Eiefw55hiwu Parts

This drive belt transfers motor power to the appliance's rotating components so the drum or agitator turns smoothly. Replacing a worn belt restores proper movement and reduces slipping or noise. What it does

• Wraps around the motor pulley and drum/agitator to transmit rotational force.
• Helps the drum or agitator rotate evenly for normal operation.
• Commonly linked to symptoms like a drum that won't spin, slipping or squealing noises, or burning rubber smells.
• Works as a maintenance replacement when the belt shows fraying, cracks, glazing, or loss of tension.

• One replacement drive belt.

• Disconnect power (and water if applicable) before beginning any repair.
• Follow the appliance's service manual for belt routing and tensioning; some models require removing panels or the drum/agitator assembly.
• Inspect idler pulleys, tensioners, rollers, and motor shaft for wear—replace any worn components to prevent premature belt failure.
• If you smell burning or see excessive damage, stop and verify correct part and fit before testing.

This is a mounting bracket that secures and supports appliance components, helping keep panels and assemblies aligned for stable operation. It's a simple replacement part that restores proper fit and reduces movement or rattling. What it does:

• Secures and supports a panel or internal assembly to the appliance frame
• Keeps components aligned to prevent binding or misalignment
• Reduces vibration and rattling caused by loose fittings
• Restores proper mechanical support after breakage or wear

• Disconnect power and/or water to the appliance before beginning any repair
• Use appropriate hand tools; keep track of fasteners and any shims or clips
• Beware of sharp sheet-metal edges; wear gloves and eye protection

This is a genuine OEM screw used to secure appliance components. It replaces a missing or damaged fastener so panels, brackets, or assemblies stay properly attached and the appliance operates safely. What it does:

• Secures panels, brackets, or small assemblies to the appliance frame
• Restores proper fit and alignment where a screw was lost or damaged
• Helps prevent rattling, vibration, or parts coming loose during use
• Matches original thread and length for a correct fit when replacing worn hardware

• One OEM screw as shown

• Turn power off and unplug the appliance before servicing
• Use the matching screwdriver or bit to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread or part damage
• Keep removed hardware organized so all original screws are replaced

A single replacement screw used to secure appliance trim, panels, or interior components. Replaces lost or damaged fasteners so panels and assemblies stay firmly attached and appliances operate safely. What it does:

• Secures trim pieces, control panels, brackets, or interior components
• Restores proper fit and alignment when panels are loose or rattling
• Helps eliminate vibration noise caused by missing or stripped screws
• Used wherever the OEM screw specification is required for reliable fastening

• Install with the matching screwdriver or driver bit; avoid over-tightening to prevent stripping
• Disconnect power and remove or support panels as needed for safe access
• If screw threads are damaged, replace with the exact OEM screw to ensure secure fit

This metal refrigerator door hinge replaces a worn or damaged hinge to restore smooth, secure door movement and proper alignment. Installing the correct hinge helps maintain a tight seal and prevents sagging or uneven closing. What it does:

• Supports and pivots the refrigerator door for reliable opening and closing.
• Keeps the door aligned so the gasket seals properly and cooling efficiency is preserved.
• Replaces worn or bent hardware that can cause a sagging, noisy, stiff, or misaligned door.
• Simple mechanical replacement — no electronics or sensors involved.

• Unplug the appliance and remove items from the door before starting; support the door to prevent drops or injury.
• Use the correct hand tools; keep fasteners and washers in order for reassembly.
• Reposition and test the door swing and seal after installation; adjust hinge fasteners evenly to avoid binding.

A temperature probe that senses appliance temperature and sends readings to the control board so the unit can regulate cooling or heating. Replacing a failed probe helps restore accurate temperature control and steady operation. What it does:

• Detects internal temperature and reports signals to the appliance control for proper temperature regulation.
• A worn or damaged probe can cause the appliance to run constantly, short-cycle, or struggle to maintain set temperatures.
• Can help resolve uneven cooling/heating and temperature-related error codes when replaced.
• Works as part of the appliance's temperature-sensing/control system.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Handle the sensor tip and wiring gently; avoid kinking, crushing, or contaminating the probe element.
• Match the connector, routing, and mounting to the original; secure wiring away from moving parts and extreme heat.
• After installation, restore power and ensure the appliance reaches and maintains expected temperatures.

This gasket creates a tight seal between two mating surfaces in your appliance to contain water or air and keep the system performing correctly. Replace a worn seal to stop leaks and restore reliable operation.

