Fcfg3062as Parts

This genuine replacement cap restores a clean, finished look and helps protect the underlying fastener or opening on your appliance. Replace a missing or damaged cap to keep components covered and looking factory-fresh.

• Covers and protects an exposed screw, hinge, or opening from dust and debris
• Restores the appliance's finished appearance
• Helps maintain secure retention of the underlying component
• Common signs of failure: missing or broken cap, cap won't stay in place, cosmetic wear, visible exposed fastener/opening

• Disconnect power before servicing; if working near water or gas lines, shut those off as applicable
• Gently pry off the old cap; avoid scratching surrounding surfaces
• Align and press the new cap until it seats/snaps securely

This burner crown is the replacement oval burner head for a 10,000-BTU gas cooktop burner. It restores the correct gas flow pattern so cookware heats evenly and burners light reliably. What it does:

• Replaces a damaged or corroded oval burner crown (burner head) for a 10K burner
• Helps restore even flame distribution and consistent heat across the burner
• Addresses symptoms like weak or uneven flame, sputtering, or burners that won't light evenly
• Works with the burner cap and base to ensure a proper seal and ignition

• One burner crown (10K oval) as shown

• Turn off gas supply and power to the appliance before servicing
• Remove cooking grates, burner caps, and ignition components as needed to access the crown
• Inspect and clean burner ports and mating surfaces before installing the new crown for best performance

This replacement cap covers and protects a small opening or fastener on your appliance. It restores a clean, finished appearance and helps keep out dust and moisture when the original cap is missing or damaged. What it does:

• Covers a screw hole or open end as designed on the unit
• Helps block debris and moisture and can reduce rattles
• Maintains a clean, finished look and protects underlying hardware
• Replace if the original cap is cracked, loose, deformed, or missing

• 1 cap

• Disconnect power and allow any hot surfaces to cool before servicing
• Use a non-marring tool to gently remove the old cap to avoid scratching
• Align and press/snap the new cap into place; do not force
• If the cap conceals a fastener, the fastener is secure before reinstalling the cap

This replacement cap covers and protects its designated opening or fastener on your appliance. It restores a clean, finished look and helps shield internal areas from dust and wear when the original cap is missing or damaged. What it does:

• Covers a specific opening, fastener, or trim end to protect the area
• Helps keep moisture, grease, and debris out of the assembly
• Restores proper fit and finished appearance
• Typical symptoms include a cracked, loose, discolored, or missing cap

• 1 cap

• Disconnect power and, if applicable, shut off gas/water before servicing
• Note the cap's orientation; gently unclip, pry, or unthread the original per model design
• Seat the new cap fully and avoid forcing or overtightening
• The cap is secure and does not interfere with moving parts

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

Color: White

This cooktop burner grate supports cookware over the gas flame so pots and pans sit level and heat evenly. Replacing a worn or damaged grate restores a stable cooking surface and proper pan-to-flame spacing.

• Provides a sturdy surface above the burner for safe, even heating
• Helps prevent tipping or wobbling of cookware
• Replace if cracked, chipped, warped, or if pans no longer sit flat
• Common symptoms include unstable cookware or visible damage to the grate

• Allow the cooktop to cool completely and shut off gas before handling
• Lift off the old grate; clean the support area if needed
• Set the new grate so feet align and sit flat on the cooktop
• Test pan stability before cooking

Replacement snap-on cap that restores a finished appearance and helps protect underlying components from dirt and accidental contact. Fits original mounting locations to cover exposed hardware and improve appliance safety and aesthetics. What it does:

• Covers and protects exposed hardware, terminals or posts to reduce debris buildup and accidental contact.
• Restores a clean, finished look to panels, trim or appliance edges.
• Helps reduce rattling or vibration noise caused by missing trim pieces.
• Use when the original cap is cracked, broken, missing or when exposed fasteners are visible.

• Always disconnect power (and water, if applicable) before attempting any repair.
• Remove the damaged cap by hand or with a small pry tool; press the replacement cap onto the mounting post until fully seated.
• Avoid excessive force during removal/installation to prevent damage to the mounting post or surrounding trim.
• If mounting posts or clips are damaged, replace those components to ensure a secure fit.

This anti-tip kit secures a freestanding range or slide-in oven to help prevent the appliance from tipping forward, improving safety during normal use. Installs at the appliance base to anchor the unit to the floor or wall. What it does:

• Anchors the range to the floor or wall to reduce the risk of tip-over when the oven door or storage drawer is opened.
• Stops the appliance from rocking or shifting during normal use or when heavy cookware is placed on the open door.
• Provides a simple mechanical safety anchor recommended after installation, floor changes, or appliance relocation.

• Anti-tip bracket and mounting hardware.

• Follow the OEM installation instructions exactly; mount to the floor or wall surface specified by the manufacturer.
• Use proper anchors for your floor or wall type (masonry anchors or wood screws as appropriate); if the provided fasteners are not suitable, obtain the correct anchors.
• Disconnect power and move the appliance per OEM guidance before attaching the bracket.

This ignitor/orifice assembly sits at the surface burner and provides both the ignition spark and metered gas flow for clean, reliable light-off. Replace it to restore quick starts and consistent flame quality. What it does:

• Provides the ignition spark at the burner via the electrode
• Meters gas through the fixed orifice to set proper flame size
• Wear, cracks, or blockage here can cause clicking with no flame or a burner that won't light without a match
• A damaged or restricted orifice may lead to small, uneven, or yellow flames

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the cooktop to cool; handle the ceramic electrode carefully to avoid damage
• Transfer any burner-specific hardware as needed and secure the spark lead connection
• After reassembly, restore gas and check all joints for leaks with a soapy-water solution; verify proper spark and flame

Replacement evaporator drain tube that channels defrost and condensation water from the evaporator to the drain pan to help prevent water pooling and leaks inside the refrigerator. What it does:

• Directs defrost and condensation water away from the evaporator to the drain pan
• Prevents water collecting in the fresh-food section or under crispers
• A cracked or clogged tube can cause leaks or ice buildup in the freezer
• Restoring proper drain flow reduces the risk of floor leaks and odor from standing water

• Disconnect power to the appliance before starting any repair
• Access may require removing interior rear/freezer panels; follow OEM service instructions
• Inspect and clear any clogs before installing; ensure tube seats securely at both ends

This cast-iron cooktop grate replaces a worn or damaged burner support so pots and pans sit securely while you cook. It restores a stable surface for cookware and keeps burners properly positioned. What it does:

• Supports cookware above the burner for safe, stable cooking
• Keeps burner caps aligned for consistent flame contact
• Replaces cracked, warped, or heavily chipped grates that cause wobbling
• Helps prevent direct contact between cookware and the cooktop surface

• One replacement cooktop grate

• Allow the range to cool completely before removing or installing the grate
• Most installations are lift-out replacements—no tools required; align over the burner and set in place
• Handle with care; cast-iron grates are heavy and can chip enamel if dropped
• Follow your appliance manual and shut off gas/power to the range

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

This electronic oven control board replaces the stove/range's main control module to restore temperature control and oven functions. It manages heating cycles, user interface signals, and timed cooking operations for reliable performance. What it does:

• Controls bake and broil elements and regulates oven temperature based on user settings
• Processes front-panel commands and displays status messages or error codes
• Can stop oven from heating or cause no display if the control fails
• Helps prevent incorrect cycle timing or intermittent heating when functioning properly

• Disconnect power to the appliance before starting work to avoid shock or injury
• Handle the board by its edges and avoid contact with circuitry; observe electrostatic-discharge (ESD) precautions
• Replace mounting screws and connector orientation exactly as removed; ensure all wire harnesses are fully seated

This hot surface igniter glows to ignite the oven's bake burner, restoring consistent ignition so your oven can reach and hold the set temperature for baking and roasting. What it does:

• Heats until glowing hot to open the gas valve and ignite the oven bake burner
• Helps the oven reach set temperature and maintain steady baking heat
• Common symptom fixer: oven won't heat or takes too long to reach temperature
• Also used when the oven clicks or cycles without lighting

• Always disconnect power and shut off the gas supply before beginning work
• Avoid touching the ceramic/glowing element; handle by the mounting bracket or connector
• Verify proper wiring connection and secure mounting for reliable operation

This factory screw secures components in your appliance, restoring a tight, rattle-free fit. Replace missing or damaged hardware to keep panels, brackets, and trim properly fastened and aligned for safe, reliable operation.

• Secures panels, brackets, trim, or internal components to the chassis
• Replaces lost, rusty, stripped, or cross-threaded screws
• Helps eliminate looseness, gaps, and vibration/rattling
• Common signs: loose/misaligned panels or trim, rattling noises, missing or rounded screw heads

• Disconnect power (and shut off gas if applicable); allow the unit to cool completely
• Match to the original location and replace one at a time to maintain alignment
• Hand-start to prevent cross-threading; tighten snugly—do not overtighten
• Use light torque when threading into plastic or thin sheet metal