Eiefw55hiwu Parts

This LED interior lamp assembly replaces a failed fridge light to restore bright, efficient illumination inside the appliance. Designed as a direct-fit replacement for the OEM lamp module, it improves visibility for food storage areas. What it does

• Provides bright, energy-efficient interior lighting for refrigerator compartments
• Replaces a non-working, flickering, or dim fridge light
• Fits into the existing light housing or module to restore normal illumination
• Helps you see contents clearly so you can find items faster

• One LED interior lamp assembly (single)

• Disconnect power to the appliance before starting any work
• Remove the light cover/diffuser per appliance instructions to access the lamp assembly
• Handle the lamp carefully and avoid forcing connectors; align and seat the module fully

This electrical wiring harness connects refrigerator components to restore reliable power and signal paths. It replaces a damaged or worn harness to help stop intermittent operation and return affected circuits to normal function. What it does:

• Routes power and control signals between components and the main control
• Restores connectivity when a frayed or broken wire causes intermittent or no operation
• Helps resolve symptoms such as non-working lights, controls, dispenser, or ice maker when caused by a failed harness
• Provides factory-style connector plugs for a direct replacement fit

• Disconnect power to the appliance before starting any work.
• Access may require removing interior panels or appliance trim; keep fasteners organized.
• Match connector shapes and colors; do not force connectors together.
• Inspect mounting points and secure harness to avoid contact with sharp edges or moving parts.

This damper is the refrigerator air-control flap that regulates airflow between compartments to help maintain consistent temperatures and proper cooling. It replaces a worn or stuck damper to restore normal airflow and temperature balance. What it does:

• Opens and closes to direct cold air where needed between freezer and fresh-food sections
• Helps maintain even temperatures and prevents one compartment from getting too warm
• Common symptom: uneven cooling or warm fresh-food section despite running compressor
• Common symptom: damper stuck or not moving, causing poor temperature control

• Disconnect power to the appliance before starting any repair
• Remove interior panels to access the damper; use basic hand tools
• Handle the damper and any wiring harness carefully to avoid damage
• After installation, verify damper operation and allow time for temperatures to stabilize

A replacement tension spring that restores proper return and balance for the appliance component it supports, helping doors and linked mechanisms move smoothly and stay aligned. Designed to match the original fit and function. What it does

• Provides tension to help a door or mechanism return to its rest position
• Restores proper balance and reduces sagging or uneven movement
• Helps eliminate light rattling or inconsistent closing caused by a worn spring
• Works as a direct replacement when the original spring is stretched, broken, or weak

• One replacement tension spring

• Disconnect power and/or unplug the appliance before starting any repair
• Handle spring under tension carefully; wear eye protection and gloves
• Verify the exact spring orientation and anchor points before removal

This retainer secures appliance panels and components to keep assemblies aligned and stable, restoring proper fit and reducing noise or vibration. Use when a clip or bracket has broken, come loose, or no longer holds parts in place. What it does:

• Holds trim, panels or internal components in position to prevent rattling and misalignment
• Replaces worn or broken clips that allow gaps or loose parts
• Helps restore a snug fit after service or component replacement
• Works as a simple fastener to maintain proper assembly alignment

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools; handle small clips carefully to avoid losing them
• Inspect surrounding clips and mounting points and replace any damaged hardware

This is a genuine replacement screw used to secure internal or external appliance components. It restores proper fastening so panels, brackets, or small parts stay firmly in place and reduces rattling or loose-fit issues. What it does

• Fastens appliance parts and panels to maintain structural fit and alignment.
• Prevents movement or vibration that can cause noise or wear.
• Replaces missing, stripped, or corroded screws to restore secure connections.
• Compatible with common mounting locations where the OEM screw is specified.

• Disconnect power to the appliance before beginning any repair.
• Use the correct screwdriver or bit to avoid stripping the head.
• Thread carefully and do not overtighten to prevent damage to threads or plastic components.
• Keep small parts away from children and pets.