• Forms a secure seal between components
• Helps prevent water or air leaks at the joint
• Maintains proper pressure/airflow/temperature for the system
• Replaces gaskets that are cracked, flattened, torn, or deformed
• Address dripping, moisture accumulation, or air/steam escaping near the seal area

• Disconnect power; shut off water supply if applicable
• Note the gasket's orientation/routing before removal
• Clean and dry mating surfaces; remove old residue/adhesive
• Seat the gasket evenly and tighten fasteners uniformly; test for leaks before full reassembly

This refrigerator water filter cartridge reduces common taste and odor issues and captures sediment for cleaner-tasting water and ice. Designed as a direct replacement cartridge for compatible Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor to improve drinking water flavor
• Helps trap sediment and particulates to clear cloudy water or ice
• Supports consistent water quality for ice makers and dispenser use
• Can improve dispenser flow when an old filter is clogged

• 1 refrigerator water filter cartridge

• Turn off the water supply and follow your refrigerator's manual for removal and replacement steps
• Flush several gallons of water through the dispenser after installation to clear air and initial carbon fines
• Replace according to manufacturer recommendations or sooner if you notice reduced flow or worsened taste
• Dispose of the used cartridge per local recycling or waste regulations

This OEM part is a dryer motor assembly. The dryer motor assembly is the main motor that propels the dryer's essential functions of spinning and drying. If the dryer is no longer spinning, heating, or drying clothes effectively, it might be time for a new motor assembly. Luckily replacing the motor assembly is not a difficult process.To start, unplug the dryer and move it away from the wall. Access the back panel and remove the screws that secure it. Once the panel has been removed, locate the dryer motor assembly on the back of the dryer drum. Remove the mounting screws securing the motor to the back of the tub. Once loosened pull the old motor assembly outward to release it from the dryer. Replace with the new motor assembly and reinstall the back panel.This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand dryers.

This support mounting bracket secures internal components to the appliance chassis, restoring stable alignment and reducing vibration or rattling. Use it to replace a worn or broken bracket and help maintain proper part positioning. What it does:

• Holds and stabilizes internal assemblies or panels to the appliance frame
• Stops excessive movement that can cause rubbing, noise, or misalignment
• Restores mounting points needed for proper operation of connected parts
• Fits in locations where a small stamped/plastic bracket is required

• One support (mounting bracket) as shown

• Inspect surrounding fasteners and panels; replace any damaged screws or clips
• Use correct hardware and torque; avoid over-tightening which can crack bracket or panel
• Disconnect power before accessing internal areas; follow appliance-specific safety steps

This diffuser directs and spreads chilled air inside the refrigerator compartment for more even cooling and better food preservation. It replaces a worn or cracked diffuser to restore proper airflow distribution and reduce hot spots. What it does:

• Channels and diffuses cold air from the evaporator into the cabinet for more uniform temperatures
• Helps prevent localized warm spots that can cause premature food spoilage
• Restores proper airflow when the original diffuser is cracked, broken, or missing
• Reduces airflow noise caused by loose or damaged diffuser pieces

• Always unplug the appliance or shut off power at the breaker before servicing
• Typically installs without tools; may require removing shelves or trim to access the mounting area
• Handle the part carefully to avoid cracking the plastic during installation

This condenser coil removes heat from the refrigerant so the refrigerator can maintain proper cooling. Replaces a worn or damaged condenser to help restore normal cooling performance and compressor efficiency. What it does:

• Condenses refrigerant from a gas to a liquid by dispersing heat to surrounding air.
• Helps the compressor run at correct temperatures and prevents overheating.
• Common symptoms it can address: refrigerator not cooling well, compressor running constantly, or unusually warm cabinet.
• Works with the appliance's condenser fan and compressor to complete the cooling cycle.

• Disconnect power to the appliance before beginning any work.
• Avoid bending or damaging coil fins; handle the assembly carefully.
• Some installations may require removing the back service panel and disconnecting mounting brackets; retain all fasteners.

This is a replacement clear glass refrigerator shelf that restores a flat, easy-to-clean surface for holding food and containers. Installs into shelf supports to return usable storage space and visibility inside the compartment. What it does:

• Provides a sturdy, flat surface for storing food and containers
• Easy-to-clean tempered glass resists staining and spills
• Restores proper spacing and visibility on the shelf level
• Replace broken, chipped, or cracked shelves to prevent food damage and safety hazards

• Remove food and supports before installing; handle glass with gloves to avoid cuts
• Set shelf into side supports evenly, then lower into position—do not force
• Inspect mounting rails or clips for damage and replace if worn