Farg1011mw1 Parts

This white replacement plug fills and finishes an unused opening on the appliance, helping keep out dust and debris while restoring a clean, factory appearance. Use it where a small trim or access hole needs a discreet cover. What it does:

• Covers unused holes or access slots to protect internal components from dust and moisture
• Restores a finished, factory look to trim panels or consoles
• Helps prevent small items from falling into openings
• Simple, low-profile piece that stays recessed and unobtrusive

• No power required; work with the appliance unplugged or power turned off as a safety precaution when accessing trim
• Push the plug into the opening until it seats flush; a gentle push with a finger or soft tool is usually sufficient
• If removal is needed later, gently pry with a flat, non-marring tool to avoid scratching surrounding surfaces

Hex washer head ,10-32 x 0.375. Ground

This electrical wiring harness routes power and signals between components to restore reliable electrical connections. It replaces a damaged or worn harness to correct intermittent power, nonresponsive controls, or component failures. What it does:

• Carries electrical power and control signals between appliance modules and components
• Restores lost or intermittent electrical continuity caused by frayed wires or broken connectors
• Helps resolve symptoms like lights or components not powering on, sporadic operation, or control failures
• Maintains factory routing and connector fit for proper electrical performance

• Disconnect power before attempting any repair to avoid shock or damage
• Compare connectors and wire colors to the old harness to ensure correct replacement
• Use proper strain relief and routing to prevent chafing or pinching of wires

This replacement screw fastens panels, brackets, and internal components so assemblies stay aligned and tight during operation. With an 8-18 thread and 0.711-inch length, it matches the original hardware for a precise, reliable hold.

• Secures panels, brackets, and internal components to the cabinet/frame
• Replaces missing, stripped, or corroded screws
• Helps reduce vibration, rattling, and gaps from loose hardware
• Restores proper alignment after service or transport

• Disconnect power and shut off water/gas before servicing.
• Support panels/components while removing and installing the screw.
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten.

A single replacement screw used to secure appliance trim, panels, or interior components. Replaces lost or damaged fasteners so panels and assemblies stay firmly attached and appliances operate safely. What it does:

• Secures trim pieces, control panels, brackets, or interior components
• Restores proper fit and alignment when panels are loose or rattling
• Helps eliminate vibration noise caused by missing or stripped screws
• Used wherever the OEM screw specification is required for reliable fastening

• Install with the matching screwdriver or driver bit; avoid over-tightening to prevent stripping
• Disconnect power and remove or support panels as needed for safe access
• If screw threads are damaged, replace with the exact OEM screw to ensure secure fit

This screw is a direct-replacement mounting fastener used to secure appliance panels and internal components, restoring proper fit and reducing vibration or rattling. Simple hardware for repairs that require the correct OEM-style fastener. What it does:

• Secures panels, brackets, or internal components to maintain proper alignment
• Helps stop rattling and vibration caused by loose or missing fasteners
• Matches the original fit and length for reliable reassembly when specified
• Used wherever the appliance's service diagram or manual calls for this screw

• Disconnect power to the appliance before performing service to avoid shock or injury.
• Use the correct screwdriver or bit to avoid stripping the head.
• Start threading by hand, then tighten until snug—do not overtighten to prevent stripping or cracking.
• Replace only with the correct OEM part number when diagrams or manuals specify this screw.

This surface burner provides the cooktop heating element needed to restore a single electric range cooking zone to full function. It delivers reliable heat where a cracked, non-heating, or intermittent element causes cooking problems. What it does:

• Replaces a failed cooktop burner that no longer heats or heats unevenly
• Restores consistent heating for pots and pans on the affected cooking zone
• Fixes symptoms such as no heat, weak heat, or flickering element glow
• Works as the direct replacement heating element used beneath the cooktop surface

• Disconnect power at the breaker before attempting replacement to avoid shock
• Handle the element carefully—glass/ceramic elements and terminals are fragile
• Ensure proper seating of the element and secure electrical connections before restoring power

This replacement tube routes defrost melt and condensation away from the freezer compartment to the drain pan, helping prevent leaks and ice buildup. Fits specific Frigidaire refrigerator models—check product fit for compatibility. What it does:

• Channels defrost water from the evaporator area to the drain system to prevent pooling
• Helps stop ice accumulation that can block drains and reduce cooling efficiency
• Restores proper water flow when original tube is cracked, split, or clogged
• Compatible direct-replacement when matched to the appliance model/PN

• Disconnect power before starting any repair to avoid electrical shock
• Use appropriate clamps or retainers from the appliance as originally installed; replace damaged clips if needed

This electrical wiring harness connects and routes power and signals between fridge components, restoring reliable electrical continuity so controls, lights, and motors can operate correctly. Use this direct-replacement harness to repair damaged or worn wiring. What it does

• Routes power and signal connections between control boards, compressors, valves, lights, and sensors
• Restores lost or intermittent electrical connections that can cause controls to fail or components to stop working
• Prevents shorts and open circuits when damaged wires or broken connectors are replaced
• Matches OEM connector types and wire lengths for a direct-replacement fit

• One electrical harness

• Disconnect power at the breaker or unplug the appliance before inspecting or replacing the harness
• Compare connector shapes and wire colors to the original harness to ensure correct installation
• Secure wires away from moving parts and sharp edges; avoid pinching or excessive bending