This is a genuine replacement screw used to secure appliance panels and components. It provides a simple, reliable fix for loose or missing fasteners so panels and parts stay properly attached. What it does:

• Fastens panels, brackets, or components in place to restore original fit
• Replaces missing or stripped screws that cause rattling or loose parts
• Matches OEM thread and head style for correct seating and torque
• Helps eliminate vibration-related noise by securing loose pieces

• One replacement screw as shown

• Inspect mating threads and clear any debris before installing the new screw
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance safety guidelines before servicing

This cover is a replacement access panel that protects internal components and helps maintain appliance appearance. It restores the appliance's finished look and keeps wiring and parts shielded from debris. What it does:

• Shields internal components and wiring from dust, moisture, and accidental contact
• Restores the appliance's exterior appearance after service or damage
• Helps maintain proper airflow routing around covered components
• Useful when replacing or servicing internal modules that require a protective panel

• Remove power to the appliance before attempting installation to avoid shock or injury
• Installation typically requires removing nearby trim or fasteners; keep screws and clips for reuse
• Handle carefully to avoid scratching the finish or bending mounting tabs
• If mounting holes or clips don't align, recheck part number.

This push button replaces a worn, cracked, or missing control-panel button so your appliance's front controls are easy to press and responsive again. It restores user input for selecting cycles and settings. What it does

• Replaces a broken or missing control-panel push button used to select cycles, options, or settings
• Restores a firm, tactile press and reliable contact for the front control interface
• Helps fix buttons that stick, feel mushy, or no longer latch properly
• Compatible with snap-in/button-style control panels that accept this replacement

• Disconnect power to the appliance before attempting service to reduce shock risk
• Most installs are snap-in replacements accessible from the control panel; remove trim or panel as needed
• Use a non-marring tool or fingertip pressure to pry the old button out and press the new button into place

This replacement refrigerator door panel restores the exterior surface and structural fit of the appliance, helping protect internal components and maintain proper closure. It's a direct-fit part meant to replace a damaged or dented door panel. What it does

• Replaces a dented, cracked, or cosmetically damaged refrigerator door panel
• Restores proper alignment so the door closes and seals consistently
• Protects internal insulation and components from further damage
• Helps maintain appearance and resale value of the appliance

• One replacement refrigerator door panel

• Disconnect power before beginning any repair and work on a clean, stable surface
• You may need to transfer hinges, handles, gaskets, and internal trim from the old door
• Larger doors can be heavy or awkward — have a second person assist to avoid injury or damage
• If the door includes glass or electrical components, handle with care and follow OEM instructions for reassembly

This insulator is a small foam/trim piece that cushions and thermally isolates appliance panels to help maintain proper airflow and reduce vibration. It preserves fit between cabinet components for quiet, efficient operation. What it does:

• Cushions panels and components to reduce rattling or vibration noise
• Creates a thermal barrier that helps limit heat transfer between parts
• Keeps panels aligned and spaced to prevent rubbing or abrasion
• Worn or missing insulators can cause noise, vibration, or poor panel fit

• One insulator as shown

• Disconnect power before accessing panels or internal components
• Replace only the worn or damaged insulator; trim or adhesive may be needed to position some styles
• Remove surrounding trim or panels as required to reach the mounting location

This inner oven door glass panel replaces a cracked, broken or cloudy inner door glass to restore a clear view of the oven cavity and help the door maintain proper heat containment. Fits the oven door assembly where inner glass is used. What it does

• Replaces damaged or shattered inner oven door glass to remove visible cracks or clouding.
• Helps the door retain proper thermal separation so cooking performance is not affected by damaged glass.
• Stops rattling or slap caused by loose or broken inner glass inside the door.
• Restores a clean, unobstructed view of food inside the oven.

• Disconnect power (and gas supply if applicable) and allow the oven to cool completely before servicing.
• Wear cut-resistant gloves and eye protection; handle glass carefully to avoid injury.
• Many installations require removing the oven door and separating the outer and inner door panels—retain all screws and hardware for reassembly.
• Tighten fasteners evenly; do not overtighten to avoid cracking.