Elfw7637aw1 Parts

The Pulley Assembly is an OEM component specifically designed for Frigidaire front-loading washing machines. This assembly contains the plastic pulley wheel that works in conjunction with the belt drive system to power the agitator and basket movements. 

Symptoms of a faulty pulley include:

• Abnormal noises or squealing emitting from the area  
• Slipping or intermittent engagement of wash and spin functions
• Visible cracks or fractures in the pulley housing or wheel

Causes can be from wear of the drive belt slipping off track or tension malfunctions over extended use cycles. Repeated mechanical stress from propelling the heavy tub may also lead to structural fatigue cracks.

This OEM Frigidaire part is compatible with Electrolux, Gibson, Kelvinator, and Kenmore front-loading machines.

This frame assembly replaces the damaged or worn front cabinet frame to restore a clean, secure finish and proper alignment. It helps keep the appliance exterior stable and supports adjacent trim and components. What it does:

• Provides structural support for the appliance front/cabinet and helps maintain proper panel alignment
• Restores damaged, cracked, or warped frame surfaces that can catch or interfere with doors/drawers
• Helps stop drafts, rattles, and loose trim caused by a broken or bent frame
• Matches OEM fit and mounting points for straightforward replacement when compatible

• Disconnect power and remove any packing or product contents before starting work
• Handle trim and any attached brackets or clips carefully to avoid scratching finished surfaces
• Use basic hand tools; keep OEM fasteners if not explicitly listed as included

This hex washer head screw secures appliance components and hardware, helping keep panels and assemblies fastened for safe, reliable operation. Use it to replace missing or damaged screws that allow parts to shift or rattle. What it does:

• Fastens panels, brackets, and component assemblies using a hex washer head for broad bearing surface
• Restores secure fit where stripped, missing, or damaged screws cause loose parts or vibration
• Maintains proper alignment and prevents movement that can lead to noise or additional wear
• Matches the OEM thread and length for a correct fit when replacing the specific factory screw

• Disconnect power to the appliance before beginning any repair
• Use the correct hex driver/socket to avoid stripping the head
• Thread the screw in straight and tighten until snug; avoid overtightening
• Repair or replace the threaded insert or mounting hardware before installing

A small metal mounting screw used to secure appliance panels and internal components. Simple replacement that restores proper fit and reduces rattling or loose parts when the original fastener is missing or damaged. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Holds internal components in place to maintain alignment and function
• Helps prevent vibration noise and movement from loose parts
• Suitable where the OEM listed screw size and thread match the original

• Disconnect power and water before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Keep any removed screws organized to ensure correct reassembly

A simple wire-fastening cable tie that secures wiring and small hoses to prevent rubbing, snagging, or loose routing inside the appliance. Helps keep components organized for safer, quieter operation. What it does

• Secures wiring bundles and small hoses to chassis or brackets to prevent abrasion and movement
• Helps stop intermittent shorts or electrical noise caused by wires rubbing or contacting other parts
• Keeps airflow and moving parts clear by holding wiring away from fans and belts
• Useful when replacing or re-routing harnesses during repairs

• Always disconnect power before working on the appliance.
• Loop tie around wiring or hose, pull to secure snugly, and trim excess tail; do not overtighten.
• Replace ties that are brittle or damaged; use the same routing as the original harness.
• Dispose of trimmed ends and avoid sharp edges that could cut wiring insulation.

This genuine replacement screw secures appliance panels and components so they stay tightly mounted and aligned during normal use. It's a simple, direct fix when a loose or missing screw causes rattling or parts that won't stay in place. What it does:

• Replaces a stripped, damaged, or missing mounting screw used on trim, panels, or brackets
• Restores secure fastening to stop panel vibration, gaps, or rattling noises
• Matches OEM fit and fastening function for proper alignment
• Used where a short machine screw is required for cabinet or component attachment

• One screw

• Use the correct driver size to avoid stripping the head; turn until snug — do not overtighten
• Replace only the exact screw location and type called for in the service guide
• Disconnect power or follow appliance-specific safety steps if working near electrical or moving parts
• Replace all matching fasteners for even support

This control panel is the exterior console trim that secures and presents the refrigerator's user controls, restoring a finished appearance and protecting the internal switch assembly. It replaces cracked, warped, or cosmetically damaged panels. What it does:

• Covers and protects the control switches and display area from spills and debris
• Provides the finished bezel and button openings for the user interface
• Restores a clean, secure mounting surface if the original panel is cracked or loose
• Helps prevent accidental contact with internal wiring and components

• Disconnect power to the appliance before starting any work
• Remove any trim pieces or fasteners holding the old panel; handle gently to avoid chipping
• May require basic hand tools (screwdriver, nut driver); retain removed hardware for reassembly

The front panel clip is an OEM replacement part for Frigidaire washing machines. It is a small but crucial component that helps secure and hold the front panel or control panel in place on the washer. These clips are typically located at the top or sides of the front panel, snapping or clipping into place to provide a secure and stable fit.

Causes of a bad front panel clip can include physical damage from impact or mishandling, wear and tear over time, or exposure to moisture or excessive heat. A broken or missing clip can cause the front panel to become loose or detached, potentially affecting the proper functioning of the washer's controls or creating safety hazards.

Symptoms of a bad front panel clip include:

• The front panel feeling loose or unstable
• The panel not sitting flush against the washer body
• Difficulty in properly aligning or attaching the front panel
• Visible damage or missing clips

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washer models.

The Bolt is an OEM replacement part for Frigidaire washing machines. Internally installed, these fasteners securely hold internal components like the tub, transmission, and agitator in the proper position. 

Causes of bolt failures can include wear and corrosion from repeated vibrations during spin cycles compounding over many years of use. 

Symptoms of bad bolts include: 

• Loose, wobbly, or misaligned internal components    
• Grinding noises or strange vibrations occurring  
• Leaks developing from compromised tub seals

Compatible brands include Frigidaire, Electrolux, KitchenAid, Jenn-Air, and select Kenmore models for lasting reliability.

This is the inner glass for an oven door that restores a clear view of the oven cavity and helps the door seal properly. Replacing damaged or cracked inner glass improves visibility and helps maintain oven temperature. What it does:

• Replaces cracked, chipped or spiderwebbed inner oven door glass
• Restores a clear viewing window so you can monitor cooking without opening the door
• Helps maintain the oven's internal temperature by restoring the door's barrier
• Stops rattling or vibration caused by loose or broken glass pieces

• Allow the oven to cool and disconnect power before starting; glass can be sharp—wear cut-resistant gloves and eye protection
• Some models require partial door disassembly (hinges/retainers) to remove and install the inner glass—keep screws and small parts organized
• Handle glass carefully to avoid damage; do not overtighten fasteners which can crack the glass
• Follow OEM instructions or a model-specific repair guide for proper reassembly and safety checks

A small replacement retainer clip used to secure interior trim or components so panels and shelves stay in place. Replacing a worn or broken clip restores a snug fit and reduces rattling or loose parts. What it does

• Holds trim, panels or small components in place to prevent shifting
• Prevents rattling and keeps parts aligned for proper operation
• Replaces cracked, broken or missing clips that allow parts to sag or fall
• Works wherever the OEM clip design is specified for a secure snap-fit

• Clip

• Disconnect power before servicing appliances with electrical components
• Remove surrounding trim or components carefully to access clip location
• Press or snap the clip into place; avoid forcing to prevent damage
• Keep small parts away from children and pets during installation

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and keeping connections tight for reliable appliance operation. Use it where a compact, durable clamp is required for water or drain lines. What it does:

• Holds hoses or tubes firmly to inlet/outlet fittings to reduce leaks
• Prevents hoses from slipping off during normal use or vibration
• Helps maintain proper fluid flow by keeping connections sealed
• Useful for water lines, drain hoses, and small appliance tubing

• One clamp

• Turn off and unplug the appliance and shut off water supply before starting
• Inspect the hose and fitting; replace any damaged hose before installing clamp
• Position clamp over the hose/fitting and tighten evenly for a snug fit without crushing the hose

This cabinet damper helps control the motion of a refrigerator cabinet or door assembly for smoother, more balanced movement and reduced slamming. It restores the intended counterbalance action when the original damper is worn or broken. What it does:

• Provides counterweight action to help a cabinet or door close smoothly and stay balanced
• Reduces sudden drops, slamming, and uneven door movement caused by a failed damper
• Works as the mechanical balance component within the cabinet/door hinge/damper system
• Commonly replaced when the door feels loose, drops unexpectedly, or does not stay in position

• One cabinet damper as pictured

• For safety, unplug the appliance or disconnect power before beginning work
• Basic disassembly of the cabinet/door trim or hinge may be required; follow OEM instructions
• Verify orientation and mounting location before removing the old part to ensure correct installation