect mounting boss and fasteners; replace any damaged clips or screws
• Push or snap the vane into the drum mounting location per OEM alignment; verify a secure fit before testing

This hex head screw spacer is a replacement threaded fastener that secures and spaces components while cutting its own thread in softer mating material for a tight fit. It's useful for repairs where the original spacer screw is missing or damaged. What it does:

• Acts as a spacer and fastener to hold panels, brackets, or assemblies at a set distance
• Thread-cutting tip forms secure threads in compatible materials for reliable engagement
• Helps stop movement or vibration of connected parts that can cause noise or wear
• Commonly used where the original hex-head spacer screw is corroded, stripped, or broken

• Use the correct screwdriver or wrench on the hex head to avoid rounding the fastener
• Start threads straight and apply steady pressure; do not force if resistance indicates misalignment
• Use appropriate torque — overtightening can strip the formed threads or damage parts
• Wear eye protection and follow appliance power/disconnect safety before servicing

The Harness is an OEM replacement part for Frigidaire clothes dryers. It consists of bundled wiring that connects control boards to other electrical components throughout the unit. 

Causes of failure include normal wear from vibration in motion, as well as damage due to cracks from over-bending during installs. Heat aging and moisture intrusion risks also increase with time.

Signs of a bad harness include:

• Dryer not powering on or not heating properly
• Intermittent reactions to control inputs  
• Frayed cables or conducting tape visible
• Electrical burning smells when operating

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

A replacement door gasket that restores a tight seal on the refrigerator door to help maintain consistent internal temperature and reduce energy loss. Replaces damaged, cracked, or flattened seals to improve cooling efficiency and prevent moisture intrusion. What it does:

• Seals the refrigerator door edge to block warm, humid air from entering the cabinet
• Helps stop frost buildup and excess condensation inside the fresh food compartment
• Reduces compressor run time caused by air leaks and poor temperature control
• Restores proper door alignment and contact when the original gasket is worn or torn

• One refrigerator door gasket

• Disconnect power to the appliance before starting any repair
• Remove the old gasket, clean the door flange, then position the new gasket evenly around the door
• Warm the gasket with a hair dryer or allow time to conform for a better seal if needed
• Check the seal around the full perimeter and adjust as necessary; replace screws or retainers only if specified by the OEM

This replacement cushion is a small rubber bumper that protects components and reduces vibration and noise where panels, doors, or assemblies meet. It helps keep parts aligned and prevents metal-on-metal contact. What it does:

• Absorbs shock and reduces vibration to minimize rattling or movement
• Protects surfaces from wear and prevents scraping or chafing
• Helps maintain proper spacing or alignment of panels or assemblies
• Works wherever a soft bumper or spacer is required

• Disconnect power to the appliance before servicing.
• Remove any covers or panels to access the mounting area.
• Press or seat the cushion into the locator/receptacle; replace retainers if present.

This vane directs airflow inside the appliance to help control cooling or venting. Replacing a damaged vane restores proper airflow and helps maintain even temperature and efficient operation. What it does

• Guides and directs internal air flow for proper ventilation or cooling.
• Helps seals and channels air to prevent uneven temperature or poor performance.
• Worn or broken vanes can cause reduced airflow, noisy operation, or improper venting.
• Small, molded part designed to fit in the OEM mounting location and work with the appliance's blower/damper assembly.

• One vane

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing panels or other components; keep fasteners organized for reassembly.
• Inspect surrounding seals and mounting points and replace any damaged clips or screws.