Eiefw55hiwu Parts

This retainer is a small fastener that secures a component inside your appliance, keeping it correctly positioned during operation. Replacing a damaged or missing retainer helps eliminate looseness and noise while preventing wear from parts shifting.

• Holds a mating part or assembly firmly in place
• Restores proper fit when the original retainer is cracked, warped, or missing
• Common symptoms: loose or misaligned parts, rattling/vibration, rubbing noises
• Helps prevent premature wear from movement or chafing

• Disconnect power; shut off gas and water supplies if applicable
• Use your model's diagram to locate the retainer and match its orientation
• Transfer any reusable hardware and ensure the retainer is fully seated
• Reassemble and run a short test to check for proper operation

This electrical wire harness connects key components to deliver power and signal paths so your appliance controls and features operate reliably. It replaces a damaged or worn harness to restore proper electrical connectivity. What it does:

• Routes power and signal between control board, sensors, and accessories
• Replaces frayed, burned, or broken wiring that can cause intermittent operation
• Helps resolve symptoms like lights, fans, or controls not powering on or working erratically
• Maintains proper connector fit and wiring color-coding for correct hookups

• One electrical wire harness

• Disconnect power before inspecting or replacing the harness to avoid shock
• Confirm connector orientation and secure all clips; route wiring away from heat and moving parts
• Inspect mating connectors for damage and replace if corroded or burned

This replacement switch assembly restores on/off/control functions so your appliance responds correctly to user input. It fits the original mounting and wiring locations for a direct-fit service repair. What it does:

• Replaces a failed or intermittent control switch that can prevent the appliance from starting or responding.
• Restores reliable electrical contact for buttons, toggles, or selector functions.
• Helps eliminate symptoms like unresponsive controls, inconsistent operation, or power loss to a circuit.
• Matches OEM fit and connection points for straightforward replacement.

• Switch assembly

• Disconnect power (unplug or shut off breaker) before beginning any repair.
• Verify wiring location and take photos before removal to ensure correct reconnection.
• Use appropriate tools and avoid damage to surrounding components or harnesses.

This drum mixing vane is a molded white lifter that helps tumble and redistribute laundry inside the drum for more even agitation and drying. It replaces a worn or broken vane to restore normal clothing movement and prevent fabric bunching. What it does:

• Lifts and tumbles load as the drum rotates to promote even cleaning and drying
• Helps separate garments to reduce tangling and clumping during cycles
• Restores proper drum contact when existing vanes are cracked, loose, or missing
• Compatible with models using a molded white mixing/drum vane design

• One white drum mixing vane

• Remove power and disconnect the appliance before starting any repair
• Inspect mounting boss and fasteners; replace any damaged clips or screws
• Push or snap the vane into the drum mounting location per OEM alignment; verify a secure fit before testing

This hex head screw spacer is a replacement threaded fastener that secures and spaces components while cutting its own thread in softer mating material for a tight fit. It's useful for repairs where the original spacer screw is missing or damaged. What it does:

• Acts as a spacer and fastener to hold panels, brackets, or assemblies at a set distance
• Thread-cutting tip forms secure threads in compatible materials for reliable engagement
• Helps stop movement or vibration of connected parts that can cause noise or wear
• Commonly used where the original hex-head spacer screw is corroded, stripped, or broken

• Use the correct screwdriver or wrench on the hex head to avoid rounding the fastener
• Start threads straight and apply steady pressure; do not force if resistance indicates misalignment
• Use appropriate torque — overtightening can strip the formed threads or damage parts
• Wear eye protection and follow appliance power/disconnect safety before servicing

This outer cabinet trim frame secures and finishes the appliance front, restoring a clean appearance and proper alignment of the control and door areas. It's a straightforward replacement for damaged or bent front trim. What it does:

• Replaces a worn, cracked, or dented outer cabinet frame to restore fit and finish
• Helps align adjoining panels and maintains a flush front appearance
• Keeps internal components protected by providing structural support at the front
• Addresses visible cosmetic damage and reduces gaps that can collect dirt

• One outer cabinet trim frame

• Disconnect power before beginning any repair to reduce risk of shock or injury
• Remove adjacent trim pieces and fasteners as needed; handle painted surfaces carefully to avoid scratches
• Use proper fasteners and torque to avoid warping the frame; some shifts may require minor realignment

This door gasket is the flexible sealing strip that helps keep cold air inside your refrigerator, improving temperature stability and efficiency. It replaces worn or torn seals to reduce drafts and moisture intrusion. What it does:

• Creates an airtight seal around the refrigerator door to help maintain proper internal temperature
• Helps prevent frost buildup and condensation by keeping warm, humid air out
• Reduces energy waste caused by cool-air leaks around the door
• Can fix common symptoms like warm spots near the door, excessive frost, or an overworking compressor

• High-level replacement: usually removed from the door channel and pressed into place; may require loosening door hinges for full removal on some models
• Check that the gasket sits evenly in the channel and that the door closes flush to ensure a proper seal
• Clean the door channel and mating surface before installing to ensure good adhesion and sealing

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

This bushing provides a low-friction bearing surface for a rotating shaft, helping stabilize movement and reduce wear on the surrounding housing. Replacing a worn bushing restores smoother operation and reduces noise from shaft movement. What it does

• Supports and centers a rotating shaft or shaft end within the appliance housing
• Reduces metal-on-metal contact to lower noise and wear
• Helps prevent shaft wobble that can cause vibration or uneven operation
• Commonly replaced when movement is loose or when you hear scraping/rubbing noises

• One bushing

• Disconnect power (and gas, if applicable) before starting any repair
• Access the part by removing the appropriate panels per your model's service instructions
• Remove the old bushing carefully to avoid damaging the shaft or housing; press or tap the new bushing into place squarely

This replacement cushion is a small rubber bumper that protects components and reduces vibration and noise where panels, doors, or assemblies meet. It helps keep parts aligned and prevents metal-on-metal contact. What it does:

• Absorbs shock and reduces vibration to minimize rattling or movement
• Protects surfaces from wear and prevents scraping or chafing
• Helps maintain proper spacing or alignment of panels or assemblies
• Works wherever a soft bumper or spacer is required

• Disconnect power to the appliance before servicing.
• Remove any covers or panels to access the mounting area.
• Press or seat the cushion into the locator/receptacle; replace retainers if present.

This vane directs airflow inside the appliance to help control cooling or venting. Replacing a damaged vane restores proper airflow and helps maintain even temperature and efficient operation. What it does

• Guides and directs internal air flow for proper ventilation or cooling.
• Helps seals and channels air to prevent uneven temperature or poor performance.
• Worn or broken vanes can cause reduced airflow, noisy operation, or improper venting.
• Small, molded part designed to fit in the OEM mounting location and work with the appliance's blower/damper assembly.

• One vane

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing panels or other components; keep fasteners organized for reassembly.
• Inspect surrounding seals and mounting points and replace any damaged clips or screws.

This main electronic control board manages your appliance's functions and cycle operations, restoring reliable control of timing, power delivery, and user-command processing when the original board fails. Replaces a faulty control for normal operation. What it does:

• Receives and processes user inputs to start and run selected cycles.
• Sends power and timing signals to motors, valves, heaters, and sensors.
• Helps regulate cycle sequencing and safety interlocks.
• Common symptoms: appliance won't start, unresponsive or erratic controls, incorrect or stalled cycles, or display/indicator errors.

• Disconnect power before beginning any service to avoid shock or damage.
• Observe basic ESD precautions; avoid touching board components or contacts.
• Verify model and part number match the appliance before installing.

This replacement refrigerator door gasket creates an airtight seal around the door to help maintain proper temperatures and reduce energy loss. It restores a tight closing seal for better food preservation and fewer frost issues. What it does:

• Seals the refrigerator/freezer door to keep cold air in and warm air out
• Helps prevent moisture buildup and frost inside the compartment
• Reduces compressor run time by improving door sealing
• Restores proper door closure when the original gasket is cracked, torn, or warped

• One door gasket

• Replace gasket with the door open for easier access
• Clean the door flange and remove old adhesive/residue for a proper seal
• Re-seat the gasket around the full perimeter, checking for uniform contact and any trapped folds
• For safety, unplug the appliance or switch off power at the breaker before installing

This door gasket is the refrigerator/freezer door seal that helps keep cold air inside for consistent temperatures and efficient operation. It replaces a worn or torn seal to reduce drafts and moisture buildup. What it does:

• Creates an airtight seal around the door edge to help maintain interior temperature
• Reduces frost, condensation, and energy loss from a leaking door
• Helps keep stored food fresher by preventing warm-air intrusion
• Addresses common symptoms like visible gaps, tears, or a door that won't stay cold

• One door gasket

• Inspect the door and frame for damage or debris before installing the new gasket
• Clean mounting surface and follow OEM alignment steps for a proper seal
• Warm the gasket slightly (per OEM guidance) if needed to ease installation and improve fit

This trim ring is a replacement surface trim piece that restores the finished look and edge around the appliance opening. It provides a clean, secure edge and replaces bent, cracked, or missing trim to improve appearance and fit. What it does

• Covers and finishes the exposed edge of the appliance opening for a clean appearance
• Secures and aligns adjacent components by providing a stable mounting edge
• Addresses cosmetic damage such as dents, cracks, or paint loss around the opening
• Helps prevent small items from getting caught in the exposed edge

• One trim ring

• Disconnect power to the appliance before starting any repair
• Removal typically requires loosening mounting screws or clips; keep hardware for re-use unless damaged
• Handle edges carefully; part and surrounding metal may be sharp
• If the trim mounts to or around other components (elements, panels), support those parts during removal and reinstallation