Elfw7637aw1 Parts

The Housing is an OEM part for Frigidaire washers. It holds the dispenser cup securely in place and ensures proper functioning of the detergent and fabric softener dispensing system.

This housing is specifically designed to fit within your Frigidaire washer, providing stability and support to the dispenser cup. It helps prevent leaks and ensures that the detergent and fabric softener are dispensed accurately during the wash cycle.

A bad housing can be caused by wear and tear, damage, or improper installation. Signs of a faulty lower housing include leaks, loose dispenser cup, or improper dispensing of detergent or fabric softener.

Symptoms of a bad housing include:

• Leaks or drips from the dispenser
• Loose or wobbly dispenser
• Improper dispensing of detergent 

Replace your defective or damaged housing with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The main control board is the appliance's central electronic controller, coordinating compressor, fans, defrost and the user interface. Replacing a faulty board restores proper electronic control and helps return normal operation. What it does:

• Manages timing and power for compressor, evaporator fan, condenser fan and defrost cycle
• Processes inputs from sensors and user controls to regulate temperatures and cycles
• Symptoms such as no cooling, unresponsive controls, error codes, or erratic cycling when failing
• Faults can produce blank or flickering displays or prevent the appliance from starting

• Disconnect power at the breaker before beginning service
• Handle the board by edges and avoid static discharge; use a grounded wrist strap if available
• Transfer any wiring harnesses and mounting hardware exactly as removed; do not force connectors

The Leveling Leg is an OEM part for Frigidaire washing machines. These legs are designed to securely hold the washer in place while allowing adjustable height for proper leveling on uneven surfaces.

Causes of a bad leveling leg can include threads stripping or seizing due to regular height adjustments over time, as well as cracks or breaks from heavy loads or impacts.

Symptoms of a faulty leveling leg include:

• Excessive vibrating or horizontal movement of the washer during spin cycles
• Bowing or sagging of the washer cabinet
• Draining or filling issues due to improper drainage angle
• Premature component wear from long term poor leveling

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement mounting screw that secures panels, brackets or small components in compatible appliances. Installs quickly to replace stripped or missing fasteners and help stop rattling and restore proper alignment. What it does:

• Fastens panels, trim pieces, brackets and other small assemblies to the appliance.
• Replaces stripped, corroded or broken screws that can cause loose parts or vibration noise.
• Helps restore proper alignment of doors, drawers or trim when a missing screw allows movement.
• Small appliance fastener sized for original mounting points—use the OEM screw whenever possible.

• Disconnect power and water before starting any repair.
• Start the screw by hand to avoid cross-threading; use the correct screwdriver or bit.
• Tighten snugly but avoid overtightening to prevent stripped threads or damaged plastic.

This screw is a direct-replacement fastener used to secure appliance panels and components. It provides a simple, reliable fix when a missing or damaged screw lets parts sit loose or vibrate. What it does:

• Secures service panels, trim pieces, brackets, or small components
• Restores proper fit and alignment to reduce rattling or movement
• Replaces stripped, missing, or corroded screws to maintain safe assembly
• Works wherever the OEM screw specification is required for reliable fastening

• Use the correct driver bit and turn gently to avoid stripping the head
• Ensure mating threads are clean and aligned before tightening
• Tighten until snug; do not over-torque to prevent damage to threads or parts
• Disconnect power before working near electrical components or controls

This air chamber directs and channels cold air inside the appliance to help maintain even temperatures. Replacing a damaged or cracked air chamber restores proper airflow for more consistent cooling and performance. What it does:

• Channels conditioned air from the evaporator into the cabinet to help even temperature distribution
• Prevents air leaks and redirects airflow to the correct compartments
• Can cause uneven cooling, warm spots, or frost buildup when cracked or broken
• Works with fans and ducts to maintain proper airflow balance

• One air chamber assembly

• Disconnect power to the appliance before beginning service
• Remove interior panels or shelves as needed to access the chamber; handle plastic tabs and clips carefully to avoid breakage
• Inspect adjoining ducts, seals, and mounting tabs; replace any damaged components to ensure a proper seal

Size: 6-20 x 0.312 inch.

This is a Phillips pan head machine screw commonly used to secure panels and components in appliances. It provides a reliable, low-profile head for flush fastening and easy Phillips-driver installation. What it does:

• Fastens trim, panels, or internal components where a pan head screw is required
• Designed for secure grip in metal or threaded inserts compatible with #10-16 threads
• Helps prevent loosening from vibration when installed to correct torque
• Often used in refrigeration and major appliance assemblies in limited quantities

• One Phillips pan head screw (#10-16 x 5/8")

• Use the correct #2 Phillips driver and steady pressure to avoid cam-out or stripping
• Do not overtighten; stop when snug to avoid damaging threads or mating parts
• Replace only with an identical thread size and head style to ensure fit
• Wear safety glasses when working around sharp sheet metal and springs

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

This suspension spring supports the washer tub and helps stabilize the drum during spin cycles to reduce vibration and noise. Replaces a worn or broken tub spring to restore smoother operation. What it does

• Holds and stabilizes the inner tub assembly to limit excessive movement during spins
• Helps reduce vibration and rattling that can occur from a loose or broken spring
• Prevents tub misalignment that can cause rubbing or noise
• Works with the washer's suspension system to maintain proper spin balance

• One suspension (tub) spring as shown

• Disconnect power and water supply before starting any repairs
• Springs are under tension; use caution and proper tools to remove/install
• Inspect other suspension components (shocks/rods, mounts) and replace if worn

This mounting bracket secures its associated component inside your appliance, keeping it properly positioned during operation. Replacing a bent or broken bracket helps stop rattling or vibration and restores stable, reliable performance.

• Provides a rigid mounting point to the appliance frame or assembly
• Maintains correct position and alignment of the attached component
• Helps reduce vibration and operational noise
• Common failure signs: cracks, bending, stripped holes, or the part no longer stays secured

• Disconnect power before servicing; if working on a washer, also shut off water supply
• Note the original orientation and hardware locations; transfer any clips or grommets from the old bracket
• Reinstall using existing screws and tighten evenly—do not overtighten

The Suspension Spring Bushing is an OEM part for Frigidaire washing machines. This part aids the suspension springs in absorbing vibrations and stabilizing the tub during operation. The bushings ensure that the movement is smooth and the noise levels are minimized.

Causes of a bad suspension spring bushing can include regular wear and tear from the constant load and movement, material fatigue, or improper installation that may accelerate deterioration. 

Symptoms of a bad suspension spring bushing include:

• Increased vibration or shaking of the washer, especially during the spin cycle
• Unusual noises like banging or thumping indicating the tub is not properly balanced
• Excessive movement or "walking" of the machine during use
• Wear and tear visible on the bushing, such as cracking or hardening of the material

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This oven door gasket is the flexible seal that keeps heat inside the oven cavity for consistent cooking and energy efficiency. It replaces a worn or torn seal to help restore proper door closure and oven performance. What it does:

• Seals the oven door to reduce heat loss and maintain stable cooking temperatures
• Helps prevent heat from escaping into the kitchen, improving efficiency
• Reduces temperature fluctuations that can cause uneven baking or longer cook times
• Common symptom: visible gaps, cracks, or a loose, brittle seal around the door edge

• Disconnect power to the appliance and allow the oven to fully cool before starting
• Remove the oven door or inner door panel only if required by your model; follow OEM instructions
• Press the gasket firmly into the door channel, ensuring the seal is evenly seated without twisting
• If you encounter clips or fasteners, use the correct tools and avoid stretching the gasket excessively

This cable tie secures wiring and small hoses to appliance frames and harnesses, keeping components organized and reducing wear from rubbing or vibration. It helps maintain safe routing so wires stay clear of moving or hot parts. What it does:

• Fastens wire bundles, harnesses, and small hoses to prevent movement
• Keeps wiring routed away from sharp edges and heat sources
• Reduces noise and wear caused by loose or vibrating wires
• Helps prevent chafing that can lead to insulation damage or intermittent connections

• Disconnect power before servicing electrical components
• Position ties to secure harnesses without over-tightening; trim excess tail
• Keep ties away from high-heat surfaces and moving parts
• Replace any damaged or brittle ties rather than reusing

This is a motor-mount screw used to secure the appliance motor housing. It's a direct-fit fastener that restores proper motor attachment to reduce movement and rattling caused by loose or missing hardware. What it does:

• Secures the motor to its mounting bracket or housing
• Prevents motor shifting that can cause vibration, noise, or misalignment
• Restores proper mechanical connection after strip-out or lost hardware
• Helps maintain safe operation by keeping motor fastened

• Disconnect power before servicing the appliance.
• Use the correct screwdriver or socket to avoid stripping the head.
• Thread carefully and tighten to snug; avoid over-tightening which can strip threads.
• If mounting holes or threads are damaged, repair or replace the affected components before reinstalling.

This is a replacement mounting bracket that secures appliance panels and components, restoring proper alignment and stability. A direct-fit part that helps stop loose panels, rattling, or misalignment for safe, reliable operation. What it does:

• Provides a secure attachment point for panels, trim, or internal components
• Restores correct alignment to reduce rattling and vibration
• Prevents parts from shifting or coming loose during operation
• Re-establishes proper fit where a worn or broken bracket allows gaps

• One mounting bracket

• Install with appliance powered off and disconnected from power source
• Use appropriate fasteners and torque to avoid stripping or damage
• Inspect surrounding clips and hardware; replace any damaged fasteners