Eif50rd045v Parts

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

This touch-up paint restores the look of appliances with Mediterranean-colored finishes by covering small chips and scratches. It helps blend repairs for a cleaner, more uniform appearance without replacing parts. What it does:

• Covers minor paint chips, nicks and surface scratches to improve appearance
• Matches Mediterranean finish to help blend repaired areas with surrounding surface
• Helps protect exposed substrate from further wear or corrosion when applied to bare metal
• Ideal for small, visible repairs on exterior panels and trim

• Clean and dry the area before applying; remove loose paint and grease for best adhesion
• Shake well and apply thin, even coats; allow adequate drying time between coats
• Test on an inconspicuous area first to confirm color match
• Use in a well-ventilated area and keep out of reach of children

This UI board assembly is the user interface electronics that lets you command and monitor your range/oven. It restores touchpad buttons and display feedback so the appliance responds to temperature and timer settings. What it does:

• Receives and processes user inputs from touchpads or buttons
• Controls and displays oven settings, timers, and status information
• Passes commands to the main control/relay board for heating and functions
• Commonly replaced when buttons or display are unresponsive or incorrect

• One UI board assembly

• Disconnect power at the breaker before starting; risk of shock if powered
• Handle the board by the edges and avoid static discharge; wear an ESD strap if available
• You may need to remove the control panel or console to access the board; keep track of screws and connectors

This bellows is the flexible door boot seal for front-load washers. It creates a watertight connection between the outer tub and the front panel/door opening so wash water stays contained through fill, wash, and spin.

• Provides a flexible, watertight seal between the tub and door opening
• Absorbs tub movement during spin to help prevent leaks
• Typical symptoms: water leaking from the front of the washer, visible tears/cracks in the gasket, items snagging at the door opening, or persistent mildew on the seal
• Restores proper sealing to prevent drips and puddles on the floor

• Disconnect power and turn off water supply before servicing
• Remove the front/door panel as needed; release the outer retaining clamp/spring and pull the old bellows free
• Fit the new bellows onto the tub first, aligning any index marks; ensure the inner lip is fully and evenly seated
• Attach the bellows to the front panel and reinstall retaining clamps; run a quick fill/rinse to check for leaks

This replacement spring restores proper tension and movement for the original appliance mechanism, helping doors, latches or moving parts return and operate smoothly. Use it to fix sagging, loose or unresponsive components. What it does:

• Provides tension or return action for the appliance component it's fitted to
• Helps restore smooth opening, closing or latching motion
• Addresses symptoms such as parts that hang, don't return, or feel loose
• Matches the OEM form and function when installed in the correct location

• Install by matching orientation and attachment points to the original spring; retain any clips or anchors
• Use proper tools and avoid overstretching the spring during installation
• Disconnect power and follow safety precautions before servicing the appliance

This water inlet valve controls the flow of water to the refrigerator's ice maker and/or dispenser, restoring proper water supply for ice production and dispensing. Replaces a failed or leaking inlet valve to stop leaks and restore function. What it does:

• Opens to allow water into the ice maker and dispenser when signaled by the fridge controls
• Stops water flow when closed to prevent continuous filling or overflow
• Commonly replaced for symptoms like no water dispensing, slow/weak dispensing, or no ice production
• Can reduce leaking from the back of the refrigerator when the existing valve fails

• Disconnect power and shut off the household water supply before starting
• Turn off the water and relieve pressure from the line before disconnecting fittings
• Inspect and replace any worn inlet hoses or seals to ensure a leak-free installation

This diffuser directs and spreads chilled air inside the refrigerator compartment for more even cooling and better food preservation. It replaces a worn or cracked diffuser to restore proper airflow distribution and reduce hot spots. What it does:

• Channels and diffuses cold air from the evaporator into the cabinet for more uniform temperatures
• Helps prevent localized warm spots that can cause premature food spoilage
• Restores proper airflow when the original diffuser is cracked, broken, or missing
• Reduces airflow noise caused by loose or damaged diffuser pieces

• Always unplug the appliance or shut off power at the breaker before servicing
• Typically installs without tools; may require removing shelves or trim to access the mounting area
• Handle the part carefully to avoid cracking the plastic during installation

This clear plastic crisper drawer stores and protects fresh fruits and vegetables in the refrigerator, keeping produce organized and easy to access. It replaces a cracked, stained, or missing drawer to restore usable storage space. What it does:

• Holds and organizes fresh produce in the lower refrigerator compartment
• Helps contain moisture and prevent spills from spreading to other shelves
• Restores smooth sliding and proper alignment for easy opening and closing
• Works with the existing tracks and support brackets when undamaged

• One replacement clear plastic crisper drawer

• Remove contents and lift out the old drawer; slide the new drawer into the existing tracks until it seats
• Inspect rails and supports for damage before installing; replace supports separately if worn
• No tools typically required for drawer swap, but keep hands clear of pinch points
• Follow refrigerator owner's manual for any model-specific guidance and safety precautions

This clamp secures a flexible hose or line to a fitting, helping prevent leaks and keeping connections stable. It's a simple replacement that restores a proper seal and reduces vibration or hose movement. What it does:

• Tightens around a hose to hold it firmly on a barb or fitting
• Helps stop leaks from loose or worn hose connections
• Reduces hose movement and vibration that can cause wear
• Used wherever a small durable clamp is needed on water or drain lines

• One clamp

• Turn off power and water supply before servicing; drain any residual water
• Remove the old clamp and slide the new clamp into position over the hose and fitting
• Tighten securely but do not overtighten—avoid crushing the hose
• Use appropriate hand tools

This replacement 5-foot fill hose with elbow delivers water from the household supply to the appliance, restoring proper fill flow and helping stop leaks from worn or damaged inlet lines. Designed as a direct-replacement assembly for compatible refrigerators. What it does:

• Carries water from the supply valve to the appliance's inlet connection.
• Elbow fitting provides a low-profile connection to reduce kinking at tight inlets.
• Replaces cracked, split, or leaking hoses that can cause slow/no fill or visible leaks.
• Restores reliable water delivery for ice makers and dispensers when the original hose is failing.

• Two 5' fill hoses with elbow fittings (quantity: 2).

• Shut off the water supply and unplug the appliance before starting any work.
• Inspect fittings and replace any damaged clamps; hand-start fittings, then tighten with an appropriate wrench—do not overtighten.
• Check for leaks after turning the water back on and run a fill cycle to verify proper operation.

This is a replacement mounting bolt for appliance assemblies that secures panels, brackets, or components to the cabinet. Replaces a worn or missing fastener to restore proper fit and stability. What it does:

• Secures panels, brackets, or components in place to prevent rattling or misalignment
• Restores proper fastening where an original bolt is damaged, stripped, or missing
• Helps maintain appliance stability during normal use
• Compatible with the original mounting location and hardware when the OEM part number matches

• One replacement bolt

• Use the matching thread size and torque rating; do not overtighten to avoid stripping
• Replace only with the same style and length bolt for proper fit
• Disconnect power and water (if applicable) and follow appliance safety procedures before servicing