Egr8000ed0bb Parts

Color: White. This is the left side end cover. For right side use WB07K10001.

This harness module is a factory-style wire harness assembly that routes power and control signals between the appliance control and service components, restoring reliable electrical connections and proper control operation. What it does

• Connects the main control board to heating elements, sensors, igniters or switches so commands and power reach working components
• Restores interrupted circuits caused by damaged or burned wires and faulty connector terminals
• Helps eliminate intermittent operation, unresponsive controls, or parts that fail to receive power
• Can resolve symptoms such as no-heat, burners/oven not responding, or error codes linked to open/shorted harness circuits

• Disconnect power to the appliance before servicing to avoid shock or damage
• Compare the harness to the old part and follow the appliance wiring diagram for correct routing and connector placement
• Inspect connector terminals and mating parts for damage before installation; replace any damaged clips or fasteners
• Secure the harness away from heat and moving parts and verify function before reassembling the appliance

This is a replacement screw used to secure appliance panels and small components. It restores proper fastening and helps eliminate loose parts, rattling, or misaligned panels for a tight, safe fit. What it does:

• Secures panels, trim, brackets, or small assemblies to restore proper alignment
• Stops rattling or vibration caused by missing or loose fasteners
• Provides the correct threaded fastening where the original screw is lost or damaged
• Matches OEM fastening function for reliable reassembly

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread the screw in by hand first, then tighten snugly—do not overtighten to avoid stripping or cracking
• Keep small parts away from children and pets during installation

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

This is a right-side guide support that secures and aligns a sliding component so drawers or shelves operate smoothly and stay on track. Replaces a worn or broken guide support to restore proper movement and seating. What it does:

• Holds the right-side guide rail or track in place so the drawer or shelf slides evenly
• Prevents the drawer or shelf from sagging, binding, or falling off the track
• Restores proper alignment when the original guide is cracked, broken, or worn
• Works with the existing rail, clips, and mounting hardware to maintain smooth travel

• Disconnect power or unplug the appliance before accessing internal components
• Access may require removing the drawer, shelf, or front panel—use basic hand tools
• Inspect related clips, rails, and fasteners and replace any damaged pieces for best results

This oven felt seal fits around the door perimeter to cushion the door and help reduce heat loss. It restores the intended door clearance and soft contact between the oven door and frame for safer, quieter operation. What it does:

• Cushions the oven door edge to prevent metal-on-metal contact and reduce rattling
• Helps limit heat and smoke from escaping the oven cavity when the door closes
• Restores proper door clearance to prevent scraping or uneven sealing
• Commonly replaced when felt is worn, compressed, torn, or missing

• One oven felt seal as shown

• High-level replacement; remove the oven door or open hinge per your service manual before replacing the seal
• Work with the oven powered off and fully cooled; disconnect power for safety
• Press the felt into the channel or adhesive area; ensure even fit around the full perimeter

The Oven Igniter is an OEM part for Samsung ranges. It is responsible for igniting the gas to create a flame that heats the oven cavity for cooking.

A bad oven igniter can be caused by wear and tear over time, electrical issues, or damage. When the igniter malfunctions, it can result in a range of problems, such as the oven not reaching the desired temperature, uneven heating, or the inability to ignite the gas.

Symptoms of a bad oven igniter include:

• Oven not reaching the desired temperature
• Uneven heating of food
• Gas smell without ignition
• Igniter glowing but no flame

Replace your faulty oven igniter with this genuine OEM part to restore your range oven. This Samsung part can also be used on Kenmore/Sears appliances.

This blue indicator light restores the appliance's status illumination in the control area. Replace it if the original light is dim, flickering, or no longer illuminates so you can quickly see when a function is active.

• Provides a blue visual indication of operation/status on the control panel
• Helps at a glance when a feature is on
• Common fix for a light that won't turn on, is dim, flickers, or is physically damaged
• Direct-fit service part designed to connect to the original wiring and mounting points

• Disconnect power at the breaker or unplug the appliance before service
• Allow nearby surfaces and components to cool
• Access the indicator light from the control area; remove panels as needed
• Move connectors one at a time and route wiring as originally installed; test before reassembly

This end cap is a replacement terminal cover that protects and secures exposed connector ends on the appliance. It restores a finished appearance and helps prevent accidental contact with live terminals. What it does:

• Covers and protects terminal ends and wiring from contact and debris
• Helps maintain a secure connection by holding terminals in place
• Prevents shorting or arcing caused by exposed connectors
• Useful when the original cap is cracked, missing, or damaged

• Disconnect power to the appliance before servicing to avoid electric shock
• Verify fit and orientation before snapping the cap into place over the terminals
• If terminals or wiring are damaged, replace or repair those components before installing the cap

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

The Electric Wall Oven Rubber Bumper is essential for maintaining the smooth operation of your Samsung electric wall oven. This genuine OEM part ensures a secure and quiet fit between the oven components, reducing vibrations and preventing wear over time. Crafted from durable materials, the rubber bumper effectively absorbs shocks, enhancing the longevity of your appliance. Installing this rubber bumper helps maintain the precise alignment of your oven door, ensuring it closes properly and operates efficiently. Designed specifically for Samsung electric wall ovens, this part guarantees a perfect fit and easy installation. By replacing a worn or damaged bumper with the Electric Wall Oven Rubber Bumper , you can restore your ovenGÇÖs functionality and enjoy a reliable cooking experience. Trust in this genuine OEM part to provide the quality and performance you expect from your Samsung appliance